195.3.2 Functional Overview

The following functions are implemented in the AMO:
a)
Storing the trace buffer in a file and store or restore tracer selection tables in or from a file with the command COPY
see Section 195.4.2.5, “Displaying and Storing of Trace-Data (DISPLAY, DA, DB, DF, DL, DN, COPY)”
b)
Assignment of a file to the output by command DISPLAY
see Section 195.4.2.5, “Displaying and Storing of Trace-Data (DISPLAY, DA, DB, DF, DL, DN, COPY)”
c)
Output of trace objects with DA, DB, DF, DL and DN
Output of trace objects without time stamps with DA-T, DB-T, DF-T, DL-T and DN-T
see Section 195.4.2.5, “Displaying and Storing of Trace-Data (DISPLAY, DA, DB, DF, DL, DN, COPY)”
d)
Termination of the AMO with END
e)
Important: The tracer itself remains unaffected !
f)
Definition of the maximum number of trace objects which are to be entered in the buffer, with MAXNO
g)
Definition of the maximum entry length for messages entered in the buffer, with MSGLEN (message length)
see Section 195.4.2.3, “MSGLEN”
h)
Activation of the tracer with ON
see Section 195.4.2.4, “Activation and Deactivation of the Tracer (ON, OFF)”
i)
Deactivation of the tracer with OFF
see Section 195.4.2.4, “Activation and Deactivation of the Tracer (ON, OFF)”
j)
Change the processor, which controls the Tracer with P (processor)
k)
Resetting a trace buffer, the trace buffer pool and selection tables with RES (RESet)
l)
Definition of the restart stability of the tracer with RST
m)
Selection of messages or LAN objects with SELMSG (select message)
see Section 195.4.2.2, “SELMSG”
n)
Selection of the serialization mechanism for the tracer with the command SELSTOP (stop selection in the event of a conflict)
o)
Selection of the LAN object types with SETLAN
see Section 195.5.1, “Activating of a LAN Tracepoint”
p)
Output of the tracer status with STA (STAtus)
see Section 195.4.2.6, “Displaying the Status of the Tracer (STA)”
q)
Input of an advisory for other users of the tracer with command USER
In general the Hicom-tracer is not used by just one user. Therefore it is sometimes difficult to check who made the possibly existing tracer-settings and to check if they are still needed.
For assigning the tracer-settings to an user the user can enter any comment (e.g. name, telephone number,...). This comment will be displayed in connection with middle and long status displays (STA,M; or STA,L;).
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.