146.3.1 CHANGE-MFCTA

The action CHANGE allows the user to update data contained in existing, initialized MFC tables.


Command Code	Parameter
CHANGE-MFCTA	MFCVAR=<number>,
	TYPE=MFCVAR
	,OPT=MISC,{BACKTYPE=<param>,FORWTYPE=<param>
	,IMP=<number>,PAR=<param>}
	,CHEXAC=<param>,[EXACFI=<keynum>]
	,CHTRDIS=<param>,[TRDISDI=<keynum>]
	,CHLCLTR=<param>,[LCLTRCD=<keynum>]
	,CHAREQ=<param>,[ADREQ=<keynum>];
	\|,OPT=SUPERV,{STADIAL=<number>,NXTSIG=<number>
	,RMVSIG=<number>,CTLF=<number>
	,RMVCTL=<number>,TNSIG=<number>
	,IMPD=<number>,IMPS=<number>
	,SIGLENF=<number>,NEXTSIG=<number>
	,SPAU=<number>,SLEN1=<number>
	,SLEN2=<number>,MFPPULS=<number>
	,MFPPAUSE=<number>,IMP2=<number>
	,MAXDGTS=<number>,WAITREC=<number>};
	\|TYPE=TBLB
	,OPT=FSIG,PHYSIG=<number>,{SIG=<param>,
	,IDX=<number>};
	\|,OPT=FORIB,EODTYPE=<param>,PHYSIG=<number>
	,{ORIG=<param>,IDX=<number>};
	\|,OPT=FORIA,PHYSIG=<number>,{STNCAT=<param>
	,DINFO=<param>,ADINFO=<number>
	,COEX=<number>,COEXTRAN=<number>
	,CATTRANS=<param>,ANICAT=<param>};
	\|,OPT=FIDENT,PHYSIG=<number>,SIG=<param>;
	\|,OPT=BSIGA\|BSIGB\|BSIGB1\|BIDENT,EODTYPE=<param>
	,{BSIG=<number>,INFO=<param>};
	\|,OPT=EVAL,EVTBL=<number>
	,CHADGT=Y,[DGTS=<hex>];
	\|,CHADGT=N;

	\|TYPF=TBLF
	,OPT=BSIGA\|BSIGB\|BSIGB1\|BIDENT
	,PHYSIG=<number>,SIGN=<param>;
	\|,ART=BSIG2,FSIG2=<param>,{PHYSIG=<number>
	,IDX=<number>,CATEGORY=<number>};
	\|,OPT=FIDENT,{ID=<hex>,CNT=<number>
	,PABXID=<hex>,PCNT=<number>
	,POS1=<number>,POS2=<number>
	,POS3=<number>,POS4=<number>
	,ANBEG=<number>,ANEND=<number>
	,APOS=<number>,BSDIRNO=<hex>
	,BSDIRCNT=<number>,FILLCHAR=<number>};
	\|OPT=DIALOUT,PHYSIG=<number>, {(min 1)
	DIGIT=<number>, INFO=<param>};

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.