202.2.3
DELETE-UCSU
Delete LTG and LTUs
1.
Delete LTG
The associated LTUs and the peripheral modules must be deleted first.
2.
Delete LTU or AP/EntGW shelf
The associated peripheral modules must be deleted first (AMOs BSSU and BCSU).
3.
Delete Overlay configuration
Before deleting the overlay configuration, it must be ensured, that no board of the standard LTU, to which the overlay LTU to be deleted is assigned, uses the highwaybundle "F" (AMO BCSU).
When deleting LTG or LTU the consy data will be checked and an appropriate advisory message will be output if still assigned.
Procedure Overview
Command Code
Parameter
DELETE-UCSU
UNIT=LTU,[LTG=<number>],LTU=<number>;
|UNIT=AP,[LTG=<number>],LTU=<number>;
|UNIT=LTG,LTG=<number>;
|UNIT=ENTGW,[LTG=<number>],LTU=<number>,
Note
For UNIT=LTU parameter LTG is only a single value.
Examples
1.
Delete LTU 2
Input:
DELETE-UCSU:UNIT=LTU,,2;
Output:
LTU 1.2 DELETED
LTU 1.2 NOT DELETED
| |
| +------ LTU no.
+-------- LTG no.
2.
Delete LTU 2 to 4 (LTG 1)
Input:
DELETE-UCSU:UNIT=LTU,LTG=1,LTU=1&&4;
Output:
H10: LTU 1.1 IS ALREADY DELETED
H07: LTU 1.2 DELETED
H07: LTU 1.3 DELETED
F07: LTU 1.4 NOT DELETED (ORDER ERROR)
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.