155.2.3
DELETE-RCSU
Created recorders are deleted by means of the function DELETE-RCSU. Only the port location has to be entered to cancel a recorder.
A recorder which is in the ready state cannot be deleted unless deactivated by AMO DSSU. When a recorder is to be deleted, it should be deactivated immediate (DEA-DSSU:DI,...).
To determine the status of the recorder, use AMO SDSU
(DIS-SDSU:,,PEN,PER3,<LTG>,<LTU>,<SLOT>,<CIRC>;).
A recorder may not be deleted if referenced by AMO DNIT or AMO ACDRT.
Procedure Overview
Command Code
Parameter
DELETE-RCSU
PEN=<GG-UU-BBB-SS>;
Examples:
1.
Delete the recorder at port 1-2-13-5.
Input:
DEL-RSCU:PEN=1-2-13-5;
Output:
H02: RECORDER AT PORT 01-02-013-05 HAS BEEN DELETED.
2.
Delete the recorder at port 1-4-13-3.
Input:
DEL-RCSU:PEN=1-4-13-3;
Output:
H02: RECORDER AT PORT 01-04-013-03 HAS BEEN DELETED.
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.