196.4.2 INPUT-TRACS

The action INPUT-TRACS is only used for WRITE-READ access and cannot be entered by the user at the administration and maintenance terminal (AMT). Only the text shown below is displayed at the AMT as an input request to the user (the asterisk which follows the text indicates the ready state):

TRACER INPUT IN <processor name> PLEASE:
*

This output text also indicates that the AMO has successfully executed the previous command.

The following commands (CMD) are defined:


CMD=	AUTOTR, AUTOTR=OFF;
CMD=	AUTOTR, AUTOTR=ON;
CMD=	AUTOTR, AUTOTR=FILE, [MAXBLOCK=<number>], ARCHIVE=<string>;
CMD=	COPY,AREA=<string>,FILE=<string>;
CMD=	DISPLAY,FILETYPE=<param>;
CMD=	DISPLAY,FILETYPE=FILE,FILE=<string>;
CMD=	DA,[CNT=<number>],[LEN=<number>],TYPE=ALL;
	(Subsequent parameters are disregarded by AMO)
CMD=	DA,[CNT=<number>],[LEN=<number>],[TYPE=<param>],,,TEST=SELMSG;
	(Other parameters are disregarded by AMO)
CMD=	DA,[CNT=<number>],[LEN=<number>],[TYPE=<param>]
	,[DISPLACE=<param>,VAL=<hex>,TEST=<param>];
CMD=	DB,[CNT=<number>],[LEN=<number>],TYPE=ALL;
	(Subsequent parameters are disregarded by AMO)
CMD=	DB,[CNT=<number>],[LEN=<number>],[TYPE=<param>],,,TEST=SELMSG;
	(Other parameters are disregarded by AMO)
CMD=	DB,[CNT=<number>],[LEN=<number>],[TYPE=<param>]
	,[DISPLACE=<param>,VAL=<hex>,TEST=<param>];
CMD=	DF,[CNT=<number>],[LEN=<number>],TYPE=ALL;
	(Subsequent parameters are disregarded by AMO)
CMD=	DF,[CNT=<number>],[LEN=<number>],[TYPE=<param>],,,TEST=SELMSG;
	(Other parameters are disregarded by AMO)
CMD=	DF,[CNT=<number>],[LEN=<number>],[TYPE=<param>]
	,[DISPLACE=<param>,VAL=<hex>,TEST=<param>];
CMD=	DL,[CNT=<number>],[LEN=<number>],TYPE=ALL;
	(Subsequent parameters are disregarded by AMO)
CMD=	DL,[CNT=<number>],[LEN=<number>],[TYPE=<param>],,,TEST=SELMSG;
	(Other parameters are disregarded by AMO)
CMD=	DL,[CNT=<number>],[LEN=<number>],[TYPE=<param>]
	,[DISPLACE=<param>,VAL=<hex>,TEST=<param>];
CMD=	DN,NO=<number>,[LEN=<number>],TYPE=ALL;
	(Subsequent parameters are disregarded by AMO)
CMD=	DN,NO=<number>,[LEN=<number>],[TYPE=<param>],,,TEST=SELMSG;
	(Other parameters are disregarded by AMO)
CMD=	DN,NO=<number>,[LEN=<number>],[TYPE=<param>]
	,[DISPLACE=<param>,VAL=<hex>,TEST=<param>];
CMD=	DA-T, DB-T, DF-T, DL-T, DN-T with the same branches like DA,DB,DF,DL,DN
CMD=	END;
CMD=	FLAGTR, FLAGTR=ADD \| DEL, SELADR=CIR, LTU=<number>, SLOT=<number>
	,CCT=<number>, [SU=<number>], [DI=<number>];
CMD=	FLAGTR, FLAGTR=ADD \| DEL, SELADR=LN, LN=<number>;
CMD=	FLAGTR, FLAGTR=ADD \| DEL, SELADR=STNO, STNO=<number>, SVC=<param>;
CMD=	FLAGTR, FLAGTR=OFF;
CMD=	FLAGTR, FLAGTR=ON;
CMD=	FLAGTR, FLAGTR=STOPALL;
CMD=	FLAGTR, FLAGTR=FILE, MAXBLOCK=<number>, ARCHIVE=<string>;
CMD=	MAXNO,[MAXNO=<number>];
CMD=	MSGLEN,TRACEPT=<param>,CONDGRP=<param>,[LEN=<number>];
CMD=	NETSTOP,NETPROT=CORNET,SELLINE=L1\|...\|L8,[NODEACC=<number>];
CMD=	NETSTOP,NETPROT=CORNET,SELLINE=OFF;
CMD=	OFF;
CMD=	ON,[STYPE=BUF];
CMD=	ON,STYPE=HD,FILE=<string>,[MAXBLOCK=<number>],[WRAP=<param>],
	[OVERWRT=<param>],[POOLSIZE=<number>];
CMD=	P,UNIT=<param>;
CMD=	RDSTR, RDSTR=ADD, SELADR=CIR, LTU=<number>, SLOT=<number>
	,CCT=<number>, [SU=<number>], [DI=<number>];
CMD=	RDSTR, RDSTR=ADD, SELADR=LN, LN=<number>;
CMD=	RDSTR, RDSTR=ADD, SELADR=STNO, STNO=<number>, SVC=<param>;
CMD=	RDSTR, RDSTR=DEL, UNIT=<string>;
CMD=	RDSTR, RDSTR=OFF;
CMD=	RDSTR, RDSTR=ON;
CMD=	RDSTR, RDSTR=HD, FILE=<string>, [MAXBLOCK=<number>],[WRAP=<param>],
	[OVERWRT=<param>], [POOLSIZE=<number>];
CMD=	RES,[RESOBJ=<param>];
CMD=	RST,STYPE=<param>;
CMD=	SELDYN,CPPNT=<param>,[CONDGRP=OFF];
CMD=	SELDYN,CPPNT=<param>,CONDGRP=G1\|...\|G4,[CPCOND=<param>];
CMD=	SELDYN,CPPNT=GATE,PHYSEL=<hex>,COND=<param>,[CPCOND=<param>]
	,SELADR=CIR,LTU=<number>,SLOT=<number>,CCT=<number>
	,[SU=<number>],[DI=<number>];
CMD=	SELDYN,CPPNT=GATE,PHYSEL=<hex>,COND=<param>,[CPCOND=<param>]
	,SELADR=LN,LN=<number>,[SU=<number>],[DI=<number>]
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=ALL;
	(Subsequent parameters are disregarded by AMO)
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CD1\|...\|CD8
	,FLDTYPE=BYTE,DISPLACE=<number>,VAL=<hex>,[TEST=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CD1\|...\|CD8
	,FLDTYPE=DEST,VAL=<hex>,[TEST=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CD1\|...\|CD8
	,FLDTYPE=EV,VAL=<hex>,[TEST=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CD1\|...\|CD8
	,FLDTYPE=PST,DISPLACE=<number>,BITPOS=<param>,[TEST=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CD1\|...\|CD8
	,FLDTYPE=SRC,VAL=<hex>,[TEST=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CD1\|...\|CD8
	,FLDTYPE=SEVT,VAL=<hex>,[TEST=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CD1\|...\|CD8
	,FLDTYPE=SU,VAL=<hex>,[TEST=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CD1\|...\|CD8
	,FLDTYPE=SDNO,DISPLACE=<number>,VAL=<hex>,[TEST=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CCD1\|...\|CCD8
	,STYPE=ADD\|SET\|SUB,AKTPOS=<number>,TARGETPO=<number>
	,[TARGETTP=<param>],[TARGETGRP=G1\|...\|G4],[TARGETCD=CD1\|...\|CD8]
	,[LOCK=<param>],[NUMCD=<param>],[CONVERT=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,COND=CCD1\|...\|CCD8
	,STYPE=DEL,[TARGETTP=<param>],[TARGETGRP=G1\|...\|G4]
	,[TARGETCD=CD1\|...\|CD8],[LOCK=<param>],[NUMCD=<param>];
CMD=	SELMSG,TRACEPT=<param>,CONDGRP=G1\|...\|G4,[COND=OFF];
	(Subsequent parameters are disregarded by AMO)
CMD=	SELMSG,TRACEPT=<param>,[CONDGRP=OFF];
	(Subsequent parameters are disregarded by AMO)
CMD=	SELSTOP,STYPE=<param>;
CMD=	SETLAN,CONDGRP=G1\|...\|G4,TYPE=<param>;
CMD=	STA,[INFO=<param>];
CMD=	USER,[TEXT=<string>];


old commands	new commands
STA,F;	STA,FLAGTR;
SELFLAG, STYPE=<param>, SELADR=CIR, LTU=<number>,SLOT=<number>,CCT=<number>, [SU=<number>], [DI=<number>];	FLAGTR, STYPE=<param>, SELADR=CIR, LTU=<number>,SLOT=<number>,CCT=<number>, [SU=<number>], [DI=<number>];
SELFLAG, STYPE=<param>, SELADR=LN, LN=<number>;	FLAGTR, STYPE=<param>, SELADR=LN, LN=<number>;
SELFLAG, STYPE=<param>, SELADR=STNO, STNO=<number>, SVC=<param>;	FLAGTR, STYPE=<param>, SELADR=STNO, STNO=<number>, SVC=<param>;
SELFLAG, STYPE=OFF;	FLAGTR, STYPE=OFF;
SELFLAG, STYPE=ON;	FLAGTR, STYPE=ON;
SELFLAG, STYPE=STOPALL;	FLAGTR, STYPE=STOPALL;
	FLAGTR, STYPE=FILE, MAXBLOCK=<number>, ARCHIVE=<string>;
SELNET,NETPROT=CORNET,SELLINE=L1\|...\|L8, [NODEACC=<number>];	NETSTOP,NETPROT=CORNET,SELLINE=L1\|...\|L8,[NODEACC=<number>];
SELNET,NETPROT=CORNET,SELLINE=OFF;	NETSTOP,NETPROT=CORNET,SELLINE=OFF;

Before the StandardTracer is started a selection of the tracepoints and traceobjects, which shall be recorded, has to be made. This is done with the commands SELMSG and SELDYN.

Note: Flagtrace and Autotrace are activated and standard-selections are set as default.

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.