214.6 Error messages and advisories

214.6.1 Error messages

 
F01:
THE ADMISSIBLE RANGE FOR <param> IS: <number> TO <number>
 
Input range has been exceeded.
F02:
NOT POSSIBLE LOADING THE ’UBGDAT00’ SUBSYSTEM
 
The board data can not be loaded.
F03:
ON PEN <ltg-ltu-slot> IS NO <bgtype> BORD CONFIGURED
 
On the entered pen is no board configured or the configured board is not a VCM/S0/S2 board. Configuration by AMO BCSU.
F04:
INSUFFICIENT MEMORY (AMO DIMSU: PARAMETER VOICO, TYP=CC)
 
The system table in DB is too small, erlarge by AMO-DIMSU.
F05:
FOR VCSU <number> NO B-CHANNAL ON VCM BOARD HAS BEEN CONFIGURED
ADD WITH AMO-TDCSU
 
For the entered VC connection at least one B-channel has to be configured on the VCM board (VCSU).
F06:
CIRCUIT <number> ON S0/S2 BOARD HAS NOT BEEN CONFIGURED
ADD WITH AMO-TDCSU
 
The entered circuit of the partner board is not configured and has to be configured with AMO-TDCSU.
F07:
FOR VCM BOARD VCSU 1 HAS TO BE CONFIGURED FIRST
 
The VCconnection VCSU 1 has to be configured always first.
F08:
VCSU <number> HAS TO BE CONFIGURED ON SAME PARTNER BOARD: <ltg-ltu-slot>
AS VCSU 1
 
All VC connections has to use the same partner pen as VCSU 1 .
F09:
VCSU <number> HAS ALREADY BEEN CONFIGURED
 
The entered VCSU number has already been configured.
F10:
B-CHANNAL <number> OF PARTNERBOARD HAS ALREADY BEEN CONFIGURED
 
The entered B-channel number has already been configured.
F11:
VCSU <number> IS NOT CONFIGURED
 
The entered VC connection (VCSU) is not configured or already deleted.
F12:
VCSU 1 HAS TO BE DELETED AT LAST ONE
 
The VC connection to VCSU1 has to be deleted always last.
F13:
THE VCSU <number> HAS TO BE DEACTIVATED BEFORE ACTION DELETE
 
An active VC connection can not be deleted.
F14:
FOR <action> A VCSU THE CIRCUIT OF <type>PEN (<ltg-ltu-slot-circuit>)
HAS TO BE DEACTIVATED (DEACTIVATE WITH AMO DSSU)
 
<action> ACTIVATE or DEACTIVATE
<type> VCM or PARTNER
F15:
FOR VCM BOARD VCSU 1 HAS TO BE ACTIVATED FIRST
 
The VC connection VCSU1 has to be activated always first.
F16:
<action> OF VCSU <number> HAS BEEN REJECTED FROM DC
 
<action> ACTIVATE or DEACTIVATE
Unknown error at Device Control. A softrestart could solve the problem.
F17:
FOR VCM BOARD VCSU 1 HAS TO BE DEACTIVATED AT LAST
 
The VC connection VCSU1 has to be deactivated always last.
F18:
THERE ARE NO MORE FREE TIMESLOTS AVAILABLE
 
For the VC connection if was not possible to reserve free timeslots. Probably too many connections are active.
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.