180.3 Parameter Description


CCNO	Code calling access code (STNO of the CC terminal connection) The CCNO must not be assigned yet. The size of the STNO range depends on the maximum number of single CC.
	Type of Input	:	single value, mandatory
	Possible values	:	0 - 9

CLASSMRK	DNIL classmarks (for feature IPDA)
	Type of Input	:	max. 4 single values, concatenated with ’&’, optional (ADD)
			VAD	voice activity detection
			EC	echo cancellation
			G711	no voice compression, according to G.711
			G729	voice compression (mandatory) according to G.729A
			G729OPT	voice compression (optional) according to G.729A
			INIT	initialisation of classmarks to default
			NONE	deactivation of all classmarks
	Default Value		EC&G711& G729OPT

COFIDX	Index of COFI data file to be loaded (index of a data block with which the SICOFI components must be loaded on an SLMA)
	Type of Input	:	single value, optional
	Possible values	:	0- data block for short lines (L < 100 m) 1- data block for lines of medium length (100 m < L < 1000 m) 2- data block for long lines (L > 1000 m)
	Default Value	:	0

COS	Class of service
	Type of Input	:	single value, mandatory
	Possible values	:	0 - 1199

CPCALL	HICOM-signal. Every CPCALL belongs to one EXTANN.
	Type of Input	:	single value, 1 to max. 16 values, optional (ADD, DELETE)
	Possible values	:	ALERT	notification/alert tone,
			ANNICPT	announcement for attendant intercept,
			BONHK	B party on hook,
			BUSY	busy tone,
			CAMP	knocking/camp-on/call waiting tone,
			CBKALERT	call back alert tone,
			CONFTN	conference tone,
			CONG	congestion tone,
			DATA	data tone,
			DND	do not disturb tone,
			EXTDTN	external dial tone,
			EXTDTN2	secondary CO dial tone,
			FRNGBK	fist burst of ringback tone,
			HOLDLINE	hold the line please
			NOPO	not possible,
			IMPOSSFM	impossible for the moment,
			INTDTN	internal dial tone,
			KNCONF	camp-on tone for conference,
			LOCANN	local announcement,
			MUSIC	music on hold,
			MWI	message waiting information,
			NACK	negative acknowledgement tone,
			NODIAL	timeout tone if digits not dialed,
			NOTALWD	not allowed,
			NOTREACH	not reachable,
			NU	number obtainable tone,
			OVR	automatic override tone,
			OVRTN	override tone,
			OVRWARN	override warning tone,
			PACK	positive acknowledgement tone,
			PACKWD	positive ack. tone with dialing,
			REORDER	reorder tone,
			RNGBK	ringback tone,
			RTO	RTO test tone,
			SPEC	special dial tone,
			TEST	test tone,
			VOICEMAL	voice mail,
			HOLD	call waiting tone
			DISCTONE	disconnect tone
			HOLDEXT	holdtone external
			HOLDH1	holdtone hold 1
			HOLDH2	holdtone hold 2
			HOLDINT	holdtone internal
			HOLDCC	holdtone for code calling syst.
			HOLDHT	holdtone for hunting group
			FCAMP	first camp on tone
			HOLDHT	call monitoring alerting tone
			CCMABSEN	ccm tracer in rack

DPLN	Dial plan group
	Type of Input	:	single value, optional
	Possible values	:	0 - 15
	Default Value	:	0

INS	Station in service? (putting the terminal connection into service by means of the centralized device status administration)
	Type of Input	:	single value, optional
	Possible values	:	Y, N
	Default Value	:	Y

ITR	Internal traffic restriction group / closed user group
	Type of Input	:	single value, mandatory
	Possible values	:	0 - 15

LCOSV1	LCR class of service 1
	Type of Input	:	single value, mandatory
	Possible values	:	1 - 32

LTU	LTU Number
	Type of Input	:	1 to 4 single values, concatenated with & or &&, optional
	Possible values	:	numeric, 1-15, 17-99

MSGRNO	Messenger station number The MSGRNO must not be assigned yet. The MSGRNO must not be greater than the STNO + the maximum number of executive/secretary systems.
	Type of Input	:	single value, mandatory
	Possible values	:	101 - 999

MSTNO	VMX message waiting information station number
	Type of Input	:	single value, mandatory
	Possible values	:	0 - 9

PEN	Port equipment number of station (terminal connection of the special station: LTG-LTU-SLOT-CCT) If an entered module is not specified within the "6" grouping, it is automatically corrected to the next lowest permitted trunk number.
	Type of Input	:	single value, optional (g-uu-sss-ccc)
	Possible values	:	g	= LTG Number: 1 (no other value)
			uu	= LTU Number: 1-15 in HHS (host Shelf) 17-99 in AP (Access Point Shelf) 16 not defined
			sss	= SLOT Number: 1-121; slot in groups of 6 except 61 or 25-121 except 73 for compact shelfs
			ccc	= Circuit Number: 0-254
A suitable module must be configured to the slot addressed by PEN (AMO BCSU).
The possible LTU and Slot values for PEN depend on the systems architecture and can be found in the BCSU AMO description.
The possible Line values depend on the module type and its functionality. They can be listed using DISP-BCSU: TYPE=PEN [,LTG=, LTU=, SLOT=, CCT=]; which will also output the actual PEN status (e.g. NOT CONNECTED).

TYPE	Special station type
	Type of Input	:	single value, mandatory
	Possible values	:	MSGR, GENANS, CC, VMXMWI (TYPE=ALL is also possible for DISPLAY)

UNANO	Device number of night answer station / bell (STNO of the GENANS terminal connection) The UNANO must not be assigned yet. The size of the STNO range depends on the maximum number of answering stations.
	Type of Input	:	single value, mandatory
	Possible values	:	0 - 15

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.