206.3.2 ACTIVATE-VADSM

ACTIVATE-VADSM can be used to activate a deactivated alarm.
This is possible also for alarms whose threshold values cannot be changed (see Table 1). When its threshold values can be changed, an alarm can also be activated using ’CHANGE-VADSM’.
Procedure Overview
 
Command Code
Parameter
ACTIVATE-VADSM
[UNIT=<param>],
 
ALARMGR=CENTRAL,ALARMNO=<range>;
 
 
 
|ALARMGR=PERIPHER,ALARMNO=<range>;
 
Example
Activate central alarm 13 in the ISp.
Input:
ACTIVATE-VADSM:UNIT=A1,ALARMGR=CENTRAL, ALARMNR=13;
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.