154.6.5 Appendix 2, Part 5: Initblocks 81 till 100

Longtimer	Default (ms)	Description	Remark
L1	40	seizure acknowledge simulation time - outgoing (4-30000 ms)
L2	30000	release guard supervision time- outgoing (1000-30000 ms)
L3	10000	min. length of a qualified alarm (1000-30000 ms)
L4	0	reserve
L5	70	min. length of ANI-request as a qualified answer - outgoing (10-30000ms)
L6	1000	speech channel through connection delay time (outgoing + P11 = 0 and incoming) (4-30000)
L7	1300	min. length of a qualified ANI-removal - outgoing (1000-30000 ms)	only for outgoing and P11 = 1 or 2

Shorttimer	Default (ms)	Description	Remark
S1	20	min. length of a qualified seizure (incoming) (10-255 ms)
S2	70	min.length of a qualified clear forward (incoming) (10-255 ms)
S3	20	min. length of a qualified release guard (outgoing) (10-255 ms)
S4	180	min. length of a qualified release forward (incoming) (10-255 ms)
S5	180	min. length of a qualified clear backward (outgoing) (10-255 ms)
S6	0	Gain level transmit / receive
		0 - 3.5 dB / - 3.5 dB
		1 - 4.0 dB / - 3.0 dB
		2 - 4.5 dB / - 2.5 dB
		3 - 5.0 dB / - 2.0 dB
		4 - 5.5 dB / - 1.5 dB
		5 - 6.0 dB / -1.0 dB
		6 - 6.5 dB / -0.5 dB
		7 - 7.0 dB / 0.0 dB
S7	0	line signals for
		0 LONIIS
		1 ADASE-P
S8	0	transmission of answer - incoming
		0 continuous signal
		1 pulsed signal (for testing purposes of ADASE-P)
S9	1	SICOFI Version
		0 SICOFI Version<>2.3
		1 SICOFI Version=2.3 (SICOFI-power always on)
S10	0	transmission of clearback - incoming
		0 continuous signal
		1 pulsed signal (for testing purposes of ADASE-P)
S11	0	transmission of dispatcher forced clear - incoming
		0 no
		1 yes (for testing purposes of ADASE-P)
S12	0	B-subscriber busy - incoming
		0 transmission of clearback
		1 busy tone (ADASE-P)
S13	0	transmission of blocking signal after forward release - incoming
		0 yes
		1 no (for testing purposes of ADASE-P)
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	dialing type (incoming)
		0	pulse dialing
		1	DTMF
		2	MF dialing
P2	1	blocking time - 1 sec unit (outgoing) 1-255
P3	0	digit received
		0	through a- and b-wire
		1	through a-wire
		2	through b-wire
P4	0	false signal handling (L3)
		0	no action (outgoing and incoming)
		1	system alarm with line testing (outgoing)
		2	system alarm without line testing (outgoing and incoming )
P5	1	outgoing guard time - 1 sec. unit (outgoing) 1 - 255
P6	0	dial tone detection (outgoing)
		0	no detection
		1	dial tone has to be detected
P7	20	answer supervision (outgoing)
		0	no supervision
		1-255	with supervision ( 30 sec. unit )
P8	0	Malicious Call Identification after clear forward transmission (outgoing)
		0	no MCID
		1-255	with MCID ( 30 sec. unit )
P9	20	delay time release forward transmission (outgoing)
		0	no delay
		1-255	with delay ( 30 sec. unit )
P10	0	clear forward receiving handling (incoming)
		0	send clear back line signal and release message to the system software
		1	send "A On-hook" message to the system software
P11	3	ANI-request (outgoing)
		0	ANI-request handling type 1 ( after detection the ANI-request signal the trunk LW doesn‘t activate ANI-request process in the system software)
		1	ANI-request handling type 2 ( inform the system software after detection the ANI-request signal in talk state by the trunk loadware)
		2	ANI-request handling type 3 ( inform the system software after detection the answer removal signal by the trunk loadware)
		3	No ANI-request
P12	0	manual busy override (incoming)
		0	no busy override
		1	busy override
P13	2	release guard missing handling (outgoing)
		0	no action
		1	system alarm with line testing
		2	system alarm without line testing
P14	0	release-variant (outgoing)
		0	output signal: release forward
		1	output signal: clear forward

Longtimer	Default (ms)	Description	Remark
L1	0	reserve
L2	0	reserve
L3	10000	min. length of a qualified alarm (1000-30000ms)
L4	0	reserve
L5	0	reserve
L6	100	speech channel through connection delay time - incoming (4-30000)
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	20	min. length of a qualified seizure (incoming) (10-255 ms)
S2	0	reserve
S3	0	reserve
S4	180	min. length of a qualified release forward (incoming) (10-255)
S5	0	reserve
S6	0	Gain level transmit / receive
		0 - 3.5 dB / - 3.5 dB
		1 - 4.0 dB / - 3.0 dB
		2 - 4.5 dB / - 2.5 dB
		3 - 5.0 dB / - 2.0 dB
		4 - 5.5 dB / - 1.5 dB
		5 - 6.0 dB / -1.0 dB
		6 - 6.5 dB / -0.5 dB
		7 - 7.0 dB / 0.0 dB
S7	0	reserve
S8	0	reserve
S9	1	SICOFI Version
		0 SICOFI Version<>2.3
		1 SICOFI Version=2.3 (SICOFI-power always on)
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	dialing type (incoming)
		0	pulse dialing
		1	DTMF
		2	MF dialing
P2	0	reserve
P3	0	digit received
		0	through a- and b-wire
		1	through a-wire
		2	through b-wire
P4	0	false signal handling (L3)
		0	no action (outgoing and incoming)
		1	system alarm with line testing (outgoing)
		2	system alarm without line testing (outgoing and incoming )
P5	1	rering after B on-hook for manual busy override (P12=1)
		0	no reaction to rering signal
		1	start of ringing B-subscriber after rering signal (without reaction to rering removal signal)
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	manual busy override (incoming)
		0	no busy override
		1	busy override
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	2800	answer recognition time (outgoing) (10-30000 ms)	if P11=3: L1=70 ms.
L2	20000	release supervision time (outgoing) (1000-30000 ms)
L3	5000	alarm recognition time (outgoing/incoming) (1000-30000 ms)
L4	5000	blocking recognition time (outgoing) (1000-30000 ms)
L5	500	outgoing guard timer (outgoing) (10-30000ms)
L6	1000	delayed through connection of speech channel (only if P11 =0 ) (outgoing/incoming in any case) (1000-30000 ms)	P11=0 :
L7	1300	ANI-removal recognition time only if P11=1 or 2 (outgoing) (1000-30000 ms)	P11=1 or 2 :

Shorttimer	Default (ms)	Description	Remark
S1	0	reserve
S2	0	reserve
S3	0	reserve
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	5	glare time (outgoing, bidirectional: not requested); multiples of 50 ms (1-10 )
S9	0	half-way through connection of speech channel (incoming)
		0 no half-way
		1 half-way through connection	(only if P1=0)
S10	0	half-way through connection of speech channel (outgoing)
		0 no half-way
		1 half-way through connection	(only if P1=0)
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	dialing type (incoming)
		0	pulse dialing
		2	MF dialing
P2	0	reserve
P3	1	direction of seizure
		0	bidirectional (not requested)
		1	outgoing
		2	incoming
P4	0	reserve
P5	0	reserve
P6	0	supervision of dial tone (outgoing)
		0	no supervision
		1	supervision
P7	20	supervision of answer (outgoing)
		0	no supervision
		1-120	multiples of 30 sec.
P8	0	change of speech level attenuation (outgoing/incoming)
		0	no change
		1	change possible
P9	0	reserve
P10	0	reaction to AUSLOESEN from DH before answer (recovery release) (incoming)
		0	only busy tone
		1	send clear back signal
P11	3	ANI-request signal activates ANi-codogram transmission (outgoing)
		0	no ANI-request, signal ANI-request is valid but will be ignored from LW
		1	ANI-request signal is valid and will be processed type1: in talk state: send ANI-request message to DH after reception of ANI-request from line
		2	ANI-request signal is valid and will be processed type2: in talk state: send ANI-request message to DH after reception of answer removal from line
		3	line without ANI-request, signal ANI-request is not possible and will be processed like answer (L1=70 ms)
P12	0	reserve
P13	0	line testing (outgoing)
		0	no line testing
		1	line testing
P14	0	seizure pulse (outgoing/incoming)
		0	normal seizure pulse
		1	short seizure pulse

Longtimer	Default (ms)	Description	Remark
L1	0	reserve
L2	20000	release supervision time (outgoing) (1000-30000 ms)
L3	5000	alarm recognition time (outgoing/incoming) (1000-30000 ms)
L4	5000	blocking recognition time (outgoing) (1000-30000 ms)
L5	500	outgoing guard timer (outgoing) (10-30000ms)
L6	100	delayed through connection of speech channel (incoming) (4-30000 ms)
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	0	reserve
S2	0	reserve
S3	0	reserve
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	5	glare time for outgoing seizure (outgoing) 1-10 multiples of 50 ms	only for P3=0 and 2
S9	0	half-way through connection of speech channel (incoming)
		0 no half-way
		1 half-way through connection	(only if P1=0)
S10	0	half-way through connection of speech channel (outgoing)
		0 no half-way
		1 half-way through connection	(only if P1=0)
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	type of dialing (incoming)
		0	pulse dialing
		2	MF dialing
P2	0	reaction to B-busy from line (outgoing)
		0	release
		1	end of dial (B-busy) message send to DH
		2	ignore (no message to DH)
P3	1	direction of seizure
		0	bidirectional (not requested)
		1	outgoing
		2	incoming
P4	0	transmit ring request after B-free (outgoing)
		0	no ring request
		1	ring request
P5	20	end of dial supervision (outgoing)
		0	no supervision
		1-120	multiples of 30 s.
P6	0	dial tone supervision (outgoing)
		0	no supervision
		1	supervision
P7	6	answer supervision (outgoing)
		0	no supervision
		1-120	multiples of 30 sec.
P8	0	change of speech level attenuation (outgoing/incoming)
		0	no change
		1	change possible
P9	20	reanswer or disconnect supervision time upon clearback (calling party release control/outgoing)
		0	no supervision
		1-120	multiples of 30 s.
P10	0	reserve
P11	0	reserve
P12	1	busy override (incoming)		only for P1=0 : pulse dialing
		0	no busy override
		1	with busy override caused by LW	controled by fixed timer
P13	1	line testing (outgoing)
		0	no line testing
		1	line testing
P14	0	seizure pulse (outgoing/incoming)
		0	normal seizure pulse
		1	short seizure pulse

Longtimer	Default (ms)	Description	Remark
L1	600	transmission time of long signals (release, release acknowledgement) (200-1000 ms)
L2	200	min. pause between recognition of a signal and transmission of a signal resp. min. pause for transmission of two consecutive signals (150-400 ms)
L3	200	min. recognition time for long signals resp. max. recognition time for short signals resp. max. recognition time for make (dial) (100-400 ms)
L4	2000	min. recognition time for blocking resp. max. recognition time for long signals (800- 4000 ms)	long signals : release, release acknowledge
L5	0	reserve
L6	500	seizure acknowledge ignore window (if P2=1) (100-1000 ms)
L7	10000	release acknowledge supervision (if P5=1 and/or P12=1) resp. seizure acknowledge supervision (if P2=2) (2000-20000 ms)

Shorttimer	Default (ms)	Description	Remark
S1	100	short signal sending time (seizure, seizure acknowledgement, answer) ( 40-120 ms)
S2	35	minimum recognition time for short signals (32- 50 ms)	short signals: seizure, seizure acknowledge, answer, make for dialing
S3	100	minimum interdigit time (incoming trafic) resp. maximum break time (incoming traffic) ( 80-150 ms)
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	1	1st digit supervision (incoming traffic) 0 no 1st digit supervision 1-255 1st digit supervision time: (n * 30s)
S8	3	glare seizure supervision (n * 50 ms) (1-10 )
S9	1	speech path through connection before answer (incoming traffic)
		0 bothway
		1 one way through connection
S10	1	speech path through connection before answer (outgoing traffic)
		0 bothway
		1 one way through connection
S11	4	guard time against outgoing seizure (after an outgoing seizure) 1-40 guard time (n * 250 ms)
S12	2	guard time against outgoing seizure (after an incoming seizure) 1-40 guard time (n * 250 ms)
S13	0	signal recognition during transmission
		0 possible
		1 deactivated
S14	1	Incoming seizure acceptance during guard time against outgoing seizure (S11 or S12)
		0 no
		1 yes

Parameter	Default	Description		Remark
P1	0	transmission of seizure acknowledge (incoming traffic)
		0	no
		1	yes
P2	1	seizure acknowledge supervision (outgoing traffic)
		0	no
		1	seizure acknowledge possible but will be ignored (L6)
		2	yes (L7)
P3	1	transmission of backward release (incoming traffic)
		0	no
		1	yes
P4	1	forward release acknowledge transmission (incoming traffic)
		0	no
		1	yes
P5	0	backward release acknowledge supervision (incoming traffic)
		0	no
		1	yes (L7)
P6	0	dial tone supervision (outgoing traffic)
		0	without dial tone supervision
		1	with dial tone supervision
P7	4	answer supervision (outgoing traffic)
		0	no answer supervision
		1-255	supervision time (n * 30s)
P8	0	change of speech level attenuation (outgoing/incoming)
		0	no change of level
		1	with change of level
P9	0	out of service / blocking signaling (incoming/outgoing)
		0	no signal
		1	sending continuous signal (only for testing purposes)
P10	0	transmit level control (outgoing/incoming)		sum tone level (600/750 Hz)
		0	- 6.5 dBm0
		1	- 9.0 dBm0
P11	1	backward release acknowledge transmission (outgoing traffic)
		0	no
		1	yes
P12	0	forward release acknowledge supervision (outgoing traffic)
		0	no
		1	yes (L7)
P13	0	maximum speaking time in talk state ( incoming and outgoing traffic)
		0	no limit
		1-255	maximum speaking time: (n * 30s)
P14	0	test procedure (if seizure acknowledge or release acknowledge fails to come)
		0	no test procedure
		1-255	with test procedure: time between release and seizure: (n * 30 s)

Longtimer	Default (ms)	Description	Remark
	120	glare time (10-30000 ms)
L2	1000	outgoing guard timer (outgoing) (10-30000 ms)
L3	500	outgoing guard timer (incoming) (10-30000 ms)
L4	1650	blocking recognition time (1000-30000 ms)
L5	0	reserve
L6	1000	delayed through connection of speech channel (1000-30000 ms)
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	0	reserve
S2	0	reserve
S3	0	reserve
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	2	type of VF signaling (outgoing/incoming)
		0	1600 Hz
		1	2100 Hz
		2	2600 Hz
P2	0	supervision of dial tone (outgoing)
		0	no supervision
		1	supervision
P3	20	supervison of answer (outgoing)
		0	no supervision
		1-120	multiples of 30 sec
P4	0	half-way through connection of speech channel (outgoing)
		0	no half-way
		1	half-way through connection
P5	0	half-way through connection of speech channel (incoming)
		0	no half-way
		1	half-way through connection
P6	0	reaction to deactivation of circuit (outgoing/incoming)
		0	no reaction
		1	send continuous line signal until start up
P7	0	receive split adjustment
		0	short: for dial pusles
		1	short: for seizure , answer , dial pulses
P8	0	change of speech level attenuation (outgoing/incoming)
		0	no change
		1	change possible
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	200	flash or ground signal transmission time (60- 500 ms)
L2	10000	periodical ringing supervision for release recognition from PSTN before answer (incoming traffic) (4000-15000 ms)
L3	100	minimum time for release recognition from PSTN (feeding interruption) (see P01-high and P02-high) (20- 200 ms)
L4	400	delay for speech path through-connection after answer; minimum time for answer; delay for line supervision activation after answer (incoming traffic) (100- 2000 ms)
L5	400	maximum time for charge pulse (300-600 ms)	only if P4_LOW=7 or 8
L6	120	minimum time of ring rcognition (100- 500 ms)
L7	5000	idle supervision time (see P04-high) (500-30000 ms)	In spain used also for chargerecognition while guard time after a call

Shorttimer	Default (ms)	Description	Remark
S1	40	minimum time for charge pulse (40- 200 ms)
S2	90	minimum time for charge pause (40- 200 ms)
S3	0	listener-/controlchannel
		0 listener-channel
		1 control-channel
S4	0	line signaling
		0 with HKZ-line signaling
		1 without line signaling, without loop
		2 without line signaling, with loop
S5	0	dialing with V_ON 0 normal dialing with V_ON 1 dialing with V_OFF for France
S6	0	delayed activation of ring detection 0 without delay 1-10 delay (multiple of 500 ms) standard: 4
S7	10	minimum time for polarity reversal recognition maximal time for reversal charge recognition (multiple of 10 ms) (1- 200)
S8*	1	high: answer procedure for collect calls incomming traffic) (0- 2 )
		0 normal answer: loop (Brazil)
		1 answer with loop (1 sec.), loop interruption (S8- low), back to answer (loop) (protection against collect calls)
		2 if HICOM-party authorized: normal answer (loop) if HICOM-party unauthorized: answer with loop (1sec.), loop interruption (S8-low), back to answer (loop). (protection against collect calls is only for unauthorized users)
		low: loop interruptiion time for collect calls (incoming traffic) ( 0- 10)
		0 250 ms loop interruption
		1 - 10 loop interruption (multiple of 500 ms)
S9	0	reanswer supervision (outgoing traffic) (0- 255)
		0 no supervision
		1 - 255 reanswer supervision (in seconds) as long as the calling party remains off-hook, the called party has the possibility to hook on and off again. reanswer supervision can be activated only when P2-low = 2
S10	2	guard time after an outgoing call (in seconds) (1- 30)
S11	2	guard time after an incoming call (in seconds) (1- 30)
S12	0	conversation time limit ( 0- 255)
		0 no limit
		1 - 255 conversation time (multiple of 30 sec.) after the timer expired the conversation will be automatically disconnected.
S13	0	outgoing seizure start with very low resistance (0- 1)
		0 10 ms very low resistance
		1 350 ms very low resistance (Australia)
S14**	36	charge characteristic ( 12kHz / 16 kHz )
		Belgium, Bulgaria, Poland, South Africa ( 16 kHz Standard )
		S14 36
		P12 36
		Greece, Luxemburg, Norway ( 16 kHz )
		S14 36
		P12 70
		France, Portugal ( 12 kHz Standard )
		S14 50
		P12 55
		Hungary, Irland ( 12 kHz )
		S14 30
		P12 27
		Italy ( 12 kHz )
		S14 30
		P12 53
		Australia ( 12 kHz )
		S14 50
		P12 50
		Spain ( 12 kHz )
		S14 40
		P12 55
		Austria ( 12 kHz )
		S14 30
		P12 31

Parameter	Default	Description		Remark
P1*	16	high: feeding interruption from PSTN (incoming traffic)
		0	ignore
		1	forward release recognition (l3)
		low: polarity reversal from PSTN (incoming traffic)
		0	ignore
		1	forward release recognition (S3)
P2*	18	high: feeding interruption from PSTN (outgoing traffic)
		0	ignore
		1	backward release recognition (l3)
		low: polarity reversal from PSTN (outgoing traffic)
		0	ignore
		1	backward release recognition (S3)
		2	polarity reversal: answer back to normal feeding: backward release
P3*	0	high: answer loop (incoming traffic)
		0	loop is closed, independent from the ring status
		1	loop will be closed only during the ring pause	For France
		low: release recognition by feeding interruption from PSTN before answer (incoming traffic)
		0	no release recognition
		1	release recognition	For France
P4*	0	high: loop start and earth calling
		0	loop start without idle supervision
		1	loop start with idle supervision (L7). with loop disconnect during S10 or S11
		2	earth calling	For Great Britain. P8 must be 1 or 2
		3	loop start without idle supervision, time for charge recognition after loop disconnect (Hicom releases) L7 < S10	For Spain
		low: charge or answer pulse (outgoing traffic)
		0	no charge and no answer pulse
		1	50Hz charge pulse
		2	12kHz charge pulse
		3	16kHz charge pulse
		4	reversal charge pulse	Time between polarity reversal and back to normal feeding < S7
		5	12kHz answer pulse	Feature for Syria No charge with additional 12kHz pulses.
		6	wink answer (reversal answer pulse)	Feature for Thailand Time between polarity reversal and back to normal feeding < S37 No charge with additional reversal pulses.
		7	12 kHz charge pulse. after release, only one charge pulse will be accepted	Feature for France Charge pulses shorter than 60ms or longer than 400ms will not be accepted. Fault message.
		8	12 kHz charge pulse. after release, all charge pulses will be accepted.
		9	50 Hz charge pulse. after release, only one charge pulse will be accepted
		A	50 Hz charge pulse. after release, all charge pulses will be accepted.
P5	0	SICOFI-version
		0	version ≠ V2.3 (SICOFI -Power ON only in seizure - slot)
		1	version = V2.3 (SICOFI-Power always ON )
P6*	1	high: ground pulse to PSTN (l1)
		0	ground pulse on one wire (a or b)
		1	ground pulse on both wires (a and b)
		low: dial tone supervision (outgoing traffic)
		0	no supervision
		1	with supervison
P7	0	answer supervision (outgoing traffic). answer supervision can be activated only when P2-low = 2.
		0	no supervision
		1-255	answer supervision (in seconds)
P8	0	supervision of PSTN-release after HICOM released
		0	no suoervision
		1	with supervision of PSTN-release after HICOM released through loop disconnect for 600 ms. (disconnect clearing). (Great Britain). l3 must be greater than 600 ms.
		2	with supervision PSTN-release after HICOM released through connection of high resistance (guarded clearing). (Great Britain).
P9	0	charge simulation
		0	no charge simulation
		1-255	with charge simulation
P10*	2	high: Delayed activation of line supervision
		0	1 sec.
		1	30ms
		low: last look noise suppression (multiple of 4 ms) (0-8)
P11	32	ring level (v)
		0-255	ring level
P12	36	12kHz- / 16kHz charge level (multiple of 0.02V) 50Hz charge level (multiple of 1V)		Default: 16kHz ( See Short Timer S14 ) Set 30 Volt for 50 Hz
		0-255	charge level
P13*	17	high: high current treshold value; low resistance loop
		0	5MA
		1-5	multiple of 10MA
		low: low current treshold value; high resistance loop
		0	0,5MA
		1-5	multiple of 1MA
P14**	0	transmission parameter board and country dependent parameter (input / balance impedance)

Longtimer	Default (ms)	Description	Remark
L1	600	minimum time between end of dial and answer (100-1000 ms)
L2	600	minimum time between answer and backward release (100-1000 ms)
L3	0	reserve
L4	200	delay time for speech path through-connection after rering and reanswer (100-1000 ms)
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	50	minimum time for incoming seizure (20-250 ms)
S2	24	minimum length of dial pulse (8-32 ms)
S3	96	maximum length of dial pulse (32-120 ms)
S4	16	minimum length of dial pause (8-32 ms)
S5	114	digit complete (32-200 ms)
S6	120	release recognition from CO after dialing (40-250 ms)
S7	200	minimum time for ring (on/off) recognition (40-255 ms)
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	dialing method
		0	rotary dialing
		1	DTMF
		2	MFC-R2
P2	0	end of dial control
		0	send eod controlled by SWU
		1-6	send eod after n(1-6)-digits are received when P2>0, end of dial from system has priority
P3	0	reserve
P4	0	reserve
P5	0	SICOFI-Version
		0	Version ≠ V2.3
		1	Version = V2.3 (SICOFI-Power must be ON continuously)
P6	0	reserve
P7	0	reserve
P8	30	normal feeding supervision
		0	no supervision
		1-255	with supervision (in sec.) - after backward release - put into service
P9	0	the way of speech path through connection
		0	speech path through connection after rering and reanswer when ring is off
		1	speech path through connection after rering and reanswer with delay (l4)
P10*	2	last look noise suppression
		high: reserve
		low: last look noise suppression (multiply of 4ms) (0-8)
P11	32	ring level (v) 0 - 255
P12	0	reserve
P13*	17	high/low current treshold value 0 - 5
		0	P13-high: 5 MA (low resistance loop)
		1-5	P13-high: multiple of 10 MA
		0	P13-low: 0.5 MA (high resistance loop)
		1-5	P13-low: multiple of 0.1 MA
P14	0	impedance index 0 - 255
		Hardware-Variant: Q2159 - X110		Level (in dBr) : A→ D / D→ A
		0	Input Impedance: 600 Ohm Balance Impedance: 400+700 // 200nF	- 5 / - 2
		1	Input Impedance: 600 Ohm Balance Impedance: 400+700 // 200nF	- 6 / - 1
		2	Input Impedance: 600 Ohm Balance Impedance: 400+700 // 200nF	0 / - 7

Longtimer	Default (ms)	Description	Remark
L1	0	reserve
L2	600	minimum time between answer and backward release (100-1000 ms)
L3	0	reserve
L4	0	reserve
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	50	minimum time for incoming seizure (20-250 ms)
S2	24	minimum length of dial pulse (8-32 ms)
S3	96	maximum length of dial pulse (32-120 ms)
S4	16	minimum length of dial pause (8-32 ms)
S5	114	digit complete (32-200 ms)
S6	120	release recognition from PSTN after dialing (40-250 ms)
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	dialing method
		0	rotary dialing
		1	DTMF
		2	MFC-R2
P2	0	reserve
P3	0	reserve
P4	0	reserve
P5	0	SICOFI-Version
		0	Version ≠ V2.3
		1	Version = V2.3 (SICOFI-Power always ON)
P6	0	reserve
P7	0	reserve
P8	30	normal feeding supervision - after backward release - put into service
		0	no supervision
		1-255	with supervision (in sec.)
P9	0	reserve
P10*	5	last look noise suppression
		high: reserve
		low: last look noise suppression (multiply of 4ms) (0-8)
P11	32	ring level (V) 0 - 255
P12	0	reserve
P13*	17	high/low current treshold value 0 - 5
		0	P13-high: 5 MA (low resistance loop)
		1-5	P13-high: multiple of 10 MA
		0	P13-low: 0.5 MA (high resistance loop)
		1-5	P13-low: multiple of 0.1 MA
P14	0	impedance index 0 - 255
		Hardware-Variant: Q2159 - X100		Level (in dBr) : A→ D / D→A
		0	Input Impedance: 150+830 // 72 nF Balance Impedance: 150+830 // 72 nF	- 4 / - 3
		1	Input Impedance: 150+830 // 72 nF Balance Impedance: 150+830 // 72 nF	- 6 / - 1

Longtimer	Default (ms)	Description	Remark
L1	0	reserve
L2	0	reserve
L3	0	reserve
L4	0	reserve
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	0	reserve
S2	0	reserve
S3	0	reserve
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	reserve
P2	0	reserve
P3	0	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	0	reserve
L2	0	reserve
L3	0	reserve
L4	0	reserve
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	0	reserve
S2	0	reserve
S3	0	reserve
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	reserve
P2	0	reserve
P3	0	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	100	flash signal transmission time (50-120 ms)
L2	10000	wait for loop current after outgoing seizure (500-15000 ms)
L3	1000	charge receive deactive time by outgoing seizure (100-2000 ms)
L4	600	guard time against outgoing call (500-10000 ms)
L5	500	charge receive time after forward release (outgoing traffic) (200-1000 ms)
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	40	minimum time for incoming seizure (10-250 ms)
S2	16	minimum length of dial pulse (10-100 ms)
S3	100	digit complete (30-200 ms)
S4	40	minimum time for charge pulse (40-200 ms)
S5	40	minimum time for charge pause (40-200 ms)
S6	160	release recognition from PSTN after dialing (40-250 ms)
S7	60	end of dial pulse transmission time (40-100 ms)
S8	30	delay time against backward release (30-100 ms)
S9	100	loop time by put into service (80-200 ms)
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14*	30	charge characteristic (20-250 ms)
		Austria ( 12 kHz )
		S14 30
		P12 31

Parameter	Default	Description		Remark
P1	0	reserve
P2	0	reserve
P3	0	reserve
P4*	2	high	reserve
		low	metering
		0	no metering
		1	50Hz metering pulses
		2	12kHz metering pulses
		3	16kHz metering pulses
P5	0	SICOFI-Version
		0	Version ≠ V2.3
		1	Version = V2.3 (SICOFI-Power always ON)
P6	1	dial tone supervision
		0	without dial tone supervision
		1	with dial tone supervision
P7	0	reserve
P8	30	first digit supervision
		1-255	multiple of 1 second
P9	0	reserve
P10*	2	last look noise suppression
		high	reserve
		low	last look noise suppression ( multiple of 4ms )
P11	32	ring level (v) 0 - 255
P12**	31	12 kHz/16 kHz charge level 50 Hz charge level ( multiple of 1 V )
P13	17	high/low current treshold value 0 - 5
		0	P13-high: 5 MA
		1-5	P13-high: 10 MA unit
		0	P13-low: 0.5 MA
		1-5	P13-low: 0.1 MA unit
P14	0	impedance index 0 - 255
		Hardware-Variant: Q2159 - X120		Level (in dBr) : A→ D / D→ A
		0	Input Impedance: 220+820 // 115 nF Balance Impedance: 220+1200 // 150 nF	- 3 / - 4
		1	Input Impedance: 220+820 // 115 nF Balance Impedance: 220+1200 // 150 nF	- 9 / + 2
		2	Input Impedance: 220+820 // 115 nF Balance Impedance: 220+1200 // 150 nF	- 6 / - 1

Longtimer	Default (ms)	Description	Remark
L1	0	reserve
L2	0	reserve
L3	0	reserve
L4	0	reserve
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	0	reserve
S2	0	reserve
S3	0	reserve
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	reserve
P2	0	reserve
P3	0	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	2800	answer recognition time with ANI: 2800ms, without ANI: 70ms (P11=3) (100-30000ms)	(outgoing local)
L2	500	min. time between two signal transmissions (100-1000ms)	(incoming/outgoing , toll/local)
L3	0	reserve
L4	2000	max.. recognition time for release pulse, min. blocking / alarm recognition time (1000-5000ms)	(incoming/outgoing , toll/local)
L5	500	outgoing guard time (incoming/outgoing , toll/local) ) (100-5000ms)
L6	1000	delayed through connection of speech channel (1000-3000ms)	only if P11=0 (ANI-request line signal possible but will be ignored) (incoming / outgoing local)
L7	3000	delay for ANI-removal to DH (1000-30000ms)	only if P11=1 or 2 (outgoing local)

Shorttimer	Default (ms)	Description	Remark
S1	40	max. recognition time short pulses (S-pulses) and min. recognition time for long pulses (L-pulses) (28-60 ms)	(incoming/outgoing , toll/local)
S2	126	max. recognition time for L-pulses and min. recognition time for release pulses (R-pulses ) (100-150 ms)	(incoming/outgoing , toll/local)
S3	90	max. recognition time for make/break pulses (60-100 ms)	(incoming , toll/local)
S4	0	reserve
S5	40	glare time (40-150 ms)	(outgoing local)
S6	0	reserve
S7	0	reserve
S8	0	method of startup 0 no line signal for startup (incoming/outgoing , toll/local) 1 startup with seizure-disconnect line signal (outgoing/bothway) startup with disconnect line signal (incoming)	(incoming/outgoing , toll/local)
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	reserve
P2	0	type of remote exchange		(outgoing local)
		0	modern exchange type (with register)
		1	old exchange type (without register)
P3	7	direction of seizure		(incoming / outgoing, toll/local)
		0	outgoing directed, local or toll ascending traffic
		1	incoming directed, local or toll ascending traffic
		2*	outgoing directed, toll descending traffic
		3*	incoming directed, toll descending traffic
		4	incoming directed, toll descending traffic: with conversion toll->local protocol
		5*	combined, outgoing or incoming local traffic or outgoing toll ascending traffic or incoming toll descending traffic (glare priority: incoming traffic)
		6*	combined, outgoing or incoming local traffic or incoming ascending toll traffic or outgoing descending toll traffic (glare priority: outgoing traffic)
		7	combined, outgoing or incoming local traffic or outgoing toll ascending traffic or incoming toll descending traffic with conversion toll->local protocol (seizure priority: incoming traffic)
		8	combined, outgoing or incoming local traffic or outgoing toll ascending traffic or incoming toll ascending traffic or outgoing descending traffic (seizure priority: outgoing traffic)
P4*	0	ring/ rering transmission after B-free		(outgoing toll)
P5	3	simulation of B-free		(incoming toll)
		0	no simulation
		1-20	simulation of B-free after time in multiples of 10s
P6	0	supervision of dial tone		(outgoing local)
		0	no supervision
		1	supervision
P7	20	supervision of answer		(outgoing local)
		0	no supervision
		1-120	supervision time in multiples of 30s
P8	0	reaction to AUSLOESEN / WE_BESETZT from DH before answer		(incoming toll / local)
		0	only busy tone
		1	send backward release signal
P9*	0	DH changes for Rural toll traffic
P10	1	blocking transmission		(incoming + bothway)
		0	no blocking transmission
		1	blocking transmission
P11	3	ANI-request signal activates codogram transmission		(outgoing local)
		0	ANI-request/-removal signal will be ignored by LW
		1	ANI-START to DH with ANI-removal recognition (after answer)
		2	ANI-START to DH with new ANI-request recognition (after answer)
		3	no ANI-request/-removal line signal, line signal is answer (L1=70ms)
P12*	0	ring-request evaluation before answer		(incoming toll)
P13	0	rering-request evaluation after clearback		(incoming desc. toll)
		0	line signal ignored
		1	simulated rering (reseizure + digits)
P14*	0	reset-request evaluation after B-busy local		(incoming toll)

Longtimer	Default (ms)	Description	Remark
L1	0	reserve
L2	0	reserve
L3	0	reserve
L4	0	reserve
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	0	reserve
S2	0	reserve
S3	0	reserve
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	reserve
P2	0	reserve
P3	0	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	0	reserve
L2	0	reserve
L3	0	reserve
L4	0	reserve
L5	0	reserve
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description	Remark
S1	0	reserve
S2	0	reserve
S3	0	reserve
S4	0	reserve
S5	0	reserve
S6	0	reserve
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	0	reserve
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1	0	reserve
P2	0	reserve
P3	0	reserve
P4	0	reserve
P5	0	reserve
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	reserve

Longtimer	Default (ms)	Description	Remark
L1	1000	sending time for release forward pulse (200-4000)
L2	1000	sending time for clear back pulse (200-4000)
L3	6500	sending time for blocking begin pulse (400-10000)
L4	360	sending time for blocking end pulse (200-4000)
L5	4300	maximum time for recognition of clear back or blocking end pulse (200-8000ms)
L6	500	time of ignore line signal after release from system by put into service
L7	0	reserve

Shorttimers	Default (ms)	Description	Remark
S1	100	recognition time for directional seizure (S2+S1), (40-252ms)
S2	100	recognition time for normal seizure, seizure acknowledge, start of dial, end of dial, answer (40-240ms)
S3	100	max. time of recognition for dial pulse (40-240ms)
S4	100	recognition time for end of dial (40-240ms)
S5	140	sending time for directional seizure pulse (60-252ms)
S6	60	sending time for normal seizure pulse (24-200ms)
S7	60	sending time for test seizure pulse (24-240ms)
S8	60	sending time for seizure acknowledge pulse (24-200)
S9	60	sending time for start of dial pulse (24-200ms)
S10	60	sending time for end of dial pulse (24-200ms)
S11	60	sending time for answer pulse (24-200ms)
S12	200	min. distance between 2 sending signals (40-252ms)
S13	40	time for glare seizure (12-100ms)
S14	0	reserve

Parameter	Default	Description		Remark
P1-high*	0	2 / 4 wire voice		only 4 wire voice implemented
		0	4 wire voice
		1	2 wire voice (fork)
P1-low*	0	E&M - type
		0	type IA (V)
		1	DC5
		2	type I
		3	type II
		4	HL / LL with type I	HL: high level supervion
		5	HL / LL with type IA (V)	LL: low level supervision
P2	0	Impedance-Index
			level A->D [dB] level D->A [dB] A / μ-law
		0	-3,5 -3,5 A	4 wire standard level C13
		1	-1,5 -1,5 A	Australia old
		2	+0,5 -4,5 A	GBR
		3	0 -6 μ	USA
		4	-4,5 -2,5 A	GUS
		5	-2,5 -4,5 A	BRD
		6	0 0 A	Australia new
		7	-7,0 0 A	standard level for 4-2 wire-converter with (-3,5/-3,5)
		8	0 -8,5 A	ITL railway + EVU
		9	+7 -16,0 A	Korea, Japan
		10	+4,3 -13,0 A	BRD, GUS, UNG C11-FDM
		11	+3,3 -12,0 A	GUS C11
P3-high*	0	low level-controling (TP- low level)		only if P1-low = 4 or 5, only the alarm measuring is used (optional)
		0	only line supervision	TP on ground = no alarm
		1	line supervision with going in service periodical	TP on ground = no alarm
		2	with alarm measuring	TP on ground = no alarm
		3	only line supervision with TP invert	TP on ground = alarm
		4	line supervision with going in service periodical with TP invert	TP on ground = alarm
		5	with alarm measuring withTP invert	TP on ground = alarm
P3-low*	0	Normal / Inversmode		only valid for highpegel-line
		0	Normal Signaling (Idle: M=OFF / E=OFF)
		1	Inverse Signaling at M- and E-wire (Idle: M=ON / E=ON)
		2	Inverse Signaling only at E-wirer (Idle: M=OFF / E=ON)
		3	Inverse Signaling only at M-wire (Idle: M=ON / E=OFF)
P4		reserve
P5-high*	0	Quad-SICOFI Version		Parameter depends from version of QUAD-SICOFI
		0	Version not equal V2.3 (switched on only at talk-state)
		1	Version V2.3 (switched on always)
P5-low*	4	Last Look (LL)
		0-15	multiple of 1ms
P6-high*	0	reaction of pulse dialing at recognition of line signal		out
		0	continue pulse dialing
		1	suppress pulse dialing
P6-low *		reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	Highway / time slot release triggered by event
		0	Release of time slots / highways by receiving the event DB_EE_E_AUSLOESEN message	Works via COP ACKB and ACKF
		1	Release of time slots / highways by receiving the event DB_EE_E_KOMMEND_BTB message	This parameter must be set if the COP ACKB and/or ACKF are not set!

Longtimer	Default (ms)	Description		Remark
L1	625	sending time for release forward
L2	625	sending time for release backward
L3	0	reserve
L4	0	reserve
L5	200	max. recognition time for short pulse
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description		Remark
S1	40	min. recognition time for short pulse
S2	200	max. recognition time for invalid pulse
S3	0	reserve
S4	100	recognition time for end of dial (dial pause)
S5	0	reserve
S6	100	sending time for normal seizure
S7	100	sending time for test seizure
S8	0	reserve
S9	100	sending time for start dial seizure
S10	0	reserve
S11	100	sending time for answer
S12	200	time of ignore line signal after release from system
S13	40	time for glare seizure (12-200ms)
S14	0	reserve

Parameter	Default	Description		Remark
P1-high*	0	2 / 4 wire voice		only 4 wire voice implemented
		0	4 wire voice
		1	2 wire voice (fork)
P1-low*	0	E&M - type
		0	type IA (V)
		1	DC5
		2	type I
		3	type II
		4	HL / LL with type I	not used
		5	HL / LL with type IA (V)	not used
P2	0	Impedance-Index
			level A->D [dB] level D->A [dB] A / μ-law
		0	-3,5 -3,5 A	4 wire standard level C13
		1	-1,5 -1,5 A	Australia old
		2	+0,5 -4,5 A	GBR
		3	0 -6 μ	USA
		4	-4,5 -2,5 A	GUS
		5	-2,5 -4,5 A	BRD
		6	0 0 A	Australia new
		7	-7,0 0 A	standard level for 4-2 wire-converter with (-3,5/-3,5)
		8	0 -8,5 A	ITL railway + EVU
		9	+7 -16,0 A	Korea, Japan
		10	+4,3 -13,0 A	BRD, GUS, UNG C11-FDM
		11	+3,3 -12,0 A	GUS C11
P3-high*	0	low level-controling		not used
		0	only line supervision
		1	line supervision with going in service periodical
		2	with alarm measuring
P3-low	0	Normal / Inversmode		only valid for high level-line
		0	Normal Signaling (Idle: M=OFF / E=OFF)
		1	Inverse Signaling at M- and E-wire (Idle: M=ON / E=ON)
		2	Inverse Signaling only at E-wirer (Idle: M=OFF / E=ON)
		3	Inverse Signaling only at M-wire (Idle: M=ON / E=OFF)
P4		reserve
P5-high*	0	Quad-SICOFI Version		Parameter depends from version of QUAD-SICOFI
		0	Version not equal V2.3 (switched on only at talk-state)
		1	Version V2.3 (switched on always)
P5-low*	4	Last Look (LL)
		0-15	multiple of 1ms
P6-high*	0	reaction of pulse dialing at recognition of line signal		out
		0	continue pulse dialing
		1	suppress pulse dialing
P6-low *	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	Highway / time slot release triggered by event
		0	Release of time slots / highways by receiving the event DB_EE_E_AUSLOESEN message	Works via COP ACKB and ACKF
		1	Release of time slots / highways by receiving the event DB_EE_E_KOMMEND_BTB message	This parameter must be set if the COP ACKB and/or ACKF are not set!

Longtimer	Default (ms)	Description	Remark
L1	1300	sending time for release forward pulse or clear back acknowledge pulse (200-4000 ms)	out
L2	600	sending time for clear back pulse (200-4000ms)	inc
L3	5000	outgoing guard time	out/inc
L4	10000	supervision time of clear back acknowledge (5000-30000ms)	inc
L5	5000	maximum time for recognition of clear back or blocking end pulse (200-8000ms)	out/inc
L6	10000	maximum time for recognition of blocking pulse (1000-30000ms)	inc
L7	5000	supervision time of seizure acknowledge (1000-30000ms)	out

Shorttimer	Default (ms)	Description	Remark
S1	120	maximum time of recognition for seizure acknowledge (40-252ms)	out
S2	120	maximum time of recognition for seizure (40-240ms)	inc
S3	200	maximum time of recognition for dial pulse (40-240ms)	inc
S4	200	recognition time for end of dial (dial pause) (40-240ms)	inc
S5	0	reserve
S6	40	sending time of seizure (24-200ms)	out
S7	0	reserve
S8	0	reserve
S9	0	reserve
S10	0	reserve
S11	0	reserve
S12	200	minimum distance between 2 sending signals (40-252ms)	out/inc
S13	0	reserve
S14	0	reserve

Parameter	Default	Description		Remark
P1-high*	0	2 / 4 wire voice		only 4 wire voice implemented
		0	4 wire voice
		1	2 wire voice (fork)
P1-low*	0	E&M - type
		0	type IA (V)
		1	DC5
		2	type I
		3	type II
		4	HL / LL with type I	not used
		5	HL / LL with type IA (V)	not used
P2	0	Impedance-Index
			level A->D [dB] level D->A [dB] A / μ-law
		0	-3,5 -3,5 A	4 wire standard level C13
		1	-1,5 -1,5 A	Australia old
		2	+0,5 -4,5 A	GBR
		3	0 -6 μ	USA
		4	-4,5 -2,5 A	GUS
		5	-2,5 -4,5 A	BRD
		6	0 0 A	Australia new
		7	-7,0 0 A	standard level for 4-2 wire-converter with (-3,5/-3,5)
		8	0 -8,5 A	ITL railway + EVU
		9	+7 -16,0 A	Korea, Japan
		10	+4,3 -13,0 A	BRD, GUS, UNG C11-FDM
		11	+3,3 -12,0 A	GUS C11
P3-high*	0	low level-controling		not used
		0	only line supervision
		1	line supervision with going in service periodical
		2	with alarm measuring
P3-low*	0	Normal / Inversmode		only valid for highpegel-line
		0	normal signaling (Idle: M=OFF / E=OFF)
		1	inverse signaling at M- and E-wire (Idle: M=ON / E=ON)
		2	inverse signaling only at E-wirer (Idle: M=OFF / E=ON)
		3	inverse signaling only at M-wire (Idle: M=ON / E=OFF)
P4		reserve
P5-high*	0	Quad-SICOFI Version		Parameter depends from version of QUAD-SICOFI
		0	Version not equal V2.3 (switched on only at talk-state)
		1	Version V2.3 (switched on always)
P5-low*	4	Last Look (LL)
		0-15	multiple of 1ms
P6-high*		reserve
P6 - low*	0	seizure acknowledge		out/inc
		0	without seizure acknowledge
		1	with seizure acknowledge
P7-high*	0	clear back acknowledge		out
		0	no clear back acknowledge
		1	clear back acknowledge while receiving clear back (after min time for clear back P12*100ms)
		2	clear back acknowledge after end of clear back pulse
P7-low*	0	receive clear back acknowledge		inc
		0	no waiting for clear back acknowledge
		1	waiting for clear back acknowledge (after recognition of clear back acknowledge or supervision time out (L4) change to idle)
		2	waiting for clear back acknowledge (after recognition of clear back acknowledge change to idle. After supervision time out (L4) alarmmessage to DH. Waiting for clear back acknowledge or new seizure.)
P8-high*	0	going in service		out
		0	without line signal
		1	send release forward
		2	send seizure, release repeatedly
P8-low*	0	blocking from line		inc
		0	blocking with continuous signal
		1	blocking beginn with long pulse, blocking end with seizure or release forward pulse
P9	7	maximum time of recognition for seizure acknowledge (S1 < t < P9*100ms+S1) multiple of 100ms		out
P10	5	sending time for seizure acknowledge (P10*100ms) multiple of 100ms		inc
P11	3	minimum time of recognition for release forward (P11*100ms) multiple of 100ms		inc
P12	3	minimum time of recognition for clea back (P12*100ms) multiple of 100ms		out
P13	3	minimum time of recognition for clear back acknowledge (P13*100ms) multiple of 100ms		inc
P14	0	Highway / time slot release triggered by event
		0	Release of time slots / highways by receiving the event DB_EE_E_AUSLOESEN message	Works via COP ACKB and ACKF.
		1	Release of time slots / highways by receiving the event DB_EE_E_KOMMEND_BTB message	This parameter must be set if the COP ACKB and/or ACKF are not set!
		2	Release of time slots / highways by receiving the event DB_EE_E_AUSLOESEN message	The M_ON will be sent 40ms after E_OFF fix independent from any message from DH.

Longtimer	Default (ms)	Description		Remark
L1	700	sending time for release forward impulse (200-4000ms)		out
L2	2500	sending time for release backward impulse (200-4000ms)		in
L3	0	reserve
L4	360	minimum recognition time for release backward impulse and maximum recognition time for seizure acknowledge, start dial signal, end-of-dial and answer (S1 + L4) (200-4000ms)		out
L5	400	minimum recognition time for release forward impulse and maximum recognition time for seizure and dial pulse (200-4000ms)		in
L6	0	reserve
L7	0	reserve

Shorttimer	Default (ms)	Description		Remark
S1	40	minimum recognition time for seizure acknowledge, start dial signal, end-of-dial and answer (20-255ms)		out
S2	100	guard time for incoming seizure after release from DH (20-255ms)		out/in
S3	0	reserve
S4	132	recognition time for end-of-digit (40-240ms)		in
S5	0	reserve
S6	60	sending time for seizure impulse (24-200ms)		out
S7	24	minimum recognition time for dial impulses (12-240ms)		in
S8	60	sending time for seizure acknowledge impulse (24-200ms)		in
S9	60	transmission time for start dial signal impulse (24-200ms)		in
S10	60	sending time for end-of-dial impulse (24-200ms)		in
S11	60	sending time for answer impulse (24-200ms)		in
S12	0	reserve
S13	36	minimum recognition time for seizure impulse (24-255ms)		in
S14	20	minimum recognition time for dial pause (12-255ms)		in

Parameter	Default	Description		Remark
P1-high*	0	2 / 4 wire voice		only 4 wire voice implemented
		0	4 wire voice
		1	2 wire voice (Hybrid)
P1-low*	0	E&M - type
		0	type IA (V)
		1	DC5
		2	type I
		3	type II
		4	HL / LL with type I	HL: high level supervion
		5	HL / LL with type IA (V)	LL: low level supervision
P2	0	Impedance index
			level A->D [dB] level D->A [dB] A / μ-law
		0	-3,5 -3,5 A	4 wire standard level C13
		1	-1,5 -1,5 A	Australia old
		2	+0,5 -4,5 A	GBR
		3	0 -6 μ	USA
		4	-4,5 -2,5 A	GUS
		5	-2,5 -4,5 A	BRD
		6	0 0 A	Australia new
		7	-7,0 0 A	standard level for 4-2 wire-converter with (-3,5/-3,5)
		8	0 -8,5 A	ITL railway + EVU
		9	+7 -16,0 A	Korea, Japan
		10	+4,3 -13,0 A	BRD, GUS, UNG C11-FDM
		11	+3,3 -12,0 A	GUS C11
P3	32	Low level supervision control / Normal / Inverse mode		LL only if P1-low = 4 or 5, only the alarm measuring is used (optional)
P3-high*	2	Low level supervision control (TP-low level)
		0	only line supervision	TP on ground = no alarm
		1	line supervision with going in service periodical	TP on ground = no alarm
		2	with alarm measuring	TP on ground = no alarm
		3	only line supervision with TP invert	TP on ground = alarm
		4	line supervision with going in service periodical with TP invert	TP on ground = alarm
		5	with alarm measuring withTP invert	TP on ground = alarm
P3-low*	0	Normal / Inverse mode
		0	Normal Signalling (Idle: M=OFF / E=OFF)
		1	Inverse Signalling for M- and E-wire (Idle: M=ON / E=ON)
		2	Inverse Signalling only for E-wire (Idle: M=OFF / E=ON)
		3	Inverse Signalling only for M-wire (Idle: M=ON / E=OFF)
P4		reserve
P5-high*	0	Quad-SICOFI Version		Parameter depends on QUAD-SICOFI-Version
		0	Version different from V2.3 (on only in talk state)
		1	Version V2.3 (always on)
P5-low*	4	Last Look (LL)
		0-15	(... x 1ms)
P6	0	reserve
P7	0	reserve
P8	0	reserve
P9	0	reserve
P10	0	reserve
P11	0	reserve
P12	0	reserve
P13	0	reserve
P14	0	Highway / time slot release triggered by event
		0	Release of time slots / highways by receiving the event DB_EE_E_AUSLOESEN message	Works via COP ACKB and ACKF
		1	Release of time slots / highways by receiving the event DB_EE_E_KOMMEND_BTB message	This parameter must be set if the COP ACKB and/or ACKF are not set!