172.2.3
DELETE-SELG
When a selection field is deleted, the user can specify whether the entire field (selection group), or only one selection table from a selection group is to be deleted.
When a selection group is deleted, the operating state of the selection group is set to "OFF_WITHOUT_QUEUING". The respective entries for the base and reserve devices are set to NODEV, the block sizes (base and reserve) and the number of queued calls (CNTQEL) are set to 0, and all the selection tables in this selection group are deleted.
When one selection table is deleted in a selection group, all of the entries in this selection table are deleted.
If the last selection table in the selection group is deleted, then the selection group is set to "OFF_WITHOUT_QUEUING".
Procedure Overview
Command Code
Parameter
DELETE-SELG
SELGNO=<number>,[SELTABNO=<number>];
Example
1.
Selection table 2 is to be deleted in selection group 3.
Input:
DELETE-SELG:SELGNO=3,SELTABNO=2;
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.