172.2.2 CHANGE-SELG

Change one or more entries in a selection group, or a selection table. The user can simultaneously change the selection tables of a selection group when changing this selection group.
As is the case when creating the selection group, only specific combinations of parameter values are possible (see above). The same tests carried out for the action ADD-SELG are also executed for the action CHANGE-SELG.
If the base or reserve device is changed, the AMO checks whether the formats in the selection tables are still compatible with the devices. If the entries are not compatible, the selection tables containing incompatible entries are also changed. When changing one or more values of the selection table, the AMO verifies the compatibility of the parameter values (as for ADD-SELG).
1.
Change entries in a selection group
2.
Change entries in a selection table
Procedure Overview
 
Command Code
Parameter
 
CHANGE-SELG
TBL=SELG,SELGNO=<number>,{(min 1)RESOP=<string>
(1)
 
,BASDEV=<string>,RESDEV=<string>
 
 
,BLBAS=<number>,BLRES=<number>};
 
 
 
 
 
|TBL=SELT,SELGNO=number>,SELTABNO=<number>
(2)
 
,[FORMBAS=<string>],[FORMRES=<string>]
 
 
,[TARIF=<string>],[DESTCNT=<string>],[CDRCD=<number>]
 
 
,[SERVICE=<string>],[ATNDGR=<number>],[CTYPE=<string>]
 
 
,[PAYPARTY=<string>],[CDRC=<string>]
 
 
,[CDRSTA=<string>],[THRGCON=<string>]
 
 
,[NSTAT=<string>],[SECTION=<string>],[CDCHU=<string>]
 
 
,[CDRAC=<string>],[SFSETUP=<string>],[CDBAD=<string>]
 
 
,[CDRULTE=<string>],[CONNT=<string>],[PCODE=<string>]
 
 
,[PPCF=<string>],[STATAB1=<string>],[STATAB2=<string>]
 
 
,[DNOTBL1=<string>],[DNOTBL2=<string>]
 
 
,[CDRULT=<number>],[CONNTL=<number>],[LEVEL0=<number>]
 
 
,[LEVEL1=<number>],[LEVEL2=<number>],[TIELINE=<param>]
 
 
,[EXPENS=<param>],[CONNTYP=<string>],[COPIN=<number>]
 
 
,[CARRIER=<number>],[RECTYP=<string>];
 
Examples:
1.
In selection group 1, the base device is to be changed to DEV1.
Input:
CHANGE-SELG:TBL=SELG,SELGNO=1,BASDEV=DEV1;
2.
The communication service values FAX and DTE are to be entered in selection table 2 of selection group 1.
Input:
CHANGE-SELG:TBL=SELT,SELGNO=2,SELTABNO=1,SERVICE=FAX&DTE;
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.