205.4 Error Messages and Advisories

205.4.1 Error Messages

 
F02:
LTU NOT ASSIGNED
F14:
LTU NOT ACTIVATED (ACTIVATION/DEACTIVATION IN PROGRESS)
 
(The AMO was interrupted because either an activation or a deactivation is being processed.)
F16:
LTU NOT DEACTIVATED (ACTIVATION/DEACTIVATION IN PROGRESS)
 
(The AMO was interrupted because either an activation or a deactivation is currently in progress.)
F18:
LTU NUMBER DOES NOT HAVE ADMISSIBLE VALUE. MAXIMUM VALUE: <ltu>
F19:
LTG NOT CREATED
F20:
LTG NUMBER DOES NOT HAVE ADMISSIBLE VALUE
F21:
SPECIFIED VALUE IS NOT VALID FOR THIS SYSTEM VARIANT
F22:
UNEXPECTED PROGRAMM STATE
F23:
LTG DOES NOT EXIST
F24:
[SIU|RTM] IS NOT ACTIVATED (DEF)
F25:
[SIU|RTM] IS NOT ACTIVATED (WBT)
F26:
[SIU|RTM] IS NOT ACTIVATED (ORDER ERROR)
F27:
ONLY ONE LTG EXISTS. THIS LTG CANNOT BE SWITCHED OFF
F28:
STANDBY-PROCESSOR NOT AVAILABLE
F29:
THE ONLY EXISTING LTG ON ACTIVE PBX MAY NOT BE SWITCHED ON.
ACCORDING LTU MAY BE SWITCHED ON BY MEANS OF
ACT-USSU:LTG,,;
F30:
ACTIVATION OF THE AP SHELF NOT POSSIBLE.FIRST EXECUTE
’EXEC-USSU:CONFAP’.
F31:
DEACTIVATION OF THE AP SHELF NOT POSSIBLE.FIRST EXECUTE:
’EXEC-USSU:UPDATAP’.
F32:
STARTUP CONNECTION NOT POSSIBLE.LTU STATUS MUST BE -UNACH-
F33:
STARTUP CONNECTION NOT POSSIBLE. CONNECTION TO AP SHELF IS ALREADY ACTIVE.
F34:
SHUT DOWN CONNECTION TO AP SHELF NOT POSSIBLE. FIRST DEACTIVATE AP BY USING ’DEACT-USSU’.
F35:
UPDATE NOT POSSIBLE. BACKGROUND LOADING IS IN PROGRESS.
F36:
RESET OF NCUI DATA NOT POSSIBLE.ALL DATA IN NCUI-FLASH ARE ACTUAL TO THE DATA IN NCUI RAM.
F37:
UPDATE NOT POSSIBLE. LTU STATUS MUST BE -READY-.
F38:
UNEXPECTED MESSAGE RECEIVED.PLEASE TRY THE LAST ACTION AGAIN.
F39:
LTU NUMBER ^ltu^ IS NOT IN -READY- STATE.
F40:
CONNECTION TO AP SHELF IS NOT -ACTIVE-.(LTU NUMBER = ^ltu^)
F41:
BACKGROUND LOADING NOT POSSIBLE. IT IS STILL IN PROGRESS.(LTU = ^ltu^)
F42:
BACKGROUND LOADING FOR LTU ^ltu^ FAILED BY TIME-OUT.
F43:
LOADING VIA FTP NOT POSSIBLE, CAUSE ANOTHER FTP IS ALREADY RUNNING.(LTU = ^ltu^).
F44:
LTU ^ltu^ NOT CONFIGURED.
F45:
THERE ARE NO DATA CONFIGURED BY MEANS OF AMO-STMIB.
THEREFORE THE CONNECTION TO THE AP CAN NOT BE SET UP.
PLEASE MAKE SURE THAT THESE ENTRIES ARE CORRECT.
F46
LTU STATE CHANGE OCCURED.LTU ^ltu^ IS NOT IN -READY- STATE ANYMORE.
F47
FOLLOWING FILES DO NOT EXIST ON HD. (LTU = ^ltu^) :
^lwfile^ ^tonfile^ ^recfile^ ^annfile^ ^mohfile^ ^tdsfile^
PLEASE COPY THE MISSING SIU FILES IN DIRECTORY :
:PDS:APSP/LTG/LG63/
AND THE MISSING LW FILE IN DIRECTORY :
:PDS:APSP/LTG/LGA0/
F48
THIS AMO ACTION CAN ONLY BE EXECUTED ON THE HOST SYSTEM.
F49
THE RTM BOARD IS NOT CONFIGURED. ( AMO-CPCI)
F50
THIS COMMAND CAN ONLY BE EXECUTED ON CPCI ARCHITECTURE.
F51:
ACTIVATION OF THE AP SHELF @@ NOT POSSIBLE SINCE NO MASTER ENCRYPTION KEY (MEK) HAS BEEN CONFIGURED YET.
F52:
THIS FUNCTION IS NOT ALLOWED FOR SOFTGATE SHELVES. AP @@ HAS BEEN IGNORED.
F53:
ACTIVATION OF THE AP SHELF @@ NOT POSSIBLE SINCE SOFTGATE IS NOT CONFIGURED PROPERLY YET.
F54:
TIMER EXPIRED WHILE WAITING FOR THE ACKNOWLEDGEMENT MESSAGE FROM DC (@@@ sec).
F55:
SWITCHING @@@@@ OF CGW BOARD IS NOT POSSIBLE, SINCE THE LINES FROM THE BOARD @@-@@-@@@ COULD NOT BE RELOCATED. ORIGINAL CONFIGURATION AND STANDBY MODES ARE MAINTAINED.
F56:
SWITCHOVER OF CGW BOARDS IS NOT POSSIBLE SINCE THE DESTINATION BOARD (OR LAN CONN.) @@-@@-@@@ IS NOT IN READY STATE.
F57:
SWITCHOVER OF CGW BOARDS IS NOT POSSIBLE SINCE THERE IS NO APPROPRIATE BOARD IN RECONFIGURATION POOL @@@@@.
F58:
POOL @@@@@ IS NOT CONFIGURED.
F59:
LTU @@ IS NOT IN ANY POOL.
F61:
SWITCHOVER NOT POSSIBLE. LTU STATUS MUST BE -READY- (LTU = @@)
F62:
COMMAND HAS NO EFFECT ON THIS HW. PLEASE DOWNLOAD LOGS FROM PORTAL.
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.