147.3.2 CHANGE-NAVAR

By means of the function CHANGE NAVAR, it is possible to change a set of devices allocated to a night option.
A distinction must be made between two types of changes:

•

Change the Option Type
This corresponds to a complete redefinition of the night option and is therefore possible only by means of the DELETE and ADD functions.

•

Change the Set of Devices (for TYPE=STN only)

The parameter FUNCT is used to describe the type of change, i.e., it is possible to remove devices from the set (FUNCT=DEL) and to add devices to the existing set (FUNCT=ADD). In particular, by using FUNCT=DEL and by specifying several options for parameter NOPTNO, it is possible to search for a device within several options and to remove this device from all of them. This is necessary, for example, if the device concerned is to be cancelled.
In order to preserve the clarity, however, only several night options or several devices can be specified. It is also impossible to simultaneously add/remove several devices to/from several options.
If the first device in a night option assigned to an attendant group is deleted (FUNCT=DEL), the number of the new first device will be displayed at the ATND.

Procedure Overview


Command Code	Parameter
CHANGE-NAVAR	[NOPTNO=<number>],FUNCT=<param>
	,TYPE=STN,STNO=<number>;

Example

Search all night options for station 3100 and remove it.

Input:

CHANGE-NAVAR:FUNCT=DEL,TYPE=STN,STNO=3100;

Note

In this case the NOPTNO is missing.

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.