168.2.2
CHANGE-SCSU
All data except
•
the device configuration,
•
the Port Equipment Number (PEN)
can be changed.
AMO SXSU is used for changing the DVCFIG or PEN and for exchanging station numbers (between two stations).
If
T
EXTSEL ha
s t
o be changed, the circuit must be locked. This can be performed by AMO DSSU or by specifying parameter OFFTYPE in AMO SCSU.
Changing some circuit specific data requires downloading into the module. Such data includes the parameters COFIDX, CCTIDX,
P
ULSTYPE, PULSLEV and DHPAR=[LEDSIGN, MWLED, RING1]
a
nd DIAL. The data is loaded using
–
the commands DEACTIVATE and (re-)ACTIVATE-DSSU "with unconditional loading" (e.g. RESTART-DSSU)
–
parameter OFFTYPE=DC (Default) or OFFTYPE=DI. The circuit must be in READY or UNACH state (can be interrogated by AMO SDSU). In UNACH state, data is loaded automatically when hierarchy becomes ready
.
A
station number cannot be changed to another station number if the original station number is in an ACD Routing Table or has assigned an ACD-Attribute
.
Procedure Overview
Command Code
Parameter
CHANGE-SCSU
STNO=<number>,
,{[DPLN=<number>],[ITR=<number>]
,[COS1=<number>],[COS2=<number>]
,[LCOSV1=<number>],[LCOSV2=<number>]
,[LCOSD1=<number>],[LCOSD2=<number>]
,[SPDC1=<number>],[SPDC2=<number>]
,[COSX=<number>],[SPDI=<number>],[COFIDX=<param]
,[CCTIDX=<number>]
,[SPEC=<param>],[DIAL=<param>]
,
[DHPAR=<param>
],[RCBKB=<param>],[RCBKNA=<param>]
,
[TEXTSEL=<param>]
,[NEWNO=<number>]
,[ACKST=<param>],[SSTNO=<param>]
,[COTRACE=<param>],[ALARMNO=<number>]
,[PULSTYPE=<param>],[PULSLEV=<param>]
,[HMUSIC=<number>]
,[OFFTYPE=<param>]
,[CONN=<param>],[FLASH=<param>],[DTMFBLK=<param>]
,[PMIDX=<number>],[NEONMWI=<param>]};
Example
Change COS 1 and 2 for subscriber 261.
Input:
CHANGE-SCSU:STNO=261,COS1=5,COS2=6;
Output:
H09: 261 STATION DATA CHANGED.
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.