172.3 Parameter Description

172.3.1 Parameter Description for Selection Groups

The parameters RESOP, BASDEV, RESDEV, BLBAS and BLRES form a min-1-group for the function CHANGE-SELG. At least one of these parameters must be declared.
 
BASDEV
Base output device
 
(See AMO-GEZU for dev. alloc. table)
 
 
Type of Input
:
Single value, required (ADD)
 
 
 
2. parameter of a min-1-group (CHANGE)
 
Possible Values
:
ATTEND
Display on attendant console
 
 
 
CDRC1
Call detail recording - central, file 1
 
 
 
CDRC2
Call detail recording - central, file 2
 
 
 
CDRS
Station call detail recording file
 
 
 
TAPE
Output on magnetic type
 
 
 
DPS
ON-LINE Transmission to DPS
 
 
 
DEV1
Output on device 1
 
 
 
DEV2
Output on device 2
 
 
 
DEV3
Output on device 3
 
 
 
DEV4
Output on device 4
 
 
 
FT
File for file-transfer
 
 
 
 
 
 
DEV1 to DEV4 are devices for individual customers with V254 interfaces that must be allocated to a physical device via the AMO-GEZU.
 
In fast output mode (see AMO-FEACG, Fast output) only the values TAPE, DPS, FT, will be accepted as entry
 
 
 
 
 
BLBAS
Block size of base output device
 
(’Block size’ is understood to mean the number of call detail records per output block).
 
Type of Input
:
Single value, required (ADD)
 
 
 
4. parameter of a min-1-group (CHANGE)
 
Possible Values
:
1 - 127
 
Important Note:
:
Always enter the value 1 (individual output) for the device type ’ATTEND’.
 
 
 
 
 
BLRES
Block size of reserve output device (see BLBAS)
 
Type of Input
:
Single value, required (ADD)
 
 
 
5. parameter of a min-1-group (CHANGE)
 
Possible Values
:
0 - 127
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
RESDEV
Reserve output device
 
(See AMO-GEZU for device allocation table)
 
Type of Input
:
Single value, required (ADD)
 
 
 
3. parameter of a min-1-group (CHANGE)
 
Possible Values
:
NODEV
No device
 
 
 
ATTEND
Display at attendant console
 
 
 
CDRC1
Call detail recording - central, file 1
 
 
 
CDRC2
Call detail recording - central file 2
 
 
 
CDRS
Station call detail recording file
 
 
 
TAPE
Output on magnetic device
 
 
 
DPS
ON-LINE transmission to DPS
 
 
 
DEV1
Output on device 1
 
 
 
DEV2
Output on device 2
 
 
 
DEV3
Output on device 3
 
 
 
DEV4
Output on device 4
 
 
 
FT
File for file-transfer
 
 
 
 
 
 
Important Note
:
The device type of the reserve device need not be the same as that of the base device.
 
 
 
A reserve device entry is not permissible in the following instances:
 
 
 
Base device
= ATTEND
 
 
 
Base device
= CDRS
 
 
 
 
 
 
 
 
In fast output mode
only values TAPE, DPS, FT will be accepted as entry.
 
 
 
 
 
RESOP
Reserve mode operation
 
Type of Input
:
Single value, required (ADD)
 
 
 
1. parameter of a min-1-group (CHANGE)
 
Possible Values
:
Y
If a reserve device has been specified, reserve operation is started immediately in the event of a defective base device.
 
 
 
N
If a reserve device has been specified, reserve operation is not started until the queue capacity limit is reached.
 
 
 
 
Prior to each output on the reserve device, a check is made to determine whether the base device is still defective. Output is automatically switched to the base device as soon as it is repaired.
 
 
 
 
 
SELGNO
Selection group number
 
Type of Input
:
Single value,
 
 
 
required (ADD, CHANGE, DELETE),
 
 
 
optional (DISPLAY, REGENERATE)
 
Possible Values
:
1 - 4
 
 
 
 
 
 
TBL
SELG options: selection group or selection table
 
Type of Input
:
Single value, required (ADD,CHANGE)
 
Possible Values
:
SELG
Selection group
 
 
 
SELT
Selection table
 
 
 
 
 
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.