154.6.1 Appendix 2, Part 1: Initblocks 0 till 20

Longtimer	Default (ms)	Description	Remark
L1	0	reserve
L2	0	reserve
L3	0	reserve
L4	0	reserve
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	0	reserve
S2	0	reserve
S3	0	reserve
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	reserve
P2	0	reserve
P3	0	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	200	signal key duration (50-1000 ms)
L2	600	CO release time minimum (50-1000 ms)
L3	10000	supervision of subsequent ringing (1000-15000 ms)
L4	150	min. time release acknowledgement from CO after release from PBX (50-1000 ms)
L5	0	reserve
L6	5000	splash ring after early guard (1000-15000 ms)
L7	10000	remote blocking after CO don’t release (1000-30000 ms)

Shorttimer	Default (ms)	Description	Remark
S1	200	PBX release time (40-250 ms)
S2	70	min. time for charge pulse (16-500 ms)
S3	90	minimum charge pulse pause (16-500 ms)
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	1	for incoming seizure
		0	without loop monitoring and early guard
		1	with early guard and ringing current
P2	0	call charge recording
		0	without
		1	with 50 Hz
P3	0	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	200	signal key duration (50-1000 ms)
L2	4	dial tone transmission delay (4-2000 ms)
L3	10000	supervision of subsequent ringing (1000-15000 ms)
L4	4	delay for through-connection of speech path after answer (4-800 ms)
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	0	reserve
S2	70	min. time for charge pulse (16-250 ms)
S3	90	minimum charge pulse pause (16-500 ms)
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	reserve
P2	0	call charge recording
		0	without
		1	with
P3	0	if used as a station line (BW only)
		0	grounding of one wire
		1	grounding of both wires
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	300	min. release time CO (48-1200 ms)
L2	600	potential gap on backward release (400-800 ms)
L3	0	reserve
L4	0	reserve
L5	0	reserve
L6	200	time between seizure acknowledgement and start-of-dial signal (100-300 ms)
L7	152	min. time for end-of-digit (100-200 ms)

Shorttimer	Default (ms)	Description	Remark
S1	32	potential reversal on seizure acknowledgement (20-250 ms)
S2	32	potential reversal on start-of-dial signal (20-250 ms)
S3	32	potential reversal on end-of-dial signal (20-250 ms)
S4	32	potential gap on seizure acknowledgement (20-250 ms)
S5	32	potential gap on start-of-pulsing signal (20-250 ms)
S6	32	potential gap on end-of-dial (20-250 ms)
S7	30	min. time for incoming seizure (10-70 ms)
S8	20	min. dial pulse length (5-50 ms)
S9	72	dial pulse tolerance (30-110 ms)
S10	100	min. time for CO signaling (50-200 ms)
S11	12	min. duration of dialing pause (4-80 ms)
S12	70	min. time after seizure acknowledgement (4-100 ms)
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	1	seizure acknowledgement
		0	delay dial
		1	temporary
		2	permanent
		3	gap
P2	1	start-of-dial
		0	gap
		1	temporary
		2	permanent
		3	delay dial
P3	0	end-of-dial
		0	gap
		1	temporary
		2	permanent
P4	0	backward release
		0	reversal
		1	gap
P5	1	open-circuit potential
		1	+/ A
		2	-/ A
P6	0	dial pulse frequency
		0	10 Hz
		1	20 Hz
P7	0	after flash signal from the DID line if the subscriber is busy
		0	override
		1	call AC
		2	no reaction
P8	0	seizure inhibition
		0	A/B potential free
		1	A/B potential reversed
		2	A/B potential same as for open circuit
P9	0	if CO don’t release
		0	line alarm
		1	no line alarm
P10	0	supervision time after release
		0	line alarm after 30 sec. on missing release acknowledgement
		n	line alarm after n*30 sec.
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	forward release from CO
		0	process
		1	ignore

Longtimer	Default (ms)	Description	Remark
L1	748	forced pause between end-of-dial and answer (300-1000 ms)
L2	20	min. time for DID pulse (16-44 ms)
L3	80	min. time for 50 Hz release pulse (60-200 ms)
L4	328	max. time for charge pulse (100-500 ms)
L5	400	time for reestablishment of circuit (100-800 ms)
L6	250	duration of circuit establishment pulse (100-800 ms)
L7	1000	max. seizure pulse length until recognition of seizure acknowledge from CO (80-5000 ms)

Shorttimer	Default (ms)	Description	Remark
S1	132	minimum charge pulse pause (80-200 ms)
S2	60	min. time for charge pulse (40-80 ms)
S3	100	max. time for DID pulse (80-132 ms)
S4	16	min. time for DID Pulse pause (12-32 ms)
S5	84	max. time for DID pulse pause (68-88 ms)
S6	80	max. time for call tracing pre-pulse (40-120 ms)
S7	28	min. time for recognitionof seizure acknowledgement (12-80 ms)
S8	28	min. time for establishment acknowledgement (12-80 ms)	12 ms for F2-CO
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	answering with
		0	- / A
		1	+ / A
P2	0	reserve
P3	0	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	12000	ringing pause supervision (5000-32000 ms)
L2	100	signal key duration (50-500 ms)
L3	300	min. ringing time (60-500 ms)
L4	328	max. charge pulse (160-500 ms)
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	132	minimum charge pulse pause (80-200 ms)
S2	60	min. time for charge pulse (40-80 ms)
S3	0	reserve
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	1	grounding
		1	a- wire
		3	a- and b- wire
P2	0	reserve
P3	0	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	500	forced pause between ringing or busy tone to CO (100-12000 ms)
L2	220	release interruption ( ICLLP only) (80-1000 ms)
L3	0	reserve
L4	0	reserve
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	40	min. time for incoming seizure from CO (20-250 ms)
S2	24	min. time for DID pulse (12-40 ms)
S3	96	DID pulse tolerance (40-120 ms)
S4	16	min. time for DID pulse pause (12-40 ms)
S5	112	DID pulse pause tolerance (40-200 ms)
S6	120	min. time for release from CO (40-250 ms)
S7	160	end-of-dial interruption (ICLLP only) (60-240 ms)
S8	60	difference between end-of-dial and release interruption (S7-S6) (20-250 ms)
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	4	end-of-dial signal to CO (after answer from DH)
		0	no independent
		1-6	independent after 1-6 digits
P2	0	CO-traffic
		0	release
		1	reserve
P3	0	Internal-traffic
		0	release
		1	reserve
		2	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	500	forced pause between ringing or busy tone to CO (100-12000 ms)
L2	0	reserve
L3	0	reserve
L4	0	reserve
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	40	min time for incoming seizure from CO (20-250 ms)
S2	24	min. time for DID pulse (12-40 ms)
S3	96	DID pulse tolerance (40-120 ms)
S4	16	min. time for DID pulse pause (12-40 ms)
S5	112	DID pulse pause tolerance (40-200 ms)
S6	120	min. time for release from CO (40-250 ms)
S7	0	reserve
S8	60	difference between end-of-dial and release interruption (S7-S6) (20-250 ms)
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	4	end-of-dial signal to CO (after answer from DH)
		0	no independent
		1-6	independent after 1-6 digits
P2	0	CO-traffic
		0	release
		1	reserve
P3	0	internal-traffic
		0	release
		1	reserve
		2	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	500	forced pause between ringing or busy tone to CO (100-12000 ms)
L2	0	reserve
L3	0	reserve
L4	0	reserve
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	40	min. time for incoming seizure from CO (20-250 ms)
S2	24	min. time for DID pulse (12-40 ms)
S3	96	DID pulse tolerance (40-120 ms)
S4	16	min. time for DID pulse pause (12-40 ms)
S5	112	DID pulse pause tolerance (40-200 ms)
S6	120	min. time for release from CO (40-250 ms)
S7	0	reserve
S8	60	difference between end-of-dial and release interruption (S7-S6) (20-250 ms)
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	4	end-of-dial signal to CO after answer from DH
		0	no independent
		1-6	independent after 1-6 digits
P2	0	CO-traffic
		0	release
		1	reserve
P3	0	internal-traffic
		0	release
		1	reserve
		2	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	10000	supervision of subsequent ringing (1000-30000 ms)
L2	500	forced pause between ringing or busy tone to CO (100-12000 ms)
L3	240	ground pulse to CO (24-3000 ms)
L4	120	flash to CO (24-2000 ms)
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	140	AC ring detection 25/50 Hz (80-250 ms)	only if P3=0
S2	200	AC ring detection 16 2/3 Hz (80-250 ms)	only if P3=1
S3	144	S1 + 4 (80-250 ms)
S4	204	S2 + 4 (80-250 ms)
S5	40	min. time for incoming seizure from CO (20-250 ms)
S6	120	min. time for release from CO (40-250 ms)
S7	24	min. time for DID pulse (12-40 ms)
S8	96	DID pulse tolerance (40-120 ms)
S9	16	min. time for DID pulse pause (12-40 ms)
S10	112	DID pulse pause tolerance (40-200 ms)
S11	60	AC ring detection of pause (12-250 ms)
S12	60	release 1 (20-250 ms)
S13	80	release 2 (20-250 ms)
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	for "transparent" call
		0	proceed answer with rng_off
		1	proceed answer with rng_on
P2	0	on release
		0	no signal to CO
		1	signal to CO
P3	0	ringing AC
		0	25/ 50 Hz
		1	16 2/3 Hz
P4	0	hardware
		0	with COFI
		1	with SICOFI
P5	0	on release
		0	backward
		1-2	reserve
P6	4	end-of-dial signal to CO
		0	after message from DH
		1-6	independent after 1-6 digits
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	10000	supervision of subsequent ringing (1000-30000 ms)
L2	500	forced pause betw. ringing or busy tone to CO (100-12000 ms)
L3	240	ground pulse to CO (24-3000 ms)
L4	120	flash to CO (24-2000 ms)
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	140	ringing AC detection 25/50 Hz (80-250 ms)	only if P3=0
S2	200	ringing AC detection 16 2/3 Hz (80-250 ms)	only if P3=1
S3	144	S1+ 4 (80-250 ms)
S4	204	S2 + 4 (80-250 ms)
S5	40	noise pulse inhibit for seizure by CO (20-250 ms)
S6	120	noise pulse inhibit for release by CO (40-250 ms)
S7	24	min. DID pulse (12-40 ms)
S8	96	DID pulse tolerance (40-120 ms)
S9	16	min. DID pulse pause (12-40 ms)
S10	112	DID pulse pause tolerance (40-200 ms)
S11	60	AC ring detection of pause (12-250 ms)
S12	60	release 1 (20-250 ms)
S13	80	release 2 (20-250 ms)
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	for "transparent" call
		0	proceed answer with RNG_OFF
		1	proceed answer with RNG_ON
P2	0	on release
		0	no signal to CO
		1	signal to CO
P3	0	AC ring
		0	25/ 50 Hz
		1	16 2/3 Hz
P4	0	hardware
		0	with COFI
		1	with SICOFI
P5	0	on release
		0	backward
		1-2	reserve
P6	4	end-of-dial signal to CO
		0	after message from DH
		1-6	independet after 1-6 digits
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	200	PBX release time (40-1000 ms)
L2	200	CO release time minimum (50-1000 ms)
L3	10000	supervision of subsequent ringing (1000-15000 ms)
L4	150	min. time release acknowledgement from CO after release from PBX (50-1000 ms)
L5	4	dial tone transmission delay (4-2500 ms)
L6	5000	splash ring after early guard (1000-15000 ms)
L7	10000	remote blocking after CO do not release (1000-30000 ms)

Shorttimer	Default (ms)	Description	Remark
S1	100	signal key duration (50-250 ms)
S2	70	min. time for charge pulse (16-250 ms)
S3	90	minimum charge pulse pause (16-250 ms)
S4	250	min. ringing time (20-250 ms)
S5	0	answer supervision time outgoing (in seconds) (1-250 s)
S6	0	release supervision time (in seconds) (1-250 s)
S7	4	delay for through-connection of speech path (4-250 ms)
S8	40	min. time for reversal of polarity at CO (20-200 ms)
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	for incoming seizure
		0	without loop monitoring and early guard
		1	with early guard and ringing current
P2	0	call charge recording
		0	without
		1	charge with 50 Hz/12 Hz/16 Hz
		2	silent reversal
P3	0	if used as a station line ( BW only)
		0	grounding of one wire
		1	grounding of both wires
P4	0	function
		0	with loop supervision
		1	without loop supervision
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	if CO do not release
		0	line alarm
		1	no line alarm
P14	0	release by CO
		0	process
		1	ignore

Longtimer	Default (ms)	Description	Remark
L1	100	signal key duration (50-1000 ms)
L2	600	CO release time minimum (50-1000 ms)
L3	10000	supervision of subsequent ringing (1000-15000 ms)
L4	150	min. time release acknowledgement from CO after release from PBX (50-1000 ms)
L5	150	difference between min. and max. charge pulse time (20-1000 ms)
L6	5000	splash ring after early guard (1000-15000 ms)
L7	10000	remote blocking after CO do not release (1000-30000 ms)

Shorttimer	Default (ms)	Description	Remark
S1	200	PBX release time (40-250 ms)
S2	70	min. time for charge pulse (50-250 ms)
S3	90	minimum charge pulse pause (16-250 ms)
S4	90	answer supervision time outgoing (in seconds) (1-250 s)
S5	90	release supervision time (in seconds) (1-250 ms)
S6	0	reserve
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	1	for incoming seizure
		0	without loop monitoring and early guard
		1	with early guard and ringing current
P2	0	call charge recording
		0	without
		1	with 50 Hz
P3	0	if used as a station line (BW only)
		0	grounding of one wire
		1	grounding of both wires
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	1000	forward release (300-4000 ms)
L2	1000	backward release (200-4000 ms)
L3	6500	remote blocking begin (400-10000 ms)
L4	1000	remote blocking end (200-4000 ms)
L5	4300	evaluation range for release signals (200-8000 ms)
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	100	max. time for recognition of seizure pulse type2 (40-252 ms)
S2	100	max. time for recognition of seizure pulse type1 (40-240 ms)
S3	100	max. time for recognition of dial pulses (40-240 ms)
S4	100	min. time for end-of-digit detection (40-240 ms)
S5	140	sending time seizure, seizure type tie2 (60-252 ms)
S6	60	sending time seizure, seizure type tie1 (24-200 ms)
S7	60	sending time seizure, seizure type not specified (24-200 ms)
S8	60	sending time seizure acknowledgement (24-200 ms)
S9	60	sending time start-of-dial signal (24-200 ms)
S10	60	sending time end-of-dial (24-200 ms)
S11	60	sending time answer (24-200 ms)
S12	200	min. interval between signals to be sent (40-252 ms)
S13	0	Glaretime (should: 40 ms)	only TMEMW LWVAR=5/6/8
S14	0	Time between receive seizure and send seizure acknowledgement	only TMEMW LWVAR=5/6/8
		0-6 send seizure acknowledgement controlled by DH
		8-255 Time between seizure and send seizure acknowledge (plus LW-delay from 25 ms)	If S14<>0, than DH-Timer: cha-dtim1:typedh=tie,reset4=20;

Parameter	Default	Description		Remark
P1	0	0	Standard TF-signaling	only TMEMW LWVAR=5/6/8
		1	BOT signaling
P2	0	reserve
P3	0	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	600	time between end-of-dial and answer (100-1200 ms)
L2	200	pause between answer and through-connection of speech path, if ringing at time of answer (100-3000 ms)
L3	600	time between answer and release (100-1000 ms)
L4	200	noise pulse inhibit for long distance exchange rering (40-800 ms)
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	52	min. time for incoming seizure (20-250 ms)
S2	12	min. time for DID pulse (12-40 ms)
S3	112	DID pulse tolerance (40-120 ms)
S4	16	min. time for DID pulse pause (12-40 ms)
S5	90	DID pulse pause tolerance (40-200 ms)
S6	50	min. time for release from CO (40-250 ms)
S7	40	min. time of ring current reception (8-100 ms)
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	end-of dial signal to CO
		0	after message from DH
		1-6	independent after 1-6 digits
P2	0	through-connection
		0	immediately with answer -also when ringing tone is applied
		1	delayed by long_time L2 after answer
P3	0	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	352	PBX release time (40-1000 ms)
L2	600	CO release time minimum (50-1000 ms)
L3	10000	supervision of subsequent ringing (1000-15000 ms)
L4	150	min. time release acknowledgement from CO after release from PBX (50-1000 ms)
L5	4	dial tone transmission delay (4-3000 ms)
L6	5000	splash ring after early guard (1000-15000 ms)
L7	10000	remote blocking after CO do not release (1000-30000 ms)

Shorttimer	Default (ms)	Description	Remark
S1	100	signal key duration (50-250)
S2	70	min. time for charge pulse (16-250 ms)
S3	90	minimum charge pulse pause (16-250 ms)
S4	250	min. ringing time (20-250 ms)
S5	0	answer supervision time outgoing (in seconds) (1-250 s)
S6	0	release supervision time (in seconds) (1-250 s)
S7	4	delay for through-connection of speech path (4-250 ms)
S8	40	min. time for reversal of polarity (20-200 ms)
S9	180	switch over time for high impedance monitoring ( in seconds) (60-250 s)
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	for incoming seizure
		0	without loop monitoring and early guard
		1	with early guard and ringing current
P2	0	call charge recording
		0	without
		1	with 50 Hz
P3	0	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	if CO do not release
		0	line alarm
		1	no line alarm
P14	0	release from CO
		0	process
		1	ignore

Longtimer	Default (ms)	Description	Remark
L1	352	PBX release time (40-1000 ms)
L2	200	CO release time minimum (50-1000 ms)
L3	10000	supervision of subsequent ringing (1000-15000 ms)
L4	150	min. time release acknowledgement from CO after release from PBX (50-1000 ms)
L5	4	delayed start-of-dial (4-3000 ms)
L6	5000	splash ring after early guard (1000-15000 ms)
L7	10000	remote blocking after CO do not release (1000-30000 ms)

Shorttimer	Default (ms)	Description	Remark
S1	100	signal key duration (50-250)
S2	70	min. time for charge pulse (16-250 ms)
S3	90	minimum charge pulse pause (16-250 ms)
S4	250	min. ringing time (20-250 ms)
S5	0	answer supervision time outgoing (in seconds) (1-250 s)
S6	0	release supervision time (in seconds) (1-250 s)
S7	4	delay for through-connection of speech path (4-250 ms)
S8	40	min. time for reversal of polarity (20-200 ms)
S9	180	switchover time for high impedence monotoring ( in seconds) (60-250 s)
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	for incoming seizure
		0	with ring current
		1	with early guard
P2	0	call charge recording
		0	without
		1	50 Hz
P3	0	if used as a station line (BW only)
		0	grounding of one wire
		1	grounding of both wires
P4	0	function
		0	normal
		1	without loop supervision
P5	0	0	for HW Q2288-X240-1..4	narrowband filter
		1	for HW Q2288-X240-5...	wideband filter
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	if CO do not release
		0	line alarm
		1	no line alarm
P14	0	release from CO
		0	process
		1	ignore

Longtimer	Default (ms)	Description	Remark
L1	352	PBX release time (40-1000 ms)
L2	200	CO release time minimum (50-1000 ms)
L3	10000	supervision of subsequent ringing (1000-15000 ms)
L4	150	min. time release acknowledgement from CO after release from PBX (50-1000 ms)
L5	4	dial tone transmission delay (4-3000 ms)
L6	5000	splash ring after early guard (1000-15000 ms)
L7	10000	remote blocking after CO do not release (1000-30000 ms)

Shorttimer	Default (ms)	Description	Remark
S1	100	signal key duration (50-250)
S2	70	min. time for charge pulse (16-250 ms)
S3	90	minimum charge pulse pause (16-250 ms)
S4	250	min. ringing time (20-250 ms)
S5	0	answer supervision time outgoing (in seconds) (1-250 s)
S6	0	release supervision time (in seconds) (1-250 s)
S7	4	delay for through-conn. of speech path (4-250 ms)
S8	40	min. time for reversal of polarity (20-200 ms)
S9	180	switchover time for high impedence monotoring ( in seconds) (60-250 s)
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	for incoming seizure
		0	with ring current
		1	with early guard
P2	0	call charge recording
		0	without
		1	16 Hz
P3	0	if used as a station line (BW only)
		0	grounding of one wire
		1	grounding of both wires
P4	0	function
		0	normal
		1	without loop supervision
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	release from CO
		0	process
		1	ignore

Longtimer	Default (ms)	Description	Remark
L1	150	min. ringing time ( ringing noise suppression ) (280-1000 ms)
L2	250	gap supervision time (50-600 ms)
L3	3900	supervision of subsequent ringing (1500-15000 ms)
L4	210	min. time for reversal of polarity (100-1000 ms)
L5	10000	remote blocking (1000-30000 ms)
L6	160	delay for through-connection of speech path (50-800 ms)
L7	408	max. charge pulse (30-1000 ms)

Shorttimer	Default (ms)	Description	Remark
S1	100	signal key duration (20-350 ms)
S2	50	min. time for charge pulse (28-250 ms)
S3	30	minimum charge pulse pause (8-250 ms)
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	operation as
		0	trunk circuit
		1	tie circuit without loop supervision
		2	HKZ with loop supervision
		3	trunk circuit with reversal
P2	0	ring tripping
		0	not delayed
		1	delayed
		2	loop and voice switching only in call pause
P3	0	grounding
		0	b wire
		1	both wires
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	1	call charge release: registration of pulses after release
		A)	error advisory message + trunk blocking:
		0	no further call charge recording
		1	max. 1 charge pulse during 2 seconds
		2	all charge pulses during 2 seconds
		B)	only error advisory message, no trunk blocking:
		3	no further call charge recording
		4	max. 1 charge pulse during 2 seconds
		5	all charge pulses during 2 seconds
		C)	no error advisory message, only trunk blocking:
		6	no further call charge recording
		7	max. 1 charge pulse during 2 seconds
		8	all charge pulses during 2 seconds
		D)	nor error advisory message nor trunk blocking:
		9	no further call charge recording
		10	max. 1 charge pulse during 2 seconds
		11	all charge pulses during 2 seconds
		12	all charge pulses during seizure lookout
P13	0	reserve
P14	0	release from CO
		0	process
		1	ignore
		2	line alarm

Longtimer	Default (ms)	Description	Remark
L1	0	reserve
L2	0	reseizure guard time after outgoing call 200 ms - 5 s (standard: 2s)	only for HKZ-Hungary in DIUC64 LWVAR=F
L3	0	reseizure guard time after incoming call 200 ms - 5 s (standard: 2s)	only for HKZ-Hungary in DIUC64 LWVAR=F
L4	0	recognition time : release from CO after release from PABX 10 ms - 5 s (standard: 100 ms)	only for HKZ-Hungary in DIUC64 LWVAR=F
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	0	reserve
S2	0	reserve
S3	0	reserve
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	reserve
P2	0	reserve
P3	0	seizure direction		only for HKZ-Hungary in DIUC64 LWVAR=F
		0	bothway directed
		1	outgoing directed
		2	incoming directed
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	0	reserve
L2	0	reserve
L3	0	reserve
L4	0	reserve
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	0	reserve
S2	0	reserve
S3	0	reserve
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	reserve
P2	0	reserve
P3	0	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve