145.3.1 ADD-LWPAR

ADD the assignment of a parameter block to an analog circuit type and in some cases overwrite parameters, the standard settings of which do not match.

It is possible to define a maximal 50 character long help text called „service information“ for each parameter block (par. INFO). The service information can be deleted by typing a blank as first character of parameter INFO.

Procedure Overview


Command Code	Parameter
ADD-LWPAR
	\|TYPE=NWWTK,BLNO=<number>
	,[EDP=<number>],[CTYPE=<param>]
	,[DGTPRMSI=<key-num>],[DGTPRMS=<key-num>]
	,[DGTPRMST=<key-num>],[COS=<param>]
	,[SPDC1=<number>],[SPD1=<number>]
	,[SPD2=<number>],[SPD3=<number>]
	,[SPD4=<number>],[SPD5=<number>]
	,[SPD6=<number>],[COS1=<param>],[COS2=<param>]
	,[COS3=<param>],[COS4=<param>],[COS5=<param>]
	,[PUTM=<number>],[PATM=<number>]
	,[SPDCDSS=<param>],[DGTPR=<key-num>]
	,[DGTPRC=<key-num>],[DEV=<param>],[INFO=<string>];

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.