167
SCREN - Screening of calling or connected numbers
Restrictions
Functions of the AMO
Error Messages and Advisories
Interrelationships
Parameter Description
With the AMO SCREN the screening data and screening patterns are configured to a virtual source node number SNNO. The connection between screening patterns and the source node number is the screening pattern plan which the screening patterns have been assigned to. The configured data and patterns will be used to check the screening of a calling or connected number to a E-DSS1 connection. The number will be assigned to the virtual node number by the B-channel (AMO TDCSU: NNO, see also AMO KNDEF: TYPE=FOREIGN).
parameter SCRP
The following rules must be obeyed for the screening patterns:
A screening pattern consists of up to 22 characters, following characters are valid: "0" to "9" and "*", the wildcard "x" and "#". After the character "#" no other characters may be entered. After the character "x" only "x" or "#" may follow.
parameter SNNO
The following rules must be obeyed for the virtual source node number:
The SNNO consists of up to 3 levels in the form <level2> - <level1> - <level0>.
Possible Values:
level0 : 0-999
level1 : 0-253
level2 : 0-29
The input 0 for SNNO and the form x-0-x even with valid values for level2 and level0 will be rejected.
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.