168.2.4 DISPLAY-SCSU

The following data can be displayed:
1.
Station numbers of users who have been assigned a specific COS.
2.
Station numbers of users with specific characteristics (see parameter STNTYPE).
3.
Station numbers of users who have been assigned a specific LCOSV.
4.
Station numbers of users who have been assigned a specific LCOSD.
5. Station numbers with a specific attribute (see parameter ATTR).
6. Station numbers with a specific connection type.
7.
All connection-specific data.
Procedure Overview
 
Command Code
Parameter
DISPLAY-SCSU
[STNO=<number>]
 
,[TYPE=COS],COSNO=<number>; (1)
 
 
 
|[TYPE=HW],STNTYPE=<param>; (2)
 
 
 
|[TYPE=LCOSV],LCOSV=<number>; (3)
 
 
 
|[TYPE=LCOSD],LCOSD=<number>; (4)
 
 
 
|[TYPE=ATTR],ATTR=<param>; (5)
 
 
 
|[TYP=CONN],CONN=<param>; (6)
 
 
 
|[TYPE=ALL]; (7)
Examples
1.
Interrogate all subscribers with COS=1 assigned
Input:
DISPLAY-SCSU:TYPE=COS,COSNO=1;
Output:
--------------------------------------------------------
STATION WITH COS = 1
--------------------------------------------------------
2100 2109 2110 2111 2112 2113
2114 3105 3106 3107 3114 3115
3153 3154 3158 3160
--------------------------------------------------------
2.
Interrogate all analog subscribers with charge metering equipment
Input:
DISPLAY-SCSU:TYPE=HW,STNTYPE=ANATECM;
Output:
--------------------------------------------------------
STATION(S) WITH CHARGE METERING
--------------------------------------------------------
450 451 452 453 454 455
470 471 472 473 474 475
--------------------------------------------------------
3.
Interrogate the subscribers in the directory number range 200 to 230 with the subscriber class of service DTMF (dual tone multifrequency pushbutton dialing).
Input:
DISPLAY-SCSU:STNO=200&&230,TYPE=HW,STNTYPE=DTMF;
Output:
--------------------------------------------------------
STATION WITH DUAL TONE MULTIPLE FREQUENCY
--------------------------------------------------------
200 201 202 203 204 205
206 207 208 209 220 221
222 223 224 225 226 227
228
--------------------------------------------------------
4.
Interrogate all signed off stations
Input:
DISPLAY-SCSU:TYPE=ATTR,ATTR=SIGNOFF;
Output:
--------------------------------------------------------
SIGNED OFF STATION(S)
--------------------------------------------------------
2140 2141 2142
--------------------------------------------------------
5.
Interrogate all data for subscriber 2110
Input:
DISPLAY-SCSU:STNO=2110;
Output:
------------------------------- USER DATA -----------------------------------
STNO =2110 COS1 =22 DPLN =0 SPDI =10
PEN = 1- 1- 25- 0 COS2 =1 ITR =7 SPDC1 =0
DVCFIG =ANATE LCOSV1 =1 COSX =0 SPDC2 =1
INS =YES LCOSV2 =1 RCBKB =NO
ALARMNO =0 LCOSD1 =1 HMUSIC =0 RCBKNA =NO
SSTNO =NO COTRACE =NO LCOSD2 =1 SPEC =
COFIDX =0 DIAL =DTMF PULSTYPE= PULSLEV=
CCTIDX = ACKST = TEXTSEL=
DHPAR =
CONN =DIR FLASH =YES DTMFBLK =NO WITKEY :NO
------------------- ACTIVATION IDENTIFIERS FOR FEATURES ---------------------
DND :NO CWT :NO
HTOS :NO HTOF :NO HTOD :NO VCP :NO
--------------------- FEATURES AND GROUP MEMBERSHIPS ------------------------
PUGR :1 HUNTING GROUP : NO
NIGHT OPTION : YES
------------------------- STATION ATTRIBUTES (AMO SDAT) ---------------------
KN VC
-----------------------------------------------------------------------------
THIS STATION IS ENTERED IN NIGHT OPTION 1.
The output data for a station is subdivided into 3 groups:
1.
Data which are also contained in the input command (marked by "=").
2.
Activation identifiers for the features.
3.
Features and group memberships which are not assigned by the AMO SCSU.
Explanation of ACTIVATION IDENTIFIERS FOR FEATURES
 
HTOS
:
Hunting group out, voice (release from hunting group)
HTOF
:
Hunting group out, FAX
HTOD
:
Hunting group out, DTE
DND
:
Do-not-disturb
VCP
:
Voice call protection
CWT
:
Call waiting - terminating
WITKEY
:
Witness Key
Explanation of FEATURES AND GROUP MEMBERSHIPS
 
PUGR
:
Included in a call pickup group
HUNTING GROUP
:
Included in a call hunting group
NIGHT VARIANT
:
Included in a night service variant
STATION ATTRIBUTES
:
Attributes which can only be set and reset by AMO SDAT. The description of the attributes can be found in AMO description (AD) of SDAT
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.