174.2.5
DISPLAY-SELS / REGENERATE-SELS
1.
Interrogate the operating states of the selection groups with output in list format (DISPLAY).
2.
Interrogate the operating states of the selection groups with output in position-oriented commands for the regeneration (SAVDB). There is only an output of the active selection groups (state "ON").
Procedure Overview
Command Code
Parameter
DISPLAY-SELS
[SELGRNO=<number>];
(1)
|REGENERATE-SELS
[SELGRNO=<number>];
(2)
Examples
1.
Interrogate the operating states of all selection groups
Input:
DISPLAY-SELS;
Output:
OPERATING CONDITIONS OF THE SELECTION GROUPS
SELGRNO OPERATING CONDITION
1 ON
2 STOP
3 STOP
4 STOP
2.
Interrogate the operating state of selection group 1:
Input:
DISPLAY-SELS:1;
Output:
OPERATING CONDITIONS OF THE SELECTION GROUPS
SELGRNO OPERATING CONDITION
1 ON
3.
Interrogate the operating states of all selection groups for the regeneration.
Input:
REGEN-SELS;
Output:
ACTIVATE-SELS:1;
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.