196.4.2.4 MSGLEN

The messages which have to be recorded might be very long and most of the times only the first part of it is of interest for the user. Therefore it is useful (especially with high data traffic) to determine a maximum length of the recorded messages with the command MSGLEN in order to prevent a possible loss of data.

This command just makes sense in connection with a SELMSG-input. The default value is 16, which is also used if this command is not executed.

Example


’SELMSG,OS,G1,ALL;’	the first 20 Bytes of all OS-messages are
’MSGLEN,OS,G1,20;’	recorded

For AutoTracer the default value is 48 bytes. Another length (e.g. 64 bytes) can be selected with

MSGLEN,AUTOTR,G1,64;

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.