166.2.5
REGENERATE-SBCSU
The REGENERATE action outputs the data of an S0 bus configuration as one or more position-oriented command listings for the ADD action of this AMO. The type of data output corresponds to that of the DISPLAY action with TYPE=TERMDATA.
By specifying any station number of a bus, OPTISET configuration or S0/S2 point-to-point connection all ADD commands will be regenerated.
Procedure Overview
Command Code
Parameter
REGENERATE-SBCSU
[STNO=<number>];
Examples
1.
Regenerate the OPTISET configuration with STNO 3427
Input:
REGEN-SBCSU:3427;
Output:
ADD-SBCSU:3427,OPTI,DIR,1-1-67-1,OPTISET&DTE&FAX,1&5&2,
5,6,11,12,21,22,0,0,N,0,0,,,N,0,0,N,
"SBDSS1","SBDSS1",Y,0,N,N,N,Y,N,10,10,
,,,,,5,,,,N,NORMAL,
Y,SPANISH,0,,,0,,,,,,,,,;
ADD-SBCSU:3428,OPTIEXP,3427,OPTIP500,3,
5,6,11,12,21,22,0,0,N,0,0,,,N,0,0,N,
,,,0,N,N,N,Y,N,,,,,,,,5,N,NORMAL,,
Y,SPANISH,0,,,0,,,,,,,,;
ADD-SBCSU:3428,MSN,3427,,5,6,11,12,21,22,0,N,0,0,,,Y,N,N,5,;
ADD-SBCSU:4999,MSN,3427,,5,6,11,12,21,22,0,N,0,0,,,Y,N,N,5,;
2.
Regenerate the S0 bus configuration with STNO 3525
Input:
REGEN-SBCSU:3525;
Output:
ADD-SBCSU:3525,FBUS,PNT,1-3-67-1,SET600&DTE&FAX,
5,6,11,12,21,22,0,0,N,0,0,,,
"SBNIBRI","SBNIBRI","SBNIBRI",Y,Y,0,7,7,7,UDI64,,N,N,,5,0,;
3.
Regenerate the S2 point-to-point connection with STNO 3460
Input:
REGEN-SBCSU:3460;
Output:
ADD-SBCSU:3460,FPP,EXT,1-2-25-0,S2PP,5,6,11,12,21,22,0,0,N,0,0,,,
"SBDSS1",Y,Y,0,10,N,N,,,5,0;
ADD-SBCSU:3461,MSN,3460,,5,6,11,12,21,22,0,N,0,0,,,Y,N,N,5,;
ADD-SBCSU:3462,MSN,3460,,5,6,11,12,21,22,0,N,0,0,,,Y,N,N,5,;
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.