181.2.2 CHANGE SSCSU

The parameter STNO is required for identifying the line to be changed. All other parameters are optional, although at least one of the parameters must be entered. The parameter OPT only has to be entered if OPT-specific parameters are to be changed.

A number cannot be changed to another number if the old number is still entered in the ACD routing table or if it possesses an ACD feature.

STNO-Ranges can be changed into new STNO-Ranges. Then the available station numbers beginning with NEWNO are used.

With parameter OFFTYPE you can manage, whether change of parameters ASYNCT and PSTNO will be loaded to the line card by means of deactivation and activation of the circuit.

The parameters are classified in the following groups:

General parameters:
These parameters are used for all device types:

STNO, NEWNO, COS1, COS2, DPLN, ITR.

Parameters which are either device-specific or valid for only specific devices:

LCOSV1, LCOSV2, LCOSD1, LCOSD2, COSX, PSTNO, SSTNO, PROT, OPTIDX, ALARMNO, SPDI, SPDC1, SPDC2, REP, TRACE, RCBKB, RCBKNA, DSSTNA, DSSTNB, DIGNODIS, HMUSIC, OFFTYPE

Procedure Overview


Command code	Parameter
CHANGE-SSCSU	STNO=<number>,[NEWNO=<number>]
	,[COS1=<number>],[COS2=<number>]
	,[DPLN=<number>],[ITR=<number>]

	\| ,[OPT=HTB]
	,[PSTNO=<key-num>],[LCOSV1=<number],[LCOSV2=<number>]
	,[LCOSD1=<number],[LCOSD2=<number>]
	,[SSTNO=<param>],[COSX=<number>]
	,[SPDI=<number>],[SPDC1=<number>],[SPDC2=<number>]
	,[REP=<number>],[PROT=<param>],[OPTIDX=<number>]
	,[TRACE=<param>],[ALARMNO=<number>]
	,[RCBKB=<param>],[RCBKNA=<param>]
	,[DSSTNA=<param>],[DSSTNB=<param>]
	,[DIGNODIS=<param>],[OFFTYPE=<param>];

	\| ,[OPT=TC]
	,[LCOSV1=<number],[LCOSV2=<number>]
	,[COSX=<number>],[SPDC1=<number>],[SPDC2=<number>]
	,[PROT=<param>],[OPTIDX=<number>]
	,[RCBKB=<param>],[RCBKNA=<param>]
	,[DSSTNA=<param>],[DSSTNB=<param>],[HMUSIC=<number>];

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.