207.6
Parameter Description
ALARMGR
Alarm group
Type of Input
:
Single value, mandatory (CHANGE)
Single value, optional (REGENERATE)
Possible Values
:
CENTRAL = central SWU alarm group
PERIPHER = peripheral SWU alarm group
LOGICAL = logical SWU alarm group
SLATIME = Time interval, within which the alarm ’BAD IP
CONNECTIVITY’ is activated
SNAPSHOT = Non existent sysrem elements submitted to or
excluded from alarm control
Default Value
:
all alarm groups (REGENERATE)
ALARMNO
Alarm number
Type of Input
:
Single value, optional (ADD, REGENERATE)
Single value, mandatory (CHANGE, DELETE)
Single value or range, optional (DISPLAY)
Possible Values
:
8-583 for ADD, DELETE
( 8- 519 ...... directional alarm
520 - 583 ... personal alarm)
0-583 for CHANGE
( 0 -
63 ... central SWU alarm
0 - 31 ... peripheral SWU alarm
1 - 583 ... logical SWU alarm)
0-583 for DISPLAY
( 0- 63
... TYPE=CENTRAL
0- 31
... TYPE=PERIPHER
1- 7 ... TYPE=LOGICAL and ANTYPE=SPEC
8 - 519 ... TYPE=LOGICAL and ANTYPE=DIR
520 - 583 ...TYPE=LOGICAL and ANTYPE=PERS
1-583 ... TYPE=ASS)
0-583 for REGENERATE
( 0-
63 ... ALARMGR=CENTRAL
0-
31 ... ALARMGR=PERIPHER
1 - 583 ... ALARMGR=LOGICAL)
Default Value
:
a free alarm number is searched for (ADD)
range of possible input values (DISPLAY)
all alarms in the specified alarm group
(REGENERATE)
ANTYPE
Type of logical alarm number (to be added)
Type of Input
:
Single value, mandatory (ADD)
Single value, optional (DISPLAY)
Possible Values
:
DIR = number of directioal alarm
PERS = number of personal alarm
SPEC = number of special alarm
(only for DISPLAY)
SLATIME = Time interval, within which the alarm
’BAD IP CONNECTIVITY’ is active
Default Value
:
DIR, PERS and SPEC (DISPLAY)
HWCONT
Hardware-Contact (Alarm Contakt)
Type of Input
:
Single value, optional (CHANGE, ADD)
Possible Values
:
SU
=Summary Signalization (see 0.1.1)
S1
= individual Signalization LED P2 (PAL) on IOP and NAL on DP
S2
= individual Signalization LED C3 (ZAL) on IOP and UAL auf DP
Default Value
:
SU
NAME
Alarm name
The alarm name can only be changed for directional and personal alarms.
The first four positions of the name of directional alarms must be unambiguous.
The name must not begin with the strings "P00" through "P99" or "R00" through "R99".
The string "FREE ALARM" must not be part of the name.
These restrictions must be observed for administrative reasons.
Type of Input
:
Single value, mandatory (ADD)
Single value, optional (CHANGE)
Possible Values
:
alphanumeric, up to 17 digits
PRIO
Priority
Type of Input
Single value, optional (CHANGE)
Possible values
0 -11 (see advisory message H12)
Default value
0
THRESHD1
Threshold for minor alarm
The value "65535" stands for deactivation of the minor alarm.
Type of Input
:
Single value, mandatory (ADD)
Single value, optional (CHANGE)
Possible Values
:
0-65535 ... for central alarm group
0-100 in percent and
65535 ..... for peripheral and logical alarm group
THRESHD2
Threshold for major alarm
The value "65535" stands for deactivation of the major alarm.
Type of Input
:
Single value, mandatory (ADD)
Single value, optional (CHANGE)
Possible Values
:
0-65535 ... for central alarm group
0-100 in percent and
65535 ..... for peripheral and logical alarm group
TIME
Validation time for single device alarm in hours
Type of Input
:
Single value, mandatory (CHANGE)
Possible Values
:
0-255
TIME1
Validation time for minor alarm in seconds
Type of Input
:
Single value, mandatory (ADD
Single value, optional (CHANGE)
Possible Values
:
0-65535
TIME2
Validation time for major alarm in seconds
Type of Input
:
Single value, mandatory (ADD
Single value, optional (CHANGE)
Possible Values
:
0-65535
TYPE
Type of DISPLAY (special alarm group or assignments)
Type of Input
:
Single value, optional
Possible Values
:
CENTRAL = central SWU alarm group
PERIPHER = peripheral SWU alarm group
LOGICAL = logical SWU alarm group
ASS = assignments
Default Value
:
all alarm groups and assignments
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.