10.2.17.3.1. Access Point with the same Settings as the Host System 
The parameters are first configured for the host system (e.g. German,
English, French, Spanish and Italian):
CHANGE-ZAND:TYPE=ALLDATA2,TEXTSEL=GERMAN&ENGLISH&FRENCH&SPANISH&ITALIAN; CHANGE-ZAND:TYPE=OPTISET,LANGID=GERMAN&ENGLISH&FRENCH&SPANISH&ITALIAN;
The same texts/character sets as for the host system can now be used
for an Access Point:
If the TEXTSEL and SPRACHID parameters are not specified,
they will be taken automatically from the central settings:
ADD-UCSU:UNIT=AP,LTG=1,LTU=17,LTPARTNO="Q2324-X ",SRCGRP=17,FRMTYPE=AP37009, CONNTYPE=APDL,LSRTADDR=198.16.16.63,APRTADDR=198.16.16.150,LOCID=017,LOCATION="LOCATION", PHONE=3140,FAX=3141,PLCHECK=YES,BCHLCNT=60,CONVLAW=NO,TCLASS=0,ALARMNO=0,SIUANN=1,SIUC=0, DTR=0,CNTRYCD=0;
The TEXTSEL and SPRACHID parameters can also be specified
with the same values however:
ADD-UCSU:UNIT=AP,LTG=1,LTU=17,LTPARTNO="Q2324-X ",SRCGRP=17,FRMTYPE=AP37009, CONNTYPE=APDL,LSRTADDR=198.16.16.63,APRTADDR=198.16.16.150,LOCID=017,LOCATION="LOCATION", PHONE=3140,FAX=3141,PLCHECK=YES,BCHLCNT=60,CONVLAW=NO,TCLASS=0,ALARMNO=0,SIUANN=1,SIUC=0, DTR=0,CNTRYCD=0,TEXTSEL=GERMAN&ENGLISH&FRENCH&SPANISH&ITALIAN, LANGID=GERMAN&ENGLISH&FRENCH&SPANISH&ITALIAN;