198 TSCSU - Configuration of Special Circuits in the SWU


CCR	for CCMs which are to be released after each individual job.
CCM	for CCs with ’Meet Me’ operation (i.e. all CCs which a voice connection directly is possible via the search frame)
CCTN	for CCs and for some CCMs, an audible tone must be awaited after the A-block has been sent
SACK	set for all devices for which seize acknowledgements are sent during preprocessing
RBLK	set for CCs and CCMs which can transmit remote blocking signals as criteria (short pulses in specific intervals on an otherwise open line)(see also parameter SUPV).
LSUP	if this parameter value is not declared, trunk alarm signaling is suppressed (exception: ANS if time is exceeded).
	After the timeout specified in the parameter SUPV, the TCOM returns to idle state.
SDL	set for CCs and CCMs if it is necessary to wait for an audible signal before dialing.
EOD	set for CCM with absence/paging signaling (ESPA signaling, switching of + or - on the line)
DTMF	set for CC and CCM in case of DTMF signaling; if DEV=DICT, DTMF tones are always signaled directly.

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.