198.2.4
DISPLAY-TSCSU
The action DISPLAY-TSCSU performs the following functions:
•
Interrogation of the parameters and parameter values of trunks configured with the AMO TSCSU.
•
Output of available PENs for which a module has been configured with the AMO BCSU (see parameter description for parameter TYPE, TYPE=CFIG).
All parameters are optional. If no parameter is specified, all trunks configured with the AMO TSCSU with their parameters and parameter values are output. If parameters are specified, output is restricted to certain trunks.
If the parameter DEV is specified, only data for the desired device type is output.
Partially qualified input may be given for PEN1 and PEN2, i.e. fewer than four parameter components may be input. Here too, the value entered first is always the LTG number, the value entered second is the LTU number, and the value entered third is the slot. This assures that all trunks of the unit in question are addressed, e.g. by entering two values all trunks of an LTU are addressed.
If PEN1 is specified (even if it is only partially qualified), only those trunks and trunk data identified with PEN1 are output. If PEN1 and PEN2 are specified, all trunks are output which are assigned in the range between PEN1 and PEN2. If only PEN2 is specified all trunks up to PEN2 are output. The output trunks are sorted according to DEV.
FORMAT=L (default value) shows trunk data in table form with up to 4 rows of trunks with the same DEV.
FORMAT=M shows trunk group common data (once per trunk group) and trunk individual data PEN, CCT and INS (one line per trunk) sorted by TRGRP.
FORMAT=S shows a short trunk overview with PEN, DEV and CCT.
Procedure Overview
Command Code
Parameter
DISPLAY-TSCSU
[PEN1=<gg-uu-sss-cc>],[PEN2=<gg-uu-sss-cc>]
,[DEV=<param>],[TYPE=<param>],[TRGRP=<number>]
,[FORMAT=<param>];
Examples
1.
Interrogate all PENs available for DICT devices between PEN1=1-2-001-1 and PEN2=1-2-121-07 for which modules have been assigned by the AMO BCSU.
Input:
DISPLAY-TSCSU:PEN1=1-2-001-1,PEN2=1-2-121-07,DEV=DICT,TYPE=CFIG;
Output:
FREE PENS FOR WHICH A MODULE TO DEVICE DICT HAS BEEN CONFIGURED:
1-2- 13- 2 1-2- 13- 3 1-2- 37- 0 1-2- 37- 1
2.
Interrogate all trunks between PEN1=1-2-001-1 and PEN2=5-4-121-7 assigned by the AMO TSCSU.
Input:
DISPLAY-TSCSU:PEN1=1-2,PEN2=1-4;
Output:
PEN | 1-2- 73- 0 | 1-2-115- 1 | 1-2-115- 2 | 1-2-115- 3 |
--------|--------------|--------------|--------------|--------------|
DEV | DICT | DICT | DICT | DICT |
COTNO | 0 | 0 | 0 | 0 |
DPLN | 0 | 0 | 0 | 0 |
ITR | 0 | 0 | 0 | 0 |
TGRP | 1 | 1 | 1 | 1 |
CCT | | 722 DB 6 | | |
NNO | 0 | 0 | 0 | 0 |
ALARMNO | 0 | 0 | 0 | 0 |
CARRIER | 1 | 1 | 1 | 1 |
ZONE | EMPTY | EMPTY | EMPTY | EMPTY |
INS | Y | Y | Y | Y |
COFIDX | 0 | 0 | 0 | 0 |
COPNO | 0 | 0 | 0 | 0 |
SUPV | SUPV5 | SUPV5 | SUPV3 | SUPV1 |
ACKT | SZACK1 | SZACK1 | SZACK1 | SZACK1 |
DTYPE | 1 | 1 | 1 | 1 |
---------------------------------------------------------------------
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.