206.5 Error Messages and Advisories

206.5.1 Error Messages

 
F01:
ALARM NUMBER <ALARMNO> IS NOT USED;
 
FOR THIS REASON, CHANGE IS NOT POSSIBLE.
F02:
THE THRESHOLD VALUES FOR THIS CENTRAL ALARM ARE PRESET;
 
FOR THIS REASON, CHANGE IS NOT POSSIBLE.
F03:
THRESHOLD VALUE 2 MUST BE GREATER THAN THRESHOLD VALUE 1.
F04:
THE VALIDATION TABLE CANNOT BE LOADED FROM THE HARD DISK.
F05:
THE VALIDATION TABLE CANNOT BE WRITTEN TO THE HARD DISK.
F06:
DEVICE ALARM NOT POSSIBLE FOR THIS ALARM NUMBER
F07
DEVICE ALARM CAN NOT BE ACTIVATED,BECAUSE ONE UNIT
IS ALREADY SUPERVISED BY MINOR OR MAJOR ALARM
F08
CHANGE NOT POSSIBLE, BECAUSE THE ENTERED THRESHOLD = 1 UNIT
AND DEVICE ALARM ALWAYS SUPERVISES ONE UNIT
F09
CHANGE OF VALIDATION DATA FOR ALARM 13 NOT POSSIBLE
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.