196.9.2 Advisories

 
H01:
NO FURTHER OBJECT IS IN THE BUFFER
H02:
PROCEEDING FROM THE DESIRED START THERE ARE ONLY <xxxxx> ENTRIES
H03:
AMO TRACA NOT AVAILABLE ON A MONOPROCESSOR SYSTEM,
USE AMO TRACS
H04:
THIS SELECTION OCCUPIES CONDITIONS <xx> AND <xx>
H05:
IN THIS CONTEXT THE VALUE MEANS THE ABSENCE OF A LIMIT
H06:
DESIRED FUNCTION NOT AVAILABLE
H07:
THE NUMBER OF (CYCLICALLY) ENTERED OBJECTS IS UNLIMITED NOW
H08:
TRACEBUFFER IS EMPTY
H09:
OBJECT COULD NOT BE OUPUT COMPLETELY
H10:
TRACEPOINTS SET: <xx> <xx> <xx>
H11:
TRACEPOINTS POSSIBLE AT MOST: CP DH PP
H12:
LENGTH HAS BEEN REDUCED TO ITS ALLOWED MAXIMUM
H13:
NO GROUPS FOR POSTSELECTION. INPUT INSIGNIFICANT
H14:
NOT EXECUTED FOR TPT @@, NO SELECTION DEFINED FOR G@
H15:
WRITING OF TRACE BUFFER COMPLETED
H17:
FILE ALREADY EXISTS. OVERWRITE? (Y/N)
H18:
TRACE BUFFER NOT EMPTY. OVERWRITE? (Y/N)
H19:
’<xxxxxxxxxxxxxxxxxxx>’ WITH <xxxxxx> KB CREATED
H20:
NUMBER EXISTS IN BLOCKS <xxx> <xxx> <xxx> <xxx> <xxx> <xxx>
H23:
WRITING TRACER SELECTION TABLES FINISHED
H24:
READING TRACER SELECTION TABLES FINISHED
H26:
IRREGULAR INPUT
H27:
DEFAULT FLAGTRACE SELECTIONS SET
H29:
A NEW FLAGTRACE MESSAGE IN TRACE BUFFER RECORDED
 
THE OUTPUT OF TRACE FILE INTERRUPTED
H30:
READ BUFFER DOES NOT EXIST
H31:
TRACE BUFFER POOL WITH @@@@ KB CREATED
H36:
DEFAULT AUTOTRACER SELECTIONS SET
 
AUTOTRACER IS SWITCHED ON
H37:
TIME IS ALWAYS RECORDED. INPUT IS IGNORED.
H38:
TRACE FILE IS EMPTY
H39:
RELEASE OF BUFFER POOL IS STARTED
H40:
AMO-TRACS IS USED BY ANOTHER USER
 
OR
 
AMO-TRACS WAS ABORTED RESET WITH 'RELOVL;'
H41:
TRACE FILE WITH MORE THAN 99 BLOCKS
 
NO OUTPUT OF TRACE DATA WITH AMO-TRACS POSSIBLE
 
FOR OUTPUT USE "COOL"
H42:
PLEASE WAIT...
H43:
NOT ENOUGH MEMORY FOR A TRACE BUFFER POOL WITH @@@@@ kB. SMALLER BUFFER POOL OR RESIDENT TRACE BUFFERS ARE USED. AT HEAVY LOAD, TRACE DATA CAN BE MISSED IN TRACE FILE.
H44:
TRACEINFO FILE IS FULL. TRACE ACTIVATED, BUT IT WILL NOT BE INCLUDED IN STA,TRFILES AND RDS. REMOVE OLDER TRACEFILES TO RESOLVE THE ISSUE.
H45:
SOME FILES ALREADY EXIST. TRACE WILL NOT BE WRITTEN IN FILES BUT ONLY IN TRACE BUFFER. MEGATRACE IS OFF
H46:
STANDARD TRACER BUFFERS WILL BE RELEASED AND USED FOR AUTOTR (STARTING NOW)
H47:
SOME FILES ALREADY EXIST. OVERWRITE? (Y/N)
H48:
AFTER TWO HOURS STANDARD TRACER BUFFERS WILL BE RELEASED AND USED FOR AUTOTR
H49:
FILE ALREADY EXISTS. TRACE WILL NOT BE WRITTEN IN FILE BUT ONLY IN TRACE BUFFER.
H54:
ONLY THE FIRST AND THE LAST BLOCK ARE DISPLAYED
H55:
@@@ of complex @@@@ in @@@ @@@@@@@@@@@@@@@@@@@@ '@@@'
H56:
WRITING OF DIAGS SWITCHES SELECTION COMPLETED (LOADDISP COMPLEX IS NOT AFFECTED)
H57:
READING OF DIAGS SWITCHES SELECTION COMPLETED (LOADDISP COMPLEX IS NOT AFFECTED)
H58:
RESETTING THE DIAGS SWITCHES COMPLETED (LOADDISP COMPLEX IS NOT AFFECTED)
H59:
ONLY DEFAULT DIRECTORY :DIAG:TRCCONF" IS DISPLAYED"
H60:
DEFAULT DIRECTORY IS :DIAG:TRCCONF""
H61:
TOO MANY SWITCHES TO DISPLAY SWITCHES CAN BE REVIEWED USING COPY,HD-TAB,,NO,LIST" COMMAND"
H62:
ONLY @@@ FILES ARE DISPLAYED
H63:
THERE IS NOT ENOUGH SPACE ON @@@@@@@ FOR ALL @@@ FILES AT THE MOMENT.NUMBER OF FILES WILL BE REDUCED TO @@@.SOME TRACE FILES WILL HAVE BLOCKS REDUCED.
H64:
RESTORING @@@@@@@ FILES ON :DIAG:.
H65:
TRACE IS OFF!
H66:
NO TRACE IS RUNNING
H67:
STOP, STOPALL WITH FLDTYPE STN ALSO USES CD2, CD3 & CD4 CONDITIONS
 
 
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.