214.4.6
REGENERATE-VOICO
The verb REGENERATE is used to output the data of the Voice Compression table in the form of one or more position-oriented ’ADD’ commands. The command can be regenerated for a specific PEN1.
It is possible that one of both or both circuits of one VC-connection that is marked as active, is/are deactivated by AMO-DSSU. In this case a DEACT-DSSU has to be regenerated before the ADD-VOICO-command, respectively an ACT-DSSU-command has to be regenerated after the ADD-VOICO-command for each deactivated circuit.
Procedure Overview
Command Code
Parameter
REGENERATE-VOICO
[PEN1=<pen>];
Examples
1.
Regenerate VC connections for VCM PEN: 1-1-49-0.
Input:
REGEN-VOICO:1-1-49-0;
Output:
ADD-VOICO:1-1-49-0,1,1-2-55-0,5,N;
ADD-VOICO:1-1-49-0,2,1-2-55-0,4,N;
2.
Regenerate the table for all configured VCM boards.
Input:
REGEN-VOICO:;
Output:
ADD-VOICO:1-1-49-0,1,1-2-55-0,5,N;
ADD-VOICO:1-1-49-0,2,1-2-55-0,4,N;
DEACT-DSSU:DC,PEN,1-2-55-0;
DEACT-DSSU:DC,PEN,1-1-43-0;
ADD-VOICO:1-1-43-0,1,1-2-55-0,3,Y;
ACT-DSSU:ACL,PEN,1-1-43-0;
ACT-DSSU:ACL,PEN,1-2-55-0;
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.