197.3.5
REGENERATE-TREF
If T-Reference point is activated, the ACTIVATE command will be regenerated. After comparing the T-Reference point and Tone table matrix stored in Database with the one on HD, all differences will be regenerated as CHANGE commands.
Procedure Overview
Command Code
Parameter
REGENERATE-TREF
;
Example
1.
Regenerate T-Reference point matrix
Input:
REG-TREF:;
Output:
ACTIVATE-TREF:0;
CHANGE-TREF:TREFTAB,ANATE,SET600,0DB;
CHANGE-TREF:TONETAB,TONGRP1,SET600,0DB;
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.