151.2.4 DEACTIVATE-PETRA

This command is used to deactivate the TRACE procedures again on the circuits.

For each circuit, a separate command must be given which is used to deactivate the TRACER for all processes on this circuit.

Procedure Overview


Command Code	Parameter
DEACTIVATE-PETRA	[LTG=<number>],LTU=<number>,SLOT=<number>,CCT=<number>;

Example

The TRACER is to be deactivated on module LTG=1, LTU=2, SLOT=19, circuit number=5.

Input:

DEACT-PETRA:1,2,19,5;

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.