152.3 Parameter Description


ACTIVE	Release or blocking of the protocol for the CP
	Type of Input	:	Single value, optional
	Possible Values	:	YES, NO
KIND	Branch parameter for selecting wanted output data
	Type of Input	:	Single value, mandatory (DISPLAY, CHANGE)
	Possible Values	:	1st function DISPLAY
			PVCDSHRT	Brief interrogation of protocol variant combination description
			PVCDLONG	Interrogation of a protocol variant combination description (complete).
			PDSHORT	Brief interrogation of the protocol descriptions
			PDLONG	Detailed interrogation of a protocol description
			VARTAB	Interrogation of the protocol variant descriptions
				2nd function CHANGE
			VARTAB	Changing the protocol variant description
			PD	Changing the protocol description
BNO	Number of blocks (with max. of 60 bytes) to be output (see function DISPLAY-PRODE)
	Type of Input	:	Single value, optional
	Possible Values	:	1 to 8
	Default Value	:	8
Bxx	Contents of the xxth byte (B00 to B59)
	Type of Input	:	Single value, optional
	Possible Values	:	Two-digit hexidecimal
	Group Condition	:	At least one byte must be specified
CS	Code set, used for further classification of the WELNAME table
	Type of Input	:	Single value, optional (DISPLAY)
		:	Single value, mandatory (CHANGE)
	Possible Values	:	0-7
	Default Value	:	0
IDENT	Identifier of the protocol
	Type of Input	:	Single value, optional (CHANGE)
	Possible Values	:	Two-digit hexidecimal
			00 to FE
NO	Number of the byte for memory addressing
	Type of Input	:	Single value, optional
	Possible Values	:	0 to 500
	Default Value	:	0
SRC	Branch parameter for selecting the origin of the
	Type of Input	:	Single value, mandatory (DISPLAY)
	Possible Values	:	HD Data to be output is on HD
			DB Data to be output is in DB
PDA1	Name of first alternative protocol descriptor to be used
	Type of Input	:	Single value, optional
	Possible Values	:	See parameter PDNAME
PDA2	Name of second alternative protocol descriptor to be used
	Type of Input	:	Single value, optional
	Possible Values	:	See parameter PDNAME
PDBLK	Name used for addressing the PD table
	Type of Input	:	Single value, mandatory
	Possible Values	:	MTNAME, MTIDENT, WELHEX, STDWEL, HLCTAB, BCLLCTC,
			BCLLCL1, TRSPEED, FACTAB, CAUNAME,CAUIDNT
			WELNAME,TIMER, WELMAND
	The parameter values are the set values of the memory
PDNAME	Name of the protocol in the database
	Type of Input	:	Single value, optional (COPY)
			Single value, mandatory (CHANGE,DISPLAY)
	Possible Values	:	PD01, PD02, PD03, PD04, PD05, PD06, PD07,
			PD08, PD09, PD10, PD11, PD12, PD13, PD14
PDNORM	Name of the standard protocol descriptor to be used
	Type of Input	:	Single value, optional
	Possible Values	:	See parameter PDNAME
PDNO	Number of the protocol on HD
	Type of Input	:	Single value, mandatory (COPY)
			Single value, &, &&, optional (DISPLAY)
	Possible Values	:	1-50
			The value specified is checked with the files on the HD.
PDSTRING	Text string for the description of a protocol
	Type of Input	:	Single value, optional
	Possible Values	:	Text, 25 chars.
PROTVAR	Protocol variant
	Type of Input	:	Single value, mandatory (CHANGE)
	Possible Values	:	ANALOG	"analog protocol"
			CORNV2	CorNet protocol from SP300-V2.3
			CORNV2R	CorNet protocol from SP300-V2.3
			CORNV3	CorNet protocol from SP300-V3.1
			CORNV3R	CorNet protocol from SP300-V3.1
			CORNV33	CorNet protocol from SP300-V3.3
			CORNV33R	CorNet protocol from SP300-V3.3
			ECMA1	Protocol ECMA QSIG V1
			ECMA1R	Protocol ECMA QSIG V1 reserved
			ECMAV2	Protocol Cornet-NQ Issue 2.1 Dec.96 basis ETSI
			ECMAV2R	Protocol qsig etsi ETS 300 172 3rd. with SS 2nd.
			ETSI	Standard-EURO-ISDN
			SWISNET2	Swissnet2,Swiss CO protocol
			FRA	Numeris, French cornet co protocol
			SPA	Protocol Spain
			FIN	Protocol Finland
			POR	Protocol Portugal
			BEL	Protocol Belgium
			DEN	Protocol Denmark
			NDL	Netherlands
			GB	Great Britain
			AUST0	Australia T0
			AUST2	Australia T2
			Q931R5	Q931 reserve 5
			Q931R6	Q931 reserve 6
			Q931R7	Q931 reserve 7
			Q931R8	Q931 reserve 8
			CSN7	China 1
			CSN7R2	China 2
			PSS1V2	Protocol Cornet-NQ Issue 2.1 Dec.96 basis ETSI
			PSS1V2R	Protocol qsig iso ISO/IEC 11572 2nd. with SS
			RES3	Reserve protocol 3
			RES4	Reserve protocol 4
			RES5	Reserve protocol 5
			RES6	Reserve protocol 6
			EDSGER	Protocol EDSS1 Germany
			EDSAUT	Protocol EDSS1 Austria
			EDSSUI	Protocol EDSS1 Switzerland
			EDSFRA	Protocol EDSS1 France
			ETSI	Standard Euro ISDN
			EDSR3	Protocol EDSS1 Reserve 3
			EDSR4	Protocol EDSS1 Reserve 4
			EDSR5	Protocol EDSS1 Reserve 5
			EDSR6	Protocol EDSS1 Reserve 6
			EDSR7	Protocol EDSS1 Reserve 7
			EDSR8	Protocol EDSS1 Reserve 8
			EDSS1NET	Protocol EDSS1 net side
			EDSS1NETR	Protocol EDSS1 net side
			SBEDSR1	Station protocol EDSS1 Reserve 1
			SBEDSR2	Station protocol EDSS1 Reserve 2
			SBEDSR3	Station protocol EDSS1 Reserve 3
			SBEDSR4	Station protocol EDSS1 Reserve 4
			SBQ9311	Station protocol Q931-1
			SBDSS1	Station protocol DSS1
			SS7ISUP	SS7-Isup Ref-T user side
			SBNIBRI	SBNIBRI protocol
			ATT4ESS	AT&T ISDN PRI
			ATT4ESSR	AT&T ISDN PRI reserve
			MCI250	DMS-250 ISDN PRI
			MCI250R	DMS-250 ISDN PRI reserve
			MCI600	DEX600 ISDN PRI
			MCI600R	DEX600 ISDN PRI reserve
			SPRINT	SPRINT ISDN PRI
			SPRINTR	SPRINT ISDN PRI reserve
			NI2	National ISDN PRI
			NI2R	National ISDN PRI reserve
			NI2NET	National ISDN PRI net side
			NI2NETR	National ISDN PRI net side, reserve
			CORNUS	Protocol CORNET-N for US
			CORNUSR	Protocol CORNET-N for US, reserve
PVCDNO	PVCD number of protocol on HD
	Type of Input	:	Single value, mandatory (COPY)
			Single value, &, &&, optional (DISPLAY)
	Possible Values	:	1-40
			The value specified is checked with the files on the HD.
SETNO	Number for addressing the WELMAND table
	Type of Input	:	Single value, optional (DISPLAY)
			Single value, mandatory (COPY)
	Possible Values	:	0-255
	Default Value	:	0
SEC	Branch parameter for selecting the memory area
	Type of Input	:	Single value,mandatory (CHANGE)
	Possible Values	:	ORG	administration part
			WELMAND	WELMAND table
			WELNAME	WELNAME table
			TIMER	TIMER table
			RESTP	other tables defined by PDBLK
TIMEMS	Time in milliseconds
	Type of Input		Single value, mandatory
	Possible Values		0-999
TIMERID	Identification of timer
	Type of Input	:	Single value, mandatory (CHANGE)
			Single value, optional (DISPLAY)
	Possible Values	:	T301, T302, T303, T304, T305, T306, T307,
			T308, T309, T310, T311, T312, T313, T314,
			T316, T317, T318, T319, T320, T321, T322,
			T323, T382, T384, T385, T386, T30X2, T408
Description of Timer T311 (the same terminology is in force as written in ITU-T Q.931 cahpter 9.2 "Timers in the user side"):
Timer Number:			T311
Time-out value:			5 .. 9 s ( T303 < T311 < T310 )
State of call:			U9 Incoming Call Proceeding
Cause for start:			CALL PROC sent
Normal stop			ALERT or DISC sent
At the first expiry:			Send ALERT
At the second expiry:			Timer is not restarted
Cross Reference:			Optional
TIMESEC	Time in seconds of timer defined by parameter TIMERID
	Type of Input	:	Single value, mandatory
	Possible Values	:	0-65535
TYPE	Branch parameter for COPY
	Type of Input	:	Single value, mandatory
	Possible Values	:	PVCD	All PDs belonging to a PVCD must be loaded
			PD	A specific PD must be loaded

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.