191.3 Parameter Description


ENTRY	Table element for names of days (OUTDAYC)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	1	= Monday
			2	= Tuesday
			3	= Wednesday
			4	= Thursday
			5	= Friday
			6	= Saturday
			7	= Sunday

ENTRY	Table element for names of months (OUTMONC)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	1	= January
			2	= February
			3	= March
			4	= April
			5	= May
			6	= June
			7	= July
			8	= August
			9	= September
			10	= October
			11	= November
			12	= December

ENTRY	Table element for the names of the communication services (SERVICE)
	Type of Input	:	Single value, mandatory
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	DTE	= Data terminal equipment
			FAX	= Facsimile
			VOICE	= Voice connection

ENTRY	Table value for transmission speed (SPEED)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	0	= no speed specified
			2400	= 2400 Baud
			4800	= 4800 Baud
			9600	= 9600 Baud
			48000	= 48000 Baud
			64000	= 64000 Baud


ENTRY	Table element for networks (NETTYPE)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	ANA	= Analog network
			IDN	= Integrated Data Network
			ISDN	= Integrated Services Digital Network

ENTRY	Table element for call processing subprocesses. (SWP)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	ENDL	= End of call after limit value
			ENDS	= End of call after seizure
			ENDSEC	= End of call after section
			LAL	= Limit value after limit value
			LAS	= Limit value after seizure
			LASEC	= Limit value after section
			NEXTSEC	= Section after section
			SECACC	= Section after account code
			SECL	= Section after limit value
			SECS	= Section after seizure
			SPACE	= No call processing process

ENTRY	Table element for call types (CHOFCON)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	1	= Local
			2	= Long distance
			3	= Local with limit value exceeded
			4	= Long distance with limit value exceeded
			5	= No entry
			6	= Route optimation

ENTRY	Table element for cost center (SUBSID)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	1	= Operator console
			2	= PBX set
			3	= Night server
			4	= Subscriber
			5	= Service module (for field paying party id only)
			6	= Special charging (for field paying party id only)
			7	= Maintenance equipment (for field paying party id only)
			8	= Public phone via SLMAR to system (for field paying party id only)
			9	= Mobile user
			10	= Number of the other line (keyset)
ENTRY	Table element for faulty data sets (SIGDATA)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	0	= incorrect or double data set
			1	= correct data set

ENTRY	Table element for routing code (ROUTCC)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	0 to 9999

ENTRY	Table element for station CDR - chargees (IDPP)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	ATND	= Attendant console
			MTLC	= PBX tie-line circuit
			STN	= Station
			TC	= CDR per trunk

ENTRY	Table element for station CDR resettable counter delete (UNITERAS)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	Y	= Resettable counter deleted or through connected
			N	= Resettable counter not deleted or not through connected

ENTRY	Table element for station CDR list type (LISTTYPE)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	IND	= Individual call charge calculation
			SUM	= Sum call charge calculation (part calc.)
			TOTAL	= Total call charge calculation

ENTRY	Table element for expensive connections (EXPENS)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	0	= Inexpensive connections
			1	= Expensive connections
			2	= Free of charge A-party
			3	= Free of charge B-party



ENTRY	Table element for type of connection (CONNTYPE)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	INTERN	= Internal connections
			INCO	= Incoming connections
			OUTGO	= Outgoing connections

ENTRY	Table element for supplement services (SUPLSERV)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	0	= Not defined
			1	= Normal call
			2	= Consultation call
			3	= Call transfer
			4	= Call back
			5	= Call fwd busy
			6	= Call fwd unconditional
			7	= Call fwd noreply
			8	= Call pickup
			9	= Conference
			10	= Override
			11	= Hunting group
			12	= Mail box
			13	= Paging
			14	= Dictation
			15	= Credit card charge
			16	= Reverse charging
			17	= Call defection
			18	= Door opening
			19	= Ring back
			20	= Hang up on hold
			21	= Hang up on queueing
			22	= End of queueing
			23	= Begin of queueing
			24	= Master transfer
			25	= Recall
			26	= Intercept
			27	= ZVF
			28	= Not output !!!
			29	= Busy
			30	= Not output !!!
			31	= Attendant activated night service
			32	= Attendant deactivated night service
			33	= Attendant pulled jack
			34	= Attendant reconnected jack
			35	= Attendant console out of order
			36	= Attendant console restarted
			37	= hang up while queued at hunt groups
			38	= Hunt group busy
			39	= Record with swu and adp load
			40	= Call transits a node
			41	= Call rerouting
			42	= Incoming call barred
			43	= Destination party out of service
			44	= Resource unavailable
			45	= Call rejected
			46	= Unassigned number
			47	= Account code
			48	= The paying convener is active in conference
			49	= The paying convener has already left the conference
			50	= A party put on hold
			51	= B party put on hold
			52	= A party back from hold
			53	= B party back from hold
			54	= A party hang up while hold
			55	= B party hang up while hold
			56	= Ringing after connect

ENTRY	Table element for distance zone (ZONE)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	ABR01	= Abroad01
			ABRnn	= Abroadnn
			ABR99	= Abroad99
			CHRGFREE	= Charge free
			CHRGINFO	= Charge info
			DIST01	= Distance01
			DISTnn	= Distancenn
			DIST50	= Distance50
			INC01	= Incoming01
			INCnn	= Incomingnn
			INC09	= Incoming09
			INT01	= Internal01
			INTnn	= Internalnn
			INT09	= Internal09
			LOC	= Local
			NEAR	= Nearby
			SPACE	= Space
			TIE01	= Tie01
			TIEnn	= Tienn
			TIE09	= Tie09

ENTRY	Table element for communication network (CARRIER)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	0	= CARRIER_0 (intern)
			1	= CARRIER_1
			2	= CARRIER_2
			3	= CARRIER_3
			4	= CARRIER_4
			5	= CARRIER_5
			6	= CARRIER_6
			7	= CARRIER_7
			8	= CARRIER_8
			9	= CARRIER_9

ENTRY	Table element for class of pin (COPIN)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	0	= No valid class of PIN
			1	= Manual PIN for mobile user
			2	= Business PIN for long service
			3	= Business PIN for 1 call service
			4	= Private PIN for 1 call service
			5	= Project code for 1 call
			6	= ID card for mobile user
			7	= Switchover code
			8	= PIN for service ID
			9	= CDR account code
			10	= PIN for dialing pattern check for 1 call
	Meaning of values see AMO-PERSI

ENTRY	Through connect / no through connect (UNANS)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	NTHRCONN	= No through connect
			THRCONN	= Through connect

ENTRY	Flag if RURAL / no RURAL connection (RURAL)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	0	= RURAL connection
			1	= No RURAL connection

ENTRY	Type of advice of charge (AOCTYPE)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	0	= Advice of charges - during the call (D_AOC)
			1	= Advice of charges - at end of call (E_AOC)
			2	= Advice of charges - during call setup (S_AOC)

ENTRY	Applied type of billing (CALCTYPE)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	CLOCK	= charge pulse metering and sending, coinbox (RURAL)
			PULSES	= Units / amounts from carrier (CENTRAL OFFICE)
			WOUT	= Costs per time unit

ENTRY	Type of information (INFOTYPE)
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	AMOUNT	= Amounts from carrier (CENTRAL OFFICE)
			UNITS	= Units from carrier (CENTRAL OFFICE)

NAME	ASCII name for entries into the following tables :
	max. 10 chars		- Type of advice of charge (AOCTYPE)
	max. 10 chars		- Applied type of billing (CALCTYPE)
	max. 10 chars		- Communication network (CARRIER)
	max. 10 chars		- Connection types	(CHOFCON)
	max. 10 chars		- Type of connections (CONNTYPE)
	max. 10 chars		- Class of pin (COPIN)
	max. 10 chars		- Expensive connections (EXPENS)
	max. 10 chars		- Station CDR chargees (IDPP)
	max. 10 chars		- Type of information (INFOTYPE)
	max. 10 chars		- Station CDR list type (LISTTYPE)
	max. 10 chars		- Networks	(NETTYPE)
	max. 10 chars		- Day names (OUTDAYC)
	max. 9 chars		- Month names	(OUTMONC)
	max. 10 chars		- Routing codes	(ROUTCC)
	max. 10 chars		- RURAL / no RURAL connection (RURAL)
	max. 10 chars		- Communication services (SERVICE)
	max. 10 chars		- Inaccurate data records (SIGDATA)
	max. 10 chars		- Transmission rates (SPEED)
	max. 10 chars		- Paying party (chargee) (SUBSID)
	max. 10 chars		- Supplement services (SUPLSERV)
	max. 10 chars		- Partial switching processes (SWP)
	max. 10 chars		- Through connect / no through connect (UNANS)
	max. 22 chars		- Station CDR resettable counter delete (UNITERAS)
	max. 10 chars		- Distance zone (ZONE)
	Type of Input	:	Single value,mandatory
	Possible Values	:	max. 22 chars
			If a special character, e.g. ’; ! ? $ - & : ,’ ,
			occurs in the string, then the entire string
			must be enclosed in " ".




















TBL	Designation of table
	Type of Input	:	Single value
			mandatory (ADD)
			optional (DELETE, DISPLAY, REGENERATE)
	Possible Values	:	AOCTYPE	= Type of advice of charge
			CALCTYPE	= Applied type of billing
			CARRIER	= Communication network
			CHOFCON	= Call type
			CONNTYPE	= Type of connections
			COPIN	= Class of pin
			EXPENS	= Expensive connections
			IDPP	= Station CDR paying party
			INFOTYPE	= Type of information
			LISTTYPE	= Station CDR list type
			NETTYPE	= Networks
			OUTDAYC	= Name of day
			OUTMONC	= Name of month
			ROUTCC	= Routingcodes
			RURAL	= RURAL connection / no RURAL connection
			SERVIC	= Communication service
			SIGDATA	= incorrect data set
			SPEED	= Transmission speed
			SUBSID	= Paying party (chargee)
			SUPLSERV	= Supplement services
			SWP	= Call processing subprocesses
			UNANS	= Through connect / no trough connect
			UNITERAS	= Station CDR delete
			ZONE	= Distance zone

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.