202.2.5
REGENERATE-UCSU
By means of this order, position-oriented commands for the regeneration of MBU, LTG or LTU data are output.
Procedure Overview
Command Code
Parameter
REGENERATE-UCSU
[UNIT=LTU],[LTG=<number>],[LTU=<number>];
|[UNIT=AP],[LTG=<number>],[LTU=<number>];
[REGDEF=<param>];
|[UNIT=LTG],[LTG=<number>];
|[UNIT=ENTGW],[LTG=<number>],[LTU=<number>];
[REGDEF=<param>];
Note
If parameter LTG is not specified for UNIT=LTG, regenerate commands are created for all LTGs set up. If neither parameter LTU nor parameter LTG is specified for UNIT=LTU, regenerate commands are created for all LTUs set up.
Example
Regenerate all
REGENERATE-UCSU;
Output:
REGENERATE-UCSU;
H500: AMO UCSU STARTED
ADD-UCSU:LTG,1,"Q2261-X ";
ADD-UCSU:LTU,1,1,"Q2261-X ",CC80F,LOCAL,," ",,,,,,;
ADD-UCSU:LTU,1,2,"Q2166-X ",L80XF,LOCAL,," ",,,,,,;
ADD-UCSU:LTU,1,3,"Q2166-X ",L80XF,LOCAL,," ",,,,,,;
ADD-UCSU:LTU,1,4,"Q2166-X ",L80XF,LOCAL,," ",,,,,,;
ADD-UCSU:AP,1,20,"Q2324-X10 ",45,AP37009,APNW,167.123.111.12,123.0.111.12,234,"MOOSLACKENGASSE ",,,NO,120,NO,0,0;
ADD-UCSU:ENTGW,1,68,"Q2347-X",1,AP370013, APDL, 167.123.111.13, 123.0.111.13,005, " MOOSLACKENGASSE",,,YES,1,YES,0,0,IPV4,NO,NO,"1","0","0",,,"0",HSRTCP;
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.