175.3.8 REGENERATE-SIGNL

This action regenerates all SDT (status), FET (output authorization, priority, current and configured symbolic output devices), FST (error number, DEP action and priority) data administered by the AMO-SIGNL and FMTEXT and SWITCH settings.
Procedure Overview
 
Command Code
Parameter
REGENERATE-SIGNL
;
Example
Input:
REGENERATE-SIGNL;
Output:
REGENERATE-SIGNL;
H500: AMO SIGNL STARTED

CHANGE-SIGNL:EVT,LNOVER ,FREE;
CHANGE-SIGNL:EVT,AM ,FREE;
CHANGE-SIGNL:EVT,BOARD ,LOCK;
.....
.....
.....
DELETE-SIGNL:EVT,ALL,ALL,ALL; (*1)
CHANGE-SIGNL:MID,F,2100,FREE,E4,DPT1&DPT2,DPT1↦
CHANGE-SIGNL:MID,F,2101,LOCK,M1,DPT1&ATND,DPT1&DPT2;
CHANGE-SIGNL:MID,M,2102,FREE,E2,DPT1&MAP,DPT1↦
.....
.....
.....
ADD-SIGNL:FST,1090,INSERV ,E4;
ADD-SIGNL:FST,1100,HRCCZZA ,M2;
ADD-SIGNL:FST,1110,HRCCZZS ,M2;
.....
DEACTIVATE-SIGNL:IMPTMSG,DPT1&DPT2&DPT3&AFR1&AFR2&AFR3&ATND
DEACTIVATE-SIGNL:FILTER,DPT1&DPT2&DPT3&AFR1&AFR2&AFR3&ATND
DEACTIVATE-SIGNL:ALLMSG,DPT1&DPT2&DPT3&AFR1&AFR2&AFR3&ATND
..DEACTIVATE-SIGNL:SHORTFM,DPT1&DPT2&DPT3&AFR1&AFR2&AFR3&ATND
ACTIVATE-SIGNL:FILTER,AFR1&ATND
...
ADD-SIGNL:F,2468,"this is a user defined text"; .....

AMO-SIGNL -... ERROR SIGNALLING CONTROL
REGENERATE COMPLETED;
(*1) Using this delete command, all symbolic devices for all messages are canceled. This is necessary, since only those devices which would otherwise remain in the standard data base
can be added with the CHANGE function.
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.