188.2.3 REGENERATE-TAPRO

This function is used to output a command batch with the following information:
1.
all valid standard key layouts and all loaded key layouts for all stations with digital terminals.
2.
specific standard key layouts.
3.
key layouts loaded at specific stations.
For 1 and 3, the parameters are only output for those terminals whose key function allocation differs from the standard key layout.
Procedure Overview
 
Command Code
Parameter
REGENERATE-TAPRO
[TYPE=ALL]; (1)
 
 
 
|[TYPE=STD],[STD=<number>],[DIGTYP=<param>]; (2)
 
 
 
|[TYPE=STN],[STNO=<number>],[STD=<number>] (3)
 
,[DIGTYP=<param>];
Example
1.
Regenerate standard key layout 0 for Standard Device.
Input:
REGENERATE-TAPRO:TYPE=STD,STD=0,DIGTYP=STDDEV;
Output:
CHANGE-TAPRO:,0,OPTIT8,MB,ST,RLS,FWD,CDK,SNR,CONS,SPKR,,,,,,,,,,,,"8 KEYS I.M. STD 0: ENTRY 8";
CHANGE-TAPRO:,0,OPTIA1,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,,,,,;
CHANGE-TAPRO:,0,OPTIA2,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,,,,,;
CHANGE-TAPRO:,0,OPTIA3,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,,,,,;
CHANGE-TAPRO:,0,OPTIA4,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,VACANT,,,,,;
2.
Regenerate the functions which differ from standard for stations 2190 to 2200.
Input:
REGENERATE-TAPRO:TYPE=STN,STNO=2190&&2200;
Output :
CHANGE-TAPRO:2190,,STDDEV,,,,VACANT,,,,,,DOOR,SPKR,,,,,,,,,;
CHANGE-TAPRO:2191,,STDDEV,MB,ST,SNR,,VACANT,,,,,,,,,,,,,,,;
CHANGE-TAPRO:2193,,STDDEV,,CONS,,,,,,MB,,,,,,,,,,,,;
CHANGE-TAPRO:2193,,OPTIA3,,,,,,,,,,,,SNR,,,,,,,,;
CHANGE-TAPRO:2194,,STDDEV,,CONS,,,,,,MB,,,,,,,,,,,,;
CHANGE-TAPRO:2194,,OPTIA2,,,,,,,,,DR,,,,,,,,,,,;
CHANGE-TAPRO:2194,,OPTIA4,,,,,,,,DOOR,,,,SNR,,,,,,,,;
The key layout is regenerated for all terminals whose station numbers lie within the specified range of 2190 to 2200, regardless of the terminal type, and whose key layout differs from standard.
3.
Regenerate the key layouts which differ from standard for all Standard Device terminals with standard 0.
Input:
REGENERATE-TAPRO:TYPE=STN,STD=0,DIGTYP=STDDEV;
Output:
CHANGE-TAPRO:2191,,STDDEV,MB,ST,SNR,,VACANT,,,,,,,,,,,,,,,;
CHANGE-TAPRO:3500,,OPTIA2,CBK,,,,,,,,,,,,,,,,,,,;
All digital Standard Device terminals with the specified standard key layout, and whose key layout differs from standard, are output according to station number.
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.