151.3 Parameter Description

 
ADR
Address of DUMP
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
0 to FFFF
BYTE1
 
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
0 to FF
BYTE2
 
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
0 to FF
CCT
Circuit number of a module
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
0 to 63
CONT
Switch for ending the AMO
 
Type of Input
:
Single value, optional
 
Possible Values
:
Y
the AMO will not be ended
 
 
:
N
the AMO will be ended
 
Default Value
:
Y
CPU
CPU type
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
86
for 8086
 
 
 
51
for 8051
 
 
 
MM
for MAIN MICRO on a LTUR module
 
 
 
IMF
for IMF/DFE on a LTUR module
 
 
 
HDLC
for HDLC processor on a LTUR module
HEX01
1. Byte of trace job
 
 
Type of input:
 
Single Value, mandatory
 
Possible Values
 
0 bis FF
 
 
Default Value
 
0
 
HEX02
2. Byte of trace job
 
 
Type of input:
 
Single Value, mandatory
 
Possible Values
 
0 bis FF
 
 
Default Value
 
0
 
HEX64
64. Byte of trace job
 
 
Type of input:
 
Single Value, mandatory
 
Possible Values
 
0 bis FF
 
 
Default Value
 
0
 
LENGTH
Number of Trace jobs
 
Type of Input
:
Single Value, mandatory
 
Possible Values
:
1 to 64
LTG
Number of the line trunk group
 
Type of Input
:
Single value, optional
 
Possible Values
:
1 to 32
 
Default Value
:
1 (for Hicom 370)
LTU
Number of the line trunk unit
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
1-15 and 17-99
NO
Length in bytes of the DUMP area to be output for DISPLAY or
 
number of the TRACE data to be output for OUTPUT
 
Type of Input
:
Single value, optional
 
Possible Values
:
0 to 8154
in DISPLAY
 
 
 
0 to 1024
in OUTPUT
 
Default Value
:
8154
in DISPLAY
 
 
 
1024
in OUTPUT
PROC1
Receive processes to be logged unless on
 
Input Type
:
Single value, linked single value or range of values,
 
 
 
mandatory
 
Possible Values
:
0 to F
PROC2
Send processes to be logged unless on
 
Input Type
:
Single value, linked single value or range of values,
 
 
 
mandatory
 
Possible Values
:
0 to F
 
Default Values
:
no process
SEG
Hexadecimal segment value for dump address on 8086 and ROLM
 
modules (for MM, IMF or HDLC)
 
Type of Input
:
Single Value, mandatory
 
Possible Values
:
0 to FFFF
SEG1
Symbolic segment specification for 8051
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
CSEG
code segment
 
 
 
DSEG
data segment
 
 
 
XSEG
extra segment
SLOT
Specification of the slot in the LTU
 
Type of Input
:
Single value, mandatory
 
Possible Values
:
1 to 121
A suitable module must be configured for the slot addressed by PEN (AMO BCSU).
The possible Slot values depend on the systems architecture and can be found in the BCSU AMO description.
 
TYPE
Type of display, Type of module
 
Type of Input
:
Single Value, mandatory in ADD, optional in DISPLAY
 
Possible Values in the branch DISPLAY:
 
 
 
TRACE
retrieveTRACE-Memory (Default value)
 
 
 
DUMP
retrieve and output DUMP memory
 
Possible Values in the branch ADD:
 
 
 
STD (Standard module)
 
 
 
HEX (Trace job in HEX format)
 
 
 
LTUR (LTUR-module)
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.