152.4.2 Advisories


H02:	PD @@@@ has been overwritten by copying.
H03:	PD @@ has been stored to location @@@@.
H04:	IMPORTANT! PD @@@@ is now deactivated. The PD has to be activated with the following command: CHANGE-PRODE:PD,@@@@,ORG,,Y;
H05:	Upper limit @@@ of memory has been exceeded.
H06:	There are none of the wanted PVCDs on HD.
H07:	There are none of the wanted PDs on HD.
H08:	There is no PVCD loaded.
H09:	There is no PD stored in @@@@.
H10:	Important! ACTIVE=YES in the command line is ignored. The PD has to be activated with the following command: CHANGE-PRODE:PD,@@@@,ORG,,Y;

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.