197.3.3
CHANGE-TREF
CHANGE is only possible, if a matrix has been loaded into the database before, by means of ACTIVATE. If not, the error message F02 will be displayed.
Procedure Overview
Command Code
Parameter
CHANGE-TREF
[TYPE=TREFTAB,ORIGINAT=<param>,DESTINAT=<param>,TREFVAL=<param>];
OR
[TYPE=TONETAB,TONEGRP=<param>,DESTINAT<param>, TONEVAL=<param>];
Example
1.
Change attenuation value for the connection ANATE to SET600 in the T-Reference point matrix to 0dB
Input:
CHANGE-TREF:TREFTAB,ANATE,SET600,0DB;
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.