151.4.2 Advisories

 
H01:
BUFFER EMPTY (DESIRED TRACE DATA NOT PRESENT)
 
If this message does not appear until 20 seconds after sending the output job, this means that a trace buffer segment is not yet assigned in the PP.
If this message occurs immediately after input, however, then a trace buffer segment has been assigned in the PP but is still empty.
H02:
BUFFER EMPTY (DESIRED DUMP DATA NOT PRESENT)
H03:
OUTPUT TRACE DATA WITH: NUMBER, CONTINUATION
 
Here, the user is prompted to display the data delivered by PP as often as he wishes.
H04:
TRACE BUFFER CONTAINS <xxxxx> TRACE ITEMS
 
This is the information about the number of trace items that have been received and can be output.
H05:
RAM ADDRESS AREA H’4000 - H’7000 NOT ACCESSIBLE FOR IMF/DFE PROCESSOR
 
This is the information about a not accessible storage area for an IMF/DFE processor on a LTUR module.
H99:
THE PARAMETER 'TRACEID' AND 'TRCIDTYP' HAVE TO BE INPUT BOTH
 
 
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.