170.4
Parameter Description
AREA
Area within the Server
Type of Input
:
1 bis 4 single values, optional
Possible Values
:
LN
module of the line preiphery
CHAN
channels
FILE
module of the storage periphery with connected devices
Default Value
:
LN
LINK
Type of status search function
Type of Input
:
Single value, optional
Possible Values
:
OR
a system section is displayed if at least one of the wanted states is set
AND
a system section is only displayed if all wanted states have been set
Default Value
:
OR
Note
:
This parameter is only effective if something has been entered for parameter STATUS.
STATUS
Module states of the SERVER to be output
Type of Input
:
1 bis 4 single values, optional
Possible Values
:
NCR
not created
CREA
created
PRES
present
INS
in service
AMO
manually blocked by means of an AMO
BLKY
manually blocked by means of a key
DEF
blocked by dependability due to a fault
CHECK
seized by dependability
DYNINIT
hierarchically blocked
UNACHLBC
hierarchically blocked LBC
UNACHLCX
hierarchically blocked LCX
ALL
all states
Default Value
:
Only out-of-service states are output.
The states INS and CHECK and the combination of NCR and NPR are not output.
Note
:
During input the type of search can be affected by means of parameter LINK.
In the case of memory periphery devices, parameter AREA=FILE, this parameter has no effect on the output.
UNIT
System part which is to carry out the STATUS interrogation
Type of Input
:
Single value,optional
Possible Values
:
A1
= Administration
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.