201.3.2
ADD-TWABE
Any existing entries will simply be overwritten by the new entries provided this does not give rise to any irregularities. If, for example, the entry LEN=4 is made for STNO=45 and the command "ADD-TWABE:457,6;" entered, LEN=6 will be entered for STNO=457, and LEN=4 (which used to be the entry for STNO=45) will now be entered for the station numbers 450 to 456 and 458 to 459. Advisories will be issued to notify the user of these changes. If, in our example, the old entry were 2, it would be impossible to relocate the entry. The command would be rejected and an error message issued.
Procedure Overview
Command Code
Parameter
ADD-TWABE
STNO=<key-num>,LEN=<number>;
Examples
1.
Assign the call number 457 with combined length 6
Input:
ADD-TWABE:STNO=457,LEN=6;
2.
Assign the station numbers 45 to 48 with combined length 7
Input:
ADD-TWABE:STNO=45&&48,LEN=7;
Output:
H01: OVERWRITING ENTRY FOR STNO 477
H01: OVERWRITING ENTRY FOR STNO 478
H01: OVERWRITING ENTRY FOR STNO 482
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.