167.5 Error Messages and Advisories

167.5.1 Error Messages

 
F01:
NO DATA CONFIGURED FOR THIS SOURCE NODE NUMBER <level2-level1-level0>
F02:
NO VALID SCREENING PATTERN <scrp> ENTERED,
 
POSSIBLE CHARACTERS (0-9, *, X, #),
 
AFTER 'X' ONLY 'X' OR '#' MAY FOLLOW,
 
AFTER '#' MAY NOT ENTERED ANY CHARACTERS
F03:
THE SCREENING PATTERN <scrp> HAS BEEN ALREADY CONFIGURED
 
FOR THIS SCREENING PATTERN PLAN
F04:
MAX. AMOUNT (<maxval>) OF SCREENING PATTERNS HAS BEEN REACHED FOR THIS PLAN
F05:
THE SCREENING PATTERN <scrp> HAS NOT BEEN CONFIGURED
F06:
NO MORE MEMORY IN DATABASE (AMO DIMSU:TYP = CC, PARAMETER <param>)
F07:
WRITE TO DATABASE FAILED, INTERNAL DB-ERROR
F08:
THE SOURCE NODE NUMBER MAY NOT BE 0
F09:
LEVEL<level> OF SOURCE NODE NUMBER MAY NOT EXCEED VALUE <maxval>
F10:
LEVEL1 OF SOURCE NODE NUMBER MAY NOT BE 0
 
IF LEVEL2 AND LEVEL0 ARE NOT 0
 
(EXAMPLE: 1-0-1 IS NOT POSSIBLE)
F11:
THE SCREENING DATA FOR SOURCE NODE NUMBER <level2-level1-level0> HAS ALREADY BEEN CONFIGURED
F12:
NO VALID DEFAULT NUMBER OPERATOR <dno> ENTERED,
 
POSSIBLE CHARACTERS (0-9, *)
F13:
NO VALUE FOR PARAMETER DNO CONFIGURED,
 
CHANGEING THE PARAMETER DNOTON IS NOT POSSIBLE
F14:
THE SCREENING PATTERN PLAN <scrpplan> HAS NOT BEEN CONFIGURED
F15:
FOR THE SOURCE NODE NUMBER <level2-level1-level0> THE SCREENING PATTERN PLAN
 
HAS NOT BEEN CONFIGURED, CHANGEING THE PARAMETER SCRPTON IS NOT POSSIBLE
F16:
IF PARAMETER SCRPPLAN IS SPECIFIED, PARAMETER SCRPTON IS NEEDED AS WELL
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.