202.3 Parameter Description


ALARMNO	Alarm number
	Type of Input	:	Single value, optional (ADD, CHANGE)
	Possible Values	:	0, 8 to 519
	Default Value	:	0

APDATA	AP Data
	Type of Input	:	Single value, optional (DISPLAY)
	Possible Values	:	GEN	General Data
			TONES	Tone Table

APRTADDR	AP gateway IP address (i.e 20.1.2.129)
	Type of Input	:	1 to 4 single values, concatenated with "."
			optional (ADD, CHANGE)
	Possible Values	:	0 to 255

BCHLCNT	Amount of b-channels on NCUI board
	Type of Input	:	single value, optional (ADD, CHANGE)
	Possible Values	:	1 - 30
	Default Value	:	30

CNTRYCD	Loadware variant for SLMA2 / SLMAR
	Type of Input	:	Single value, optional (ADD, CHANGE)
	Possible Values	:	0	Germany (DB-Initialization)
			1	Austria
			10	Hungary
			11	India
			12	Oman
			13	GUS (Russia, Ukraine, Belorussia,Georgia
			14	Cameroon
			15	Israel
			16	South Korea
			17	Turkey
			18	Japan
			19	Vietnam
			2	Switzerland
			20	Kenya
			21	Zimbabwe
			23	Algeria
			24	Nigeria
			25	Congo
			26	Ethiopia
			27	Burundi
			28	Pakistan
			29	Yugoslavia
			3	Belgium
			4	Australia
			5	Spain
			6	Republic South Africa
			7	Great Britain, Ireland
			8	Finland
			9	Portugal
			A	France
			B	Netherlands
			C	China, Tanzania
			D	Italy
			E	Malaysia
			F	Poland
			G	Mexico
			H	Denmark
			I	Argentina
			J	Czech Republic
			K	USA
			L	Luxembourg
			M	Singapore
			N	Indonisia
			O	Thailand
			P	Philippines
			Q	Brazil
			R	Greece
			S	Hongkong
			T	Morocco
			U	Sweden
			V	DSN - A-law coding
			W	DSN - U-law coding

CONNTYPE	Connection type of the LTU shelf
	Type of Input	:	Single value, optional (ADD, CHANGE)
	Possible Values	:	LOCAL	local LTU
			FLEX	via Fiber Link connected LTU
			APDL	AP shelf via IP - direct linked
			APNW	AP shelf via IP - network
	Default Value	:	LOCAL	only for HHS shelves

CONVLAW	Convertion from A-Law to Mu-Law on NCUIx board (in advance)
	Type of Input	:	single value, optional (ADD, CHANGE)
	Possible Values	:	YES, NO
	Default Value	:	YES

CP	Call processing tone
	Type of Input	:	Single value, optional (ADD, CHANGE)
	Possible Values	:	ALERT	Notification/alert tone
			ANNICPT	Announcement for attendant intercept
			BONHK	B-party on hook (for US only)
			BRKMSGWT	Broken dial tone when message waiting
			BUSY	Busy tone
			CAMP	Camp-on tone
			CAMPBRK	Ringback tone when camped on
			CBKALERT	Callback alert tone
			CCMABSEN	CCM tracer in rack
			CMALTONE	Call monitoring alerting tone
			CONFDISC	Conference disconnect tone
			CONFTN	Conference tone
			CONG	Congestion tone
			DATA	Data tone
			DISCTONE	Disconnect tone
			DND	Do not disturb tone
			EXTDTN	External Dial tone
			EXTDTN2	Secondary co dial tone
			FCAMP	first camp-on tone
			FRNGBK	First burst of ringback tone
			HOLD	Hold tone
			HOLDCCS	Hold tone code calling system (ccs)
			HOLDEXT	Hold tone external
			HOLDH1	Hold tone hold 1
			HOLDH2	Hold tone hold 2
			HOLDHUNT	Hold tone hunting-group
			HOLDINT	Hold tone internal
			HOLDLINE	Hold the line please
			HOWLTONE	Howltone after busytone timeout
			HUNTGRUP	Announcement huntgroup queue
			IMPOSSFM	Impossible for the moment
			INTDTN	Internal dial tone
			KNCONF	Camp-on tone for conference
			LCRET	LCR Expensive route tone
			LOCANN	Local announcement
			MOH	Music on hold
			MWI	Message waiting indication
			NACK	Negative acknowledgement tone
			NODIAL	Timeout tone if digits not dialed
			NOPO	Not possible
			NOTALWD	Not allowed
			NOTREACH	Not reachable
			NU	Number unobtainable tone
			OFFHKTRQ	Off hook trunk queueing
			OVR	Automatic override tone
			OVRTN	Override tone
			OVRWARN	Override warning tone
			PACK	Positive acknowledgement tone
			PACKWD	Positive acknowledge tone with dialing
			POSTDIAL	Announcement post dial
			RECDIALT	Recall dial tone
			REORDER	Reorder tone (includes BONHK-Tone outside US)
			REQDIALT	Request Dial Tone
			RNGBK	Ringback tone
			ROUTTONE	SCNF France: Connect routing tone
			RTCHKNTF	LCR route check not finished
			RTOTON1	Test for first tone receiver group
			RTOTON2	Test for second tone receiver group
			SECDIALT	Second Dial Tone
			SPEC	Special Dial Tone
			TEST	Test tone
			VOICEMAL	Voice mail
			ZIPTONE	Alerttone for acd-g automatic connection

DHCPV4	DHCP version 4
	Type of Input	:	single value, optional (ADD)
	Possible Values	:	YES, NO

DHCPV6	DHCP version 6
	Type of Input	:	single value, optional (ADD)
	Possible Values	:	YES, NO

DTR	Selection of country-specific dial tone receiver table
	Type of Input	:	Single value, optional (ADD, CHANGE)
	Possible Values	:	0	Germany (DB-Initialization)
			1	Austria
			10	Hungary
			12	Oman
			13	GUS
			14	Cameroon
			15	Israel
			16	South Korea
			17	Turkey
			18	Japan
			19	Vietnam
			2	Switzerland
			20	Kenya
			21	Zimbabwe
			23	Algeria
			24	Nigeria
			25	Congo
			26	Ethiopia
			27	Burundi
			28	Pakistan
			29	Yugoslavia
			3	Belgium
			4	Australia
			5	Spain
			6	South Africa
			7	Great Britain, Ireland
			8	Finland
			9	Portugal, Brazil
			A	France
			B	Netherlands
			C	China, Tanzania
			D	Italy
			E	Malaysia
			F	Poland
			G	Mexico
			H	Denmark
			J	Czech Republic
			K	USA
			M	Singapore
			N	Indonisia
			O	Thailand
			P	Philippines
			Q	Brazil
			R	Greece
			S	Hongkong
			T	Morocco
			U	Sweden

FAX	Fax number at the shelf location
	Type of Input	:	up to 22 digits, optional (ADD, CHANGE)
	Possible Values	:	0 - 9, *, #, A - D, up to 22 characters

ENTGW	LOCAL SYSTEM SHELF
	Type of Input		single value, optional

FRMTYPE	Type of LTU frame
	Type of Input	:	Single value, mandatory (ADD, CHANGE)
	Possible Values	:	AP370013	SAPP frame for 600cpci shelves
			AP37009	SAPP frame for ENTGW shelves
			INCH19	19 inch frame for AP shelves
			L80XF	for 600cpci and AP shelves
			LTUW	frame for 600ecx and AP shelves
			SOCOAP	Virtual AP37009 frame for softgate AP shelves

IPMODE	IP Mode
	Type of Input	:	single value, optional (ADD)
	Possible Values	:	DUALSTCK	IP version 4 and IP version 6
			IPV4	IP version 4

LANGID	LANGUAGE ID FOR OPTISET
	Type of Input	:	1 to 5 single values, concatenated with &, optional
	Possible Values	:	DUTCH	dutch
			ENGLISH	english
			FRENCH	french
			GERMAN	german
			GREEK	greek
			ITALIAN	italian
			PICTO	pictogram
			PORTUG	portuguese
			RES1	Reserve 1
			RES2	Reserve 2
			RES3	Reserve 3
			RES4	Reserve 4
			RES5	Reserve 5
			RES6	Reserve 6
			SPANISCH	spanish

LOCATION	postal adress of the LTU shelf
	Type of Input	:	Single value, optional (ADD, CHANGE - UNIT = LTU)
		:	Single value, mandatory (ADD, CHANGE - UNIT = AP)
	Possible Values	:	Text string with max. 45 alphanumerical characters
	Default Value	:	45 blanks

LOCID	Location ID of LTU
	Type of Input	:	Single value, optional (ADD, CHANGE - UNIT = LTU)
		:	Single value, mandatory (ADD, CHANGE - UNIT = AP)
	Possible Values	:	0 - 999

LSRTADDR	IP address (i.e 198.16.16.78) of primary signalling router for NCUI board
	Type of Input	:	1 to 4 single values, concatenated with "."
		:	optional (ADD, CHANGE)
	Possible Values	:	0 to 255

LTG	Specification of the LTG
	Type of Input	:	Single value, optional
			Single value or area, optional (DISPLAY, REGENERATE)
			mandatory (ADD, DELETE)
	Possible Values	:	1 - 1
	Default Value	:	1

LTPARTNO	Partnumber of adding LTUC module.
	Type of Input	:	Single value, optional (ADD, CHANGE)
	Possible Values	:	Text string with max. 10 alphanumerical characters

LTU	Specification of the LTU in an LTG. The LTU shelves (module frames for line units) are numbered consecutively in the cabinet from top to bottom.
	Type of Input	:	Single value or area, optional (DISPLAY, REGENERATE)
			mandatory (ADD, DELETE)
	Possible Values	:	1 to LTU number max for UNIT = LTU
		:	17 to 99 for UNIT = AP (gap between LTU number max and 17 depends on the HW platform)

PHONE	Phone number at the shelf location
	Type of Input	:	up to 22 digits, optional (ADD, CHANGE)
	Possible Values	:	0 - 9, *, #, A - D, max 22 characters

PLCHECK	check payload quality matrix
	Type of Input	:	single value, optional (ADD, CHANGE)
	Possible Values	:	YES, NO
	Default Value	:	YES

REGDEF	regenerate also default values of tone table
	Type of Input	:	single value, optional (REG)
	Possible Values	:	YES, NO
	Default Value	:	NO

SRCGRP	SOURCE GROUP INDEX
	Type of Input		single value, mandatory
	Possible Values		numeric, 1-255

SIGMODE	signaling mode
	Type of Input	:	single value, optional
	Possible Values	:	HSRTCP	HSR over TCP
			HSRUDP	HSR over UDP

SIPARTNO	Specification of the central SIU module for each LTG
	Type of Input	:	single value, mandatory (ADD)
	Possible Values	:	text, up to 10 characters

SIU	Assigned siu tones. Countryspecific meanings are listed in Service Handbook in country chapters.
	Type of Input	:	single value, optional (ADD, CHANGE)
	Possible Values	:	numeric, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26

SIUANN	Set options for SIU announcement texts (no AC). Enter loadware variant into DB. (Reload of SIU data for AP shelves by means of EXEC-USSU:NCUILOAD;)
	Type of Input	:	single value, optional (ADD, CHANGE)
	Possible Values	:	1	Germany (DB-Initialization)
			2	English
			3	French
			4	Spanish
			5	Portuguese
			6	Dutch
			7	Danish
			8	Finnish
			9	Portuguese (Brazil)
			A	Italian
			C	Chinese
			C	chinese
			D	American-English
			E	Hungarian
			F	Polish
			H	Russian(CIS)
			N	Greek

SIUC	Selection of country specific SIU tone table
	Type of Input	:	Single value, optional (ADD, CHANGE)
	Possible Values	:	0	Germany (DB-Initialization)
			1	Austria
			10	Hungary
			12	Oman
			13	GUS
			14	Cameroon
			15	Israel
			16	South Korea
			17	Turkey
			18	Japan
			19	Vietnam
			2	Switzerland
			20	Kenya
			21	Zimbabwe
			23	Algeria
			24	Nigeria
			25	Congo
			26	Ethiopia
			27	Burundi
			28	Pakistan
			29	Yugoslavia
			3	Belgium
			4	Australia
			5	Spain
			6	South Africa
			7	Great Britain, Ireland
			8	Finland
			9	Portugal, Brazil
			A	France
			B	Netherlands
			C	China, Tanzania
			D	Italy
			E	Malaysia
			F	Poland
			G	Mexico
			H	Denmark
			J	Czech Republic
			K	USA
			L	Luxembourg
			M	Singapore
			N	Indonisia
			O	Thailand
			P	Philippines
			Q	Brazil
			R	Greece
			S	Hongkong
			T	Morocco
			U	Sweden
			V	DSN - A-law coding
			W	DSN - U-law coding

SOCOTYPE	SoftGate config type
	Type of Input	:	single value, optional (ADD, CHANGE)
	Possible Values	:	SOCO50	SoftGate with BCSU 50 STN port check
			SOCO1000	SoftGate with BCSU 1000 STN port check
			SOCO500	NO LONGER USED

SRCGRP	Source group index
	Type of Input	:	1 to 2 single values, concatenated with "&"
			optional (DISPLAY / CHANGE)
			Singe value, mandatory (ADD)
	Possible Values	:	1 - 99

TCLASS	Time class index
	Type of Input	:	Single value, optional (ADD, CHANGE -UNIT = AP)
	Possible Values	:	0 to 50
	Default Value	:	0

TEXTSEL	AP settings for individual language setting of display texts.
	Type of Input	:	1 to 5 single values, concatenated with &, optional
	Possible Values	:	AMERICAN	american english
			BRAZIL	brazil
			CATALAN	catalan
			CHINESE	chinese
			CROATIAN	croatian
			CZECH	czech
			DANISH	danish
			DUTCH	dutch
			ENGLISH	english
			ESTON	estonian
			FINNISH	finnish
			FRENCH	french
			GERMAN	german
			GERNOUML	german without umlauts
			GREEK	greek
			HUNGARY	hungarian
			INDONES	indonesian
			ITALIAN	italian
			JPN	japanese
			KOREAN	korean
			LATVIAN	latvian
			LITHUAN	lithuanian
			MALAY	malayan
			NORWEG	norwegian
			POLISH	polish
			PORTUG	portuguese
			ROMANIAN	romanian
			RUSSCYR	russian (cyrillic letters)
			RUSSLAT	russian (latin letters)
			SERBCYR	serbian (cyrillic letters)
			SERBLAT	serbian (latin letters)
			SLOVAK	slovakian
			SLOVEN	slovenian
			SPANISH	spanish
			SWEDISH	swedish
			THAI	thai
			TURKISH	turkish

UNIT	Type of unit to be processed
	Type of Input	:	Single value, optional (DISPLAY, REGENERATE)
			mandatory (ADD, CHANGE, DELETE)
	Possible Values	:	LTG	= LINE/TRUNK GROUP
				The LTG unit without its LTU and peripheral module configuration is processed. In duplex-systems, LTG halves A and B are processed.
			LTPARTNO	PARTNUMBER OF ADDING LTUC/NCUI MODULE
			LTU	= LINE/TRUNK UNIT
			LSRTADDR	AP PRIMARY ROUTER IP ADDRESS IN LS NET
				The LTU without its configuration of peripheral modules is processed.
			AP	= LINE/TRUNK UNIT access point for NBCS
			APRTADDR	IP ADDRESS OF AP FIRST-HOP ROUTER
				The LTU without its configuration of peripheral modules is processed.
			PARTNO	= cat. number (CHANGE)
				Change PARTNO of central SIU.
			SIPARTNO	CAT. NUMBER OF SIU/RTM FROM PART CATALOG
			SRCGRP	(DISPLAY)
	Default Value	:	LTU

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.