197.3.4
DISPLAY-TREF
DISPLAY is only possible, if a matrix has been loaded into the database before, by means of ACTIVATE. If not, the message H01 will be displayed.
Procedure Overview
Command Code
Parameter
DISPLAY-TREF
[TYPE=TREFTAB,ORIGINAT=<param>];
OR
[TYPE=TONETAB,TONEGRP=<param>];
Examples
1.
Display T-Reference point matrix for ANATE
Input:
DISPLAY-TREF:ANATE;
Output:
T-REFERENCE POINT MATRIX
========================
COUNTRY CODE: 0
ORIGINATOR: ANATE
DESTINATION ATTENUATION
------------------------
UNDEFDEV 0DB
ANATE 8DB
SET600 8DB
OPTISET 0DB
DMAU 0DB
TMACO 1DB
TMDCO 4DB
TMA2WINT 2DB
TMA2WEXT 1DB
TMATIE4W 4DB
TMDTIE 4DB
TMDIUCAS 0DB
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.