207.7 Error Messages and Advisories

207.7.1 Error Messages

 
F01:
ALARM NUMBER <ALARMNO> ALREADY EXISTS.
F02:
NO DIRECTIONAL ALARM NUMBER (8-519) FREE.
F03:
NO PERSONAL ALARM NUMBER (520-583) FREE.
F04:
THRESHOLD VALUE 2 MUST BE GREATER THAN THRESHOLD VALUE 1.
F05:
ALARM NAME IS IMPLAUSIBLE.
F06:
THE FIRST FOUR POSITIONS OF THE NAMES OF DIRECTIONAL ALARMS
 
MUST BE UNAMBIGUOUS.
F07:
ALARM NUMBER <ALARMNO> IS NOT USED; FOR THIS REASON, CHANGE IS NOT POSSIBLE.
F08:
THE THRESHOLD VALUES FOR THIS CENTRAL ALARM ARE PRESET;
 
FOR THIS REASON, CHANGE IS NOT POSSIBLE.
F09:
ONLY THE NAME OF DIRECTIONAL AND PERSONAL ALARMS MAY BE CHANGED.
F10:
ALARM NUMBER <ALARMNO> DOES NOT EXIST.
F11:
ALARM NUMBERS 1 AND 2 (SPECIAL ALARMS) MUST NOT BE ACTIVATED SIMULTANEOUSLY.
 
ALARM NUMBER <1/2> CAN ONLY BE ACTIVATED WHEN ALARM NUMBER <2/1> WAS DEACTIVATED
F12:
THE VALIDATION TABLE CANNOT BE LOADED FROM THE HARD DISK.
F13:
THE VALIDATION TABLE CANNOT BE WRITTEN TO THE HARD DISK.
F14:
DEVICE ALARM NOT POSSIBLE FOR THIS ALARM NUMBER
F15:
WHEN ONE UNIT IS SUPERVISED BY MAJOR OR MINOR ALARM,
DEVICE ALARM CAN NOT BE ACTIVE AT THE SAME TIME
F16:
CHANGE NOT POSSIBLE, BECAUSE THE ENTERED THRESHOLD = 1 UNIT
AND DEVICE ALARM IS ACTIVE, WHEN ALWAYS SUPERVISES ONE UNIT
F17:
NO RESPONSE FOR THE SNAPSHOT MESSAGE FROM DEVICE CONTROL
F18:
BEGINTIME @@H,@@M DOES NOT LIE BEFORE ENDTIME @@H,@@M.
F19:
NEGATIVE RESPONSE FOR THE SNAPSHOT MESSAGE FROM DEVICE CONTROL
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.