181 SSCSU - Special Subscriber Terminal Configuration in the SWU

 
Cross References
Parameter Description
Functions of the AMO
Error Messages and Comments
The AMO SSCSU configures special subscriber terminals. In addition to subscriber terminal configuration, the AMO SSCSU enables the relevant data to be displayed, regenerated and changed and the terminals to be deleted.
Functionalities configured by the AMO SSCSU:
4.
The following terminals can be configured for the Hicom Trading Board (HTB):
•
HTBMNGR: HTB manager with S0 adapter
•
HTBPHONE: HTB terminals are configured as optisets
•
HTBLINE: Logical optisets, represents the lines to which the HTB PHONES connect
•
HTBEXT: HTB extension connections are used for communication between remote HTB groups
•
DTE: Data terminal equipement, used for non-voice communication between manager and individual devices
Note: HTBMNGR and HTBPHONE must always be added in combination with a DTE, HTBEXT can be configured with or without service DTE.
The devices are configured on the following modules:
•
SLMY
5.
The following terminals can be configured for Telecommuting functionality (TC) :
•
TCLOG: Only Circuit 0 is possible and exclusively used for control messages to TC-Server for the login method "AUTOSET RELOCATE". It cannot be used as deputy for the telecommuter in the Hicom node.
•
TCEXT: TC extension connection.
The devices are configured on the following modules:
•
WAML2
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.