181.2.5
REGENERATE SSCSU
The action REGENERATE outputs the data of a device constellation in the form of one or more position-oriented "ADD" commands for the AMO SSCSU. The system outputs data which are also displayed in the action DISPLAY, TYPE=TERMDATA.
If STNO is missing, "ADD" commands of all SSCSU subscribers of the installation are regenerated.
Procedure Overview
Command code
Parameter
REGENERATE-SSCSU
[STNO=<number>];
Examples
1.
Regenerate the number 2161
Input:
REGEN-SSCSU:2161;
Output:
ADD-SSCSU:2161,HTB,1-6-55-1,HTBPHONE&DTE,
5,6,11,12,21,22,0,0,NO,0,
10,,,,0,SBDSS1,10,YES,0,NO,NO,NO,YES,NO;
AMO-SSCSU-5 SPECIAL SUBSCRIBER CONFIGURATION OF SWITCHING UNIT
REGENERATE COMPLETED;
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.