196.3.2 Functional Overview

The following functions are implemented in the AMO:
a)
Activation / Deactivation of AutoTracer, storing an AutoTracer file with the command
AUTOTR
b)
Storing a trace buffer of a specified tracer in a file and store or restore tracer selection tables in or from a file with the command COPY
see Section 196.4.2.6, “Displaying Trace-Data (DISPLAY, DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T)”
c)
Assignment of a file to the output with command DISPLAY
see Section 196.4.2.6, “Displaying Trace-Data (DISPLAY, DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T)”
d)
Output of trace objects with DA, DB, DF, DL and DN or with DA-T, DB-T, DF-T, DL-T and DN-T (output without time stamps)
see Section 196.4.2.6, “Displaying Trace-Data (DISPLAY, DA, DB, DF, DL, DN, DA-T, DB-T, DF-T, DL-T, DN-T)”
e)
Termination of the AMO with END.
Important: The tracer itself remains unaffected !
f)
Activation / Deactivation and definiton of the Flagtrace selections with FLAGTR
see Section 196.4.2.3, “FlagTracer (FLAGTR)”
g)
Definition of the maximum number of trace objects which are to be entered in the buffer, with MAXNO.
h)
Definition of the maximum entry length for messages entered in the buffer, with MSGLEN (message length)
see Section 196.4.2.4, “MSGLEN”
i)
Definition of selections for a netwide trace-stop with the command NETSTOP.
j)
Deactivation of the StandardTracer with OFF
see Section 196.4.2.5, “Activation and Deactivation of the StandardTracer (ON, OFF)”
k)
Activation of the StandardTracer, determination of poolsize and tracing to hard disk with command ON
see Section 196.4.2.5, “Activation and Deactivation of the StandardTracer (ON, OFF)”
l)
Change the processor, which controls the Tracer with command P (processor)
m)
Activation / Deactivation and definition of selections for RDSTracer with the command
RDSTR
n)
Resetting a trace buffer, the trace buffer pool and selection tables with RES (RESet)
o)
Definition of the restart stability of the tracer with RST
p)
Selection of dynamic device memories by means of the command SELDYN (SELect DYNamic memory)
see Section 196.4.2.2, “Selection of dynamic memory (SELDYN)”
q)
Selection of messages or LAN objects with SELMSG (select message)
see Section 196.4.2.1, “SELMSG”
r)
Selection of the serialization mechanism for the tracer with the command SELSTOP (stop selection in the event of a conflict)
s)
Selection of the LAN object types with SETLAN
see Section 196.6.1, “Activating of a LAN Tracepoint”
t)
Output of the tracer status with STA (STAtus)
see Section 196.4.2.7, “Save the Trace data (COPY)”
u)
Megatrace with MAXBLKFL
see Section 196.4.2.11, “Megatrace”
v)
Input of an advisory for other users of the tracer with command USER
In general the Hicom-tracer is not used by just one user. Therefore it is sometimes difficult to check who made the possibly existing tracer-settings and to check if they are still needed.
For assigning the tracer-settings to an user the user can enter any comment (e.g. name, telephone number,...). This comment will be displayed in connection with status displays (STA,...;).
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.